* refactor(schemas): share identifier and canonical base64 patterns
* test: hold the offset datetime schema to the validator it replaces
The module documents that its accepted set matches z.string().datetime({ offset: true }), and nothing in the suite checked that claim. Adds table-driven accept and reject cases (leap years including the 1900/2000 century pair, month, day, hour and offset ranges, fractional and omitted seconds, missing offset, basic format) plus a differential assertion that classifies every case exactly as the replaced validator does, and asserts the emitted pattern compiles under u and v while the replaced pattern does not compile under v.
---------
Co-authored-by: felipeatp <felipe.troncosopt@gmail.com>
inspect_keyed_archive runs on every host, but its remediation for an
ordinary property list pointed to inspect_plist, which only macOS
supports. On Linux that sent callers to a workflow the capability layer
rejects.
The domain error now names what the file is. The artifact reader picks
the remediation from the provider's host: inspect_plist on macOS, and
elsewhere the selection of an NSKeyedArchiver archive, with a note that
inspect_plist requires macOS. decode_interface_builder, which is
portable, stays the NIBArchive remediation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
inspect_keyed_archive reported a selected ordinary property list or a
compiled NIBArchive as a damaged artifact: "Artifact is invalid or has
changed. Get a fresh copy and try again." The file is intact; it is
another kind of file, and the workflow that reads it (inspect_plist or
decode_interface_builder) appeared only in details.detail.
Report a NIBArchive, or a plist whose $archiver is not NSKeyedArchiver,
as unsupported_target with that workflow as the remediation. An
NSKeyedArchiver archive that fails to decode stays a format failure.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Node's execFile timeout contract differs by supported runtime: Node 22
and 24 accept any non-negative integer (their timers clamp anything
above 2^31-1 to 1 ms), while Node 26 caps it at Number.MAX_SAFE_INTEGER.
Mirroring either left stoppable and plain commands disagreeing on one
runtime. Validate a safe non-negative integer before spawning in both
modes, so every supported runtime gives the same answer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix: emit v-mode-compatible patterns for tool schemas
Character classes in emitted patterns carried unescaped '-', '/' and '['. Annex-B and u-mode accept them, so REA's own Zod validation (u) and every u-based validator never saw a defect, but v-mode rejects ClassSetSyntaxCharacters and Ruby rejects [^s[]]. With 6.1.0 tools/list, 117 pattern fields across 11 tools were rejected under v.
The characters are escaped as \x2d, \x2f, \x5b and \x5d rather than \-/\//\[, because oxlint --fix removes an escaped '-' inside a character class as a useless escape, so an escape-only change does not survive the pre-commit hook. \x2d-style escapes are valid under Annex B, u and v, are matched identically, and are not useless-escape candidates.
22 pattern literals in 18 files are touched; no other token changes.
* fix: replace the Zod offset pattern and guard the advertised catalog
The offset datetime site projected Zod's offset class as [ +- ], which no escape in this repository's sources can reach, so evaluate_reconstruction_coverage stayed unreachable for exactly the clients this change targets. It now uses offsetDateTimeSchema in src/domain/offsetDateTime.ts: the same accepted set with the offset class escaped as [ +\x2d ].
Adds tests/boundary/mcp/advertisedPatternsVMode.test.ts, which performs the real tools/list projection, traverses every advertised input and output schema, compiles each pattern under v, and asserts the inventory it walked so a silent traversal collapse fails instead of passing vacuously.
The version-mismatch reason ends with the tool's complete stderr, which
is too long for a caller-facing message. The message now names the
expected and reported version and exit code; details.reason keeps the
stderr.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since a stoppable command keeps its own deadline, execFile no longer
validated its timeout. A negative, NaN, fractional or infinite value
then started the command with no deadline (or one setTimeout coerced)
instead of failing with ERR_OUT_OF_RANGE as execFile does.
Apply execFile's unsigned-integer contract before spawning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The real-lipo slice test pinned the byte offsets and sizes of one macOS
release's /bin/ls, so it failed on any host whose /bin/ls differs
(macOS 26.7.1: x86_64 48128 bytes, arm64e 88672, versus the pinned 48112
and 89088). Read the expected layout from the binary's FAT header
instead.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Host and tool-configuration refusals from the pwntools, EVMole, firmware,
mitmproxy, Wakaru, LLDB and xcrun adapters carried no userMessage, so CLI
and MCP callers saw the generic "This analysis is unavailable for the
current target. Choose another analysis or target." as both message and
remediation. Choosing another target cannot satisfy a Linux-only profile
or an unset REA_*_COMMAND. The actual requirement appeared only in
details.reason.
Pass each refusal's reason as its userMessage, as the adapters' other
configuration refusals (EVMole limits, JADX, pwndbg) already do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(ghidra): classify modern Swift manglings in swift type analysis
Categorize modern Swift 4.2+ manglings ($s, _$s) instead of dropping them
in analyze_swift_types. The classifier only accepted the legacy _Tt marker,
so procedure names reported by current providers produced an empty inventory.
Legacy _Tt families and behavior are unchanged. Fixes#1187.
* fix(swift): retain provider aliases and category unknowns
---------
Co-authored-by: Saim Shafique <sx4imm@gmail.com>
Co-authored-by: morluto <76467478+morluto@users.noreply.github.com>
The installation inspection rejected a relative JAVA_HOME, but only after
it had already probed `<JAVA_HOME>/bin/java` with spawnSync. `rea doctor`
and `rea setup` therefore ran whatever `jdk/bin/java` (or `bin/java` for
an empty JAVA_HOME) the current directory held, while reporting the
setting as rejected.
Skip the probe when JAVA_HOME is not absolute on the inspected platform.
The configuration check still reports the rejection.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
execFileOutput forwarded stopSignal only together with an AbortSignal, so
a caller with just a timeout (the native UI helper's swiftc build) still
got Node's SIGTERM. When the timeout did send the stop signal, nothing
killed a process that ignored it, and a process that exited cleanly
after the signal resolved as a success.
A stoppable command now owns its timeout: it sends the stop signal,
kills the process after the grace period, and rejects with ETIMEDOUT
and killed: true.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Move whole-graph commitment and batched integrity checks into owned domain steps while retaining eager input capture, canonical IDs, full validation and completion-only immutable proofs.
Verified complete real Notion identity parity and actual stdio MCP cancellation, Evidence retention and connection reuse.
Refs #1065.
Add explicit summary, facet, item and paged views of retained analysis Evidence without repeating analysis. Preserve captured observations, graph validation, artifact identity, coverage and complete default results.
Fixes#1050
Verified with focused source, CLI, pinned-SDK schema and MCP tests, serial static checks, and one complete native Windows Notion ASAR workflow. Real Hopper/Ghidra verification was not performed for this provider-independent projection change.
Co-authored-by: Matt Van Horn <455140+mvanhorn@users.noreply.github.com>
* fix: Handle relayed SIGINT gracefully in withProcessCancellation
Changes `process.once` to `process.on` for SIGINT in `DirectAnalysis.ts`.
When REA is launched via npx, a single process-group SIGINT triggers two
SIGINT events (one direct, one relayed). Previously, the first event would
consume the handler and the second would abruptly terminate the Node process,
abandoning Ghidra resource cleanup.
This change ensures subsequent SIGINTs idempotently request cancellation
without crashing the process, matching the behaviour of `withCommandCancellation`.
* fix(cli): keep termination guards through provider cleanup
* test(cli): exercise repeated analysis signals on macOS
---------
Co-authored-by: N0zoM1z0 <1705004398@qq.com>
When removing Ghidra's private runtime directory failed, close_binary
reported only a generic `provider-client` resource, and a later close,
after the permission was restored, returned success while the directory
and its contents remained. The client dropped its reference to the root
before removing it, and PrivateRuntimeRoot cached the rejected removal.
Keep each runtime or socket root until its removal succeeds, report a
failure as a ProviderCleanupError naming the leftover paths, let
PrivateRuntimeRoot retry a failed removal, and pass such typed cleanup
failures through closeAnalysisClient instead of replacing them.
Fixes#1190
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A relative GHIDRA_INSTALL_DIR (or JAVA_HOME) that resolved from the current
directory passed doctor's Ghidra inspection, so doctor reported a healthy
provider and setup wrote the relative path into the MCP registration, but
REA's configuration parser rejects relative paths, so `providers`,
`capabilities` and the registered MCP server all failed.
The installation inspection's configuration check now applies the same
absolute-path rule, judged by the inspected platform's path syntax, and
names the relative setting. Doctor reports the provider unavailable with
that reason, and setup, which registers only an available inspection's
environment, no longer writes the path.
Fixes#1183
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An unsupported-target error always projected the generic "select a target"
remediation, which hid the adapter's available workflows (omit
REA_GHIDRA_NATIVEAOT_JAR for ordinary analysis, or use
inspect_managed_artifact). AnalysisUnsupportedTargetError accepts a
refusal-specific remediation, as AnalysisResourceConstraintError does, and
the NativeAOT refusal supplies its reason.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Kaoru0822