* fix(ghidra): name every admitted family in the architecture refusal
The refusal listed x86, x86_64, arm, arm64, MIPS, RISC-V, raw 6502 and
raw m68k, but the admission set also holds powerpc and hexagon. Build
the text from SUPPORTED_ARCHITECTURES, marking raw-only families, so a
newly admitted family cannot be left out again, and name the refused
family.
* fix(hopper): stop calling the Ghidra Hexagon lane verified
Hopper declined Hexagon targets with "Select a verified Ghidra Hexagon
profile instead", but REA has no verified Hexagon lane. Record whether
each declined family's Ghidra lane is verified, and say that Ghidra
admits Hexagon through an unverified lane.
Name declined families by architecture id, as the Ghidra and IDA
refusals do.
* fix(ghidra): name the pinned language in profile readback refusals
The session readback said "MIPS" whenever a provider-pinned profile
conflicted with the target or with REA_GHIDRA_LANGUAGE_ID, although the
RISC-V, PowerPC and DOL lanes are pinned too. The readback helper was
MIPS-named and re-parsed the language slot that
ghidraProfileLanguageOverride already owns. Move it beside that owner as
a family-neutral readback and name the pinned language id instead.
* fix(ghidra): list DOL among independently verified load images
GameCube DOL load images are independently verified, but the declined
format reason, the inspect_native_load_image capability note and the
Windows P0 guide listed only DOS MZ, DOS COM and raw-binary.
* fix(ghidra): count RV32E's sixteen integer registers
The EF_RISCV_RVE refusal described a 15-register ABI. RV32E has 16
integer registers, x0-x15, as docs/ghidra-riscv.md already says.
* fix(elf): name the refused e_machine
"unsupported ELF architecture" did not say which machine was refused.
Include the numeric e_machine, for example EM_XTENSA 94.
* test(hopper): assert declined-lane facts and owned refusal reasons
The MIPS case banned the phrase "not verified" instead of checking
facts, so wrong advice would still pass. Expose each declined family's
Ghidra lane status, assert those statuses, check that the advice depends
on the status, and compare Hopper's refusals with
hopperDeclinedArchitectureReason. The RISC-V refusal table now compares
the provider's reason with ghidraRiscvUnsupportedReason and expects the
EF_RISCV_RVE declaration name rather than fixed wording.
* test(ghidra): assert verified load-image formats as owned facts
The declined-format test required display phrases such as "DOS MZ" and
"GameCube DOL", so harmless rewording failed it while wrong guidance
containing those names passed. The format list was also spelled three
times: in the attestation's membership check, its reason and the
inspect_native_load_image capability note. Give the verified formats one
owner with the formatters for both texts, assert the list as a fact, and
compare the delivered reason and capability note with those formatters.
* fix(hopper): stop restating which Ghidra lanes REA has verified
Hopper's refusal for families it declines carried its own table of
which Ghidra lanes REA has verified (mips, riscv and powerpc verified,
hexagon not). That restated the Ghidra provider's facts in Hopper and
goes stale whenever they change, the drift that made the Hexagon refusal
wrong in the first place. Reading Ghidra's facts from Hopper would
couple the providers instead; no module in src/hopper imports from
src/ghidra.
The table and hopperDeclinedGhidraLane are removed.
hopperDeclinedArchitectureReason now states only what Hopper owns: it
does not admit the family, and the Ghidra provider's lane reports
whether REA has verified it. The arm64_32 sentence is unchanged.
The test checks every declined family against the formatter: each
reason names the family and Ghidra, and apart from the name all reasons
are the same text, so none states a per-family Ghidra status.
* fix(hopper): route declined families to Ghidra without promising its lane facts
The refusal said the Ghidra lane reports whether REA has verified it, but
Ghidra admits Hexagon with no such note, so a caller could not find the
promised status. Hopper now only states that it does not admit the family
and routes the caller to the Ghidra provider.
The inventory registry gained read_binary_inventory_summary, so the
read-only inventory is fifteen inventory and twelve function operations.
Update the adapter summary and the Windows lane descriptions to match the
registries the Windows verifier derives its coverage from. The historical
Windows verification record keeps its observed 26-operation count.
Fixes#7611
Admit same-major Ghidra releases at or above the verified minor through the existing compatible/unverified policy. Preserve the observed version, verified12.1.4 pin, installation-declared Java floor and separate NativeAOT verification gate.
367 targeted tests/static/docs, all10 real Java bridge-source compilation, and actual Linux12.2/JDK25 CLI/MCP queries and cleanup pass. JDK21 remains refused for12.2. Exact-main controls reproduce all3 unrelated CI assertions; canceled shards and an apt-blocked binary-layout lane remain unverified.
Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com>
When Smart App Control or an App Control policy refuses
rea-windows-x64.node, the loader reported the failure as the artifact
stage. Doctor and provider diagnostics then told the user to restore or
rebuild the native files, although their version and SHA-256 had
already matched the package manifest.
The loader now tags a failure of the module load itself, after the
manifest and digest checks pass, as the load stage. The reason keeps the
Windows error text and says that restoring the file cannot help, that
Ghidra and JADX need the native controls, that rea setup can still
register clients, and that REA must run where policy allows the file or
the maintainers can be asked about a signed build. Readiness keeps the
documented runtime_missing code for unloadable artifacts.
Setup does not depend on the native controls: with the addon
unavailable, the published 6.7.0 CLI still planned and applied the
claude_code registration, so no setup gate is changed.
Fixes#5723
Require Node.js ^22.23.4 || ^24.22.1 || >=26.12.1 across package engines, setup/doctor and the standalone installer. Validate patch boundaries and maintain runtime-independent listener identity, heap-option and HTTP schema-binding tests.
Closes#6283
Refs #6480
BREAKING CHANGE: Node versions below 22.23.4, 24.22.1 and 26.12.1 are no longer supported. Upgrade Node before installing or updating REA; the installer does not upgrade Node.
Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com>
Admit Windows ARMNT/Thumb-2 and ARM64 PE targets using preserved COFF machine facts. Keep unsupported machine gates explicit and distinguish loader-selected versus configured language provenance.
Verified with real Windows Ghidra 12.1.4 CLI/MCP workflows, ARM fixtures and Microsoft-signed Coreinfo ARM64 / MSVCR120 ARM inputs. Resource limits, analyzer overrides, startup timeout observations and verification gaps are documented in the PR. Final CI and automated review passed.
Fixes#2186
Share tagged readiness observations, retain partial provider facts, authenticate bridge identity, bound diagnostics, and preserve cancellation and lost-session reasons. Fail closed for unparsed MIPS ABI attributes and macOS saved Hopper databases without a script-capable bridge route.
Reviewed fixes: #2010, #2108, #2513, #2695, #2731, #2771, #2828, #2867, #2868, #2870, #2880, #2919, #2945, #2961, #2981, #2998, #3000, #3002.
Validation: 285 focused source/boundary tests passed. Real Ghidra, IDA, Linux Hopper, and Windows provider runs were not repeated.
BREAKING CHANGE: MIPS targets with unresolved GNU ABI attributes and saved Hopper databases on macOS are refused rather than advertised as supported.
* feat(ghidra): admit raw NMOS 6502 analysis
* test(ghidra): require verified POSIX verifier cleanup
* test(ghidra): verify 6502 low-memory raw imports
* docs(skill): document raw NMOS 6502 support
* fix(ghidra): preserve requested Windows raw source paths
* docs(ghidra): include raw 6502 in Windows installation scope
* test(ghidra): verify Windows raw junction rejection through CLI and MCP
* fix(validation): make fixtures portable and preserve explicit Codex home
* fix(ghidra): attest raw mapping state and address space
* fix(ghidra): align diagnostics and regression groups
* fix(ghidra): bind raw attestation to language address space
* chore(ghidra): avoid verifier insertion conflict
* docs(ghidra): align linked raw admission guides
* fix(ghidra): retain 6502 verifier workspace on failure
* test(ghidra): isolate Windows authority doctor fixture
* fix(binary): re-admit Windows raw paths on session reopen
* test(binary): require fresh provider execution after path change
* Constrain 6502 to raw lifecycle and snapshot targets
* Bypass saved reads for unadmitted Windows paths
* Guard direct CLI snapshot replay on Windows paths
* fix(snapshot): gate Windows Ghidra replay on native admission
* fix(snapshot): constrain nested 6502 subjects to raw images
* test: make dyld slice fixtures portable
* fix(windows): preserve caller affinity only within one processor group
`spawnProcess` read the caller's affinity mask and applied it to the
suspended child unconditionally. A mask names processors relative to one
processor group, and Windows assigns each new process to a group of its
own choosing, so on hosts with more than 64 logical processors the child
is often placed in another group. `SetProcessAffinityMask` then rejects
the mask with ERROR_INVALID_PARAMETER (87) and the spawn fails, making
every owned provider process start intermittently on such hosts.
Affinity is a nicety, not an authority or isolation control, so it is now
applied only when the caller and the suspended child both occupy the same
single processor group. A child placed in another group keeps that group's
default affinity and the spawn proceeds. Job Object membership,
kill-on-owner-close policy, owner normalization and priority preservation
are unchanged, and the mask failure remains fatal within a shared group,
where it is not expected.
Single-group hosts, including every host with 64 or fewer logical
processors, are unaffected: `GetProcessGroupAffinity` reports one group
for both processes and the same mask is applied as before.
The optional process-boundary fixture gains an `affinity` observation,
and the native verification lane asserts that an owned spawn succeeds and
that the child's mask matches the caller's whenever both share a single
group.
Fixes#2181
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* fix(windows): refuse to widen a pinned caller's affinity across groups
Addresses review feedback on the first commit.
An unconstrained caller loses nothing when Windows places an owned child
in another processor group, so that spawn proceeds with the group's
default. A caller deliberately pinned to fewer processors than its group
holds is a different case: silently accepting the default would hand the
provider tree the whole group, which `docs/installation.md` tells
operators to rely on affinity to prevent. Such a spawn now fails naming
the constraint instead. `GetProcessAffinityMask` already reports the
group's active set, which distinguishes the two without another query.
Selecting the caller's group at creation through
PROC_THREAD_ATTRIBUTE_GROUP_AFFINITY was tried first and rejected:
`CreateProcessW` fails with ERROR_INVALID_PARAMETER on a host with a
single processor group, both alongside PROC_THREAD_ATTRIBUTE_JOB_LIST and
on its own, so it cannot carry the ordinary path.
The boundary fixture's affinity observation now reports a process id's
own mask rather than its own, because a separate probe process is
assigned its own group and cannot stand in for the process that spawns
the child. Masks and the group's active set cross as fixed-width
hexadecimal strings: a mask can set bits above the safe-integer range,
where `JSON.parse` would round two different masks to one value.
The verification lane asserts the mask is inherited exactly when caller
and child share a group, and otherwise that the caller was unconstrained.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* docs(windows): record what owned-process affinity does not preserve
A mask covering its group's whole active set does not distinguish a
caller the system placed in that group from one that selected the group
deliberately, so an owned child can still be placed elsewhere with its
processor count bounded and its group placement lost. Treating that case
as constrained instead is not available: on a multi-group host an
ordinary process is assigned a group by the system and its mask is that
group's active set, so refusing it would fail every owned spawn there.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Put setup, developer commands, MCP replies, and investigation recipes before
client details and implementation references. Preserve existing guide anchors,
examples, provenance, partial-result recovery, and provider restrictions.
Correct verified documentation drift, synchronize the Ghidra capability
wording, and regenerate metadata for skill version 40. Keep uncertain platform
and lifecycle findings unchanged. Refs #2156.
Validation: 56 focused tests, check:fast, docs:check, VitePress production build,
format and link/example checks. Real isolated CLI/MCP probes cover Ghidra,
NativeAOT, HAR, cancellation, Chrome, large ELF delivery, native type limits,
and the new JS/managed/process/setup recipes. Heavy work uses two CPUs;
a resource-heavy DOM probe was stopped and replaced by a smaller real CDP
payload-limit control. Windows, macOS GUI, ADB, and the full CI matrix were
not executed.
Co-authored-by: factory-droid[bot] <138933559+factory-droid[bot]@users.noreply.github.com>
* fix(ghidra): admit the 12.1 line and the install's JDK range
The provider treated the verified Ghidra 12.1.4 build and JDK 21 as the only
legal installation, so a working 12.1.x package or a newer JDK was rejected
before analysis started.
Admission now follows the 12.1 release line and application.java.min/max.
A compatible build other than 12.1.4 keeps its observed version and records
that the bridge was verified against 12.1.4.
Fixes#821
* fix(ghidra): stop pinning the NativeAOT build to one version string
The build script still rejected every Ghidra release except the literal
12.1.4 and every javac except major 21. It now accepts the 12.1 line and
javac 21 or newer, compiles with --release 21, and records the observed
Ghidra version. The JADX engine version uses the audited release constant.
* fix(ghidra): report unverified builds on analysis results
Session open uses health only as a startup gate and discards that
execution, so the unverified-build limitation never reached CLI or MCP
results. Attach it to every Ghidra execution for that install.
---------
Co-authored-by: Cursor Agent <cursoragent@cursor.com>
* feat(ghidra): enable Windows x64 read-only analysis
* test(ghidra): exercise native Windows runtime boundaries
* test(ghidra): verify current Windows inventory and isolate ACL observer
* fix(ghidra): align Windows admission and address P0 review
* feat(setup)!: expand agent integrations and simplify onboarding
Add native configuration formats for OpenCode, Antigravity, GitHub Copilot
CLI, VS Code, and Devin. Preserve JSONC comments and unrelated settings
while making setup and uninstall ownership-aware and idempotent.
Select agent targets before planning, separate discovery from intent, and
keep agent-only setup independent of optional provider prerequisites.
Cover configuration boundaries and interactive behavior in packaged checks.
BREAKING CHANGE: unscoped setup refreshes only existing REA-owned
registrations. Use --all-detected to configure every detected client.
Setup JSON contains a compact doctor summary; use rea doctor for full
diagnostics. Cancellation and successful dry runs now exit successfully.
* feat(cli)!: replace upgrade with verified updates
Resolve an exact release through npm's configured registry, update only the
identified installation, and verify its new executable before reporting success.
Return a read-only maintenance plan for existing enabled REA integrations.
BREAKING CHANGE: replace rea upgrade with rea update; no alias is retained.
Successful update JSON uses status "updated", reports the verified installed
version, and returns an unapplied maintenance plan instead of opening setup.
* fix(hopper): report unavailable procedure body coverage
* refactor!: simplify runtime tools and remove replay engines
Keep direct inspection, capture, and comparison tools. Bind handlers to named contracts and let agents compose experiments with commands and local fixture servers.
BREAKING CHANGE: Remove controlled replay, Node characterization, finite replay-machine, managed runtime planning, and redundant string-tracing tools. Retire process replay, shims, reactive scenarios, custom checkpoints, and active browser replay and origin-scope inputs.
Entrpi