mirror of
https://github.com/morluto/rea.git
synced 2026-11-21 06:04:03 +00:00
5664a6fbd4d1d61baa981ffed0633ccb2b66e2ac
15
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
d380dc2409 |
feat(uefi): add pure-TypeScript UEFI firmware analysis tools (#12342)
* feat(uefi): add pure-TS UEFI firmware volume/FFS parser with inspect/extract tools
Add a dependency-free rea-uefi provider that maps AMI/Aptio flash images:
- inspect_uefi_firmware: aligned _FVH discovery, volume-relative FFS walking,
guided section/compression classification, conservative PSP-directory probing,
embedded-volume rescan and leftover-region classification; incremental SHA-256
and explicit integrity notes.
- extract_uefi_firmware: whole-image/volume/FFS-file/section extraction with
LZMA-custom/LZMAF86 and AMD-zlib decoding, SafeOutputTree staging, derivations
and extraction_gaps.
- UefiArtifactReader + 'uefi' format wiring across inventory/domain/contracts
so parsed volumes and extracted PE32/TE files hand off to deep-provider
analysis (open_binary -> Ghidra).
* feat(uefi): add inspect_uefi_nvram for AMI NVRAM variable stores
Add a pure-TypeScript tool that maps the vendor AMI NVRAM variable stores
(factory-default "StdDefaults" and peers) inside a flash image:
- scan the raw image for NVAR entry chains ("NVAR" + u16 total size +
u32 attribute 0x8[23]FFFFFF + state + NUL-terminated name + data),
- recurse into a container entry whose data is itself an NVAR chain, so the
StdDefaults setup variables surface as depth/parent_offset rows,
- report attributes, state, data range, SHA-256 and trailing padding per entry.
Verified against B550 AORUS Elite V2 FId: one StdDefaults store at 0x37090 with
the 11 expected nested variables (Setup, PlatformLang, AMITSESetup, XhciDID,
GcSensorVarName, PCI_COMMON, SioSetupData, UsbSupport, NetworkStackVar,
SecureBootSetup, Setup). Exposed as MCP tool and inspect-uefi-nvram CLI command.
* fix(uefi): address review on checksums, compression, guided sections, NVRAM bounds
- FFS file checksum: verify the two's-complement invariant (payload sum +
stored byte == 0 mod 256) instead of comparing sums, and encode the correct
complement in the fixture builder.
- Compression sections (type 0x01): use the 9-byte header and classify EFI
standard compression instead of 'none', so extraction reports a gap rather
than publishing compressed bytes as a raw section.
- GUID-defined sections: derive GUID/data-offset/attributes from the parsed
common header size (compact or extended) and reject out-of-range payload
offsets.
- AMI NVRAM: bound recursive chains to the enclosing container's data end and
report partial coverage when a valid nested chain is cut by max_depth.
* fix(uefi): bound decode memory, serialize operations, enforce deadline, mark truncation
- LZMA worker: enforce max_output_bytes while decoding through a bounded output
sink, so an oversized stream is rejected during expansion instead of after a
full decompression plus a second Buffer copy.
- Provider: serialize admitted operations (the promised single decode-worker
lane must not become one worker per overlapping call) and apply one
whole-request deadline that covers every decode stage, not a fresh per-stream
timer. close() drains the queue and the resource scope.
- Scan: track truncated sections of known type and report coverage partial
instead of complete when a section declares more bytes than are present.
* fix(uefi): cancellable queue, timeout surfacing, availability and reader omissions
- Queue: check the caller signal before enqueue and when a job reaches the head,
and race the queued promise against abort so a cancelled wait returns
immediately instead of blocking behind the active request.
- Deadline: track the internal deadline and return AnalysisTimeoutError instead
of the AnalysisCancelledError that runOwnedCommand reports for any external
abort, preserving the real failure reason for CLI/MCP callers.
- CapabilityInventory: treat inspect_uefi_nvram like the other bundled rea-uefi
tools so discovery does not demand Unblob for it.
- UefiArtifactReader: report image truncation through onOmission so inventory
coverage reflects the unread suffix even when no volume was found.
* fix(uefi): limit early cancellation to unstarted jobs and preserve timeout cleanup
- #raceWithAbort only returns early for jobs that have not started; once a
request is running, await it so worker cleanup and completed output are
preserved instead of being discarded by a bare cancellation.
- Reclassify a deadline-induced cancellation as AnalysisTimeoutError while
keeping its cause and cleanup observations, and never override a different
primary failure.
* docs(licenses): record UEFI decoder dependency notices
* fix(uefi): preserve stream provenance and bound firmware analysis
* feat(uefi): decode LZMAF86 guided sections
* fix(uefi): validate publication before commit and order decoder cleanup
* fix(uefi): preserve unsupported volumes and extraction gaps
---------
Co-authored-by: morluto <76467478+morluto@users.noreply.github.com>
|
||
|
|
b44d949bfe | feat(kuna): verify release 1.1000 (#12107) | ||
|
|
5c59bdc8a6 |
feat(ghidra)!: verify the bridge on Ghidra 12.2 (#12081)
* feat(ghidra)!: verify the bridge on Ghidra 12.2 Admit 12.x from minor 2 upward, with 12.2 and JDK 25 as the verified pair. The bridge now calls the four-argument storage API added in 12.2, so 12.1.x cannot compile it and is no longer accepted. BREAKING CHANGE: Ghidra 12.1.x is rejected. Use Ghidra 12.2 or another 12.x build at or above minor 2, and a JDK inside that installation's declared range (25 or newer for the verified 12.2 build). * docs(ghidra): point remaining lanes at Ghidra 12.2 The Windows, 6502, and m68k prerequisites still named 12.1.4 and JDK 21, which the verified-build check now rejects. The bridge compile lane names the 12.2 jars it actually compiles against. Co-authored-by: morluto <morluto@users.noreply.github.com> * test(ghidra): admit the JDK the verified install declares The Java home framing probe still reported JDK 21 while the verified installation fixture now declares a minimum of 25, so doctor admission failed before the path framing was checked. Co-authored-by: morluto <morluto@users.noreply.github.com> * test(ghidra): derive admitted install fixtures from the verified release Boundary hosts and assertions still named Ghidra 12.1.4 after admission moved to 12.2, so list_procedures evidence and completed property reads disagreed with the install the provider actually reported. Co-authored-by: morluto <morluto@users.noreply.github.com> * fix(ghidra): record the exact 12.2 Clang switch-recovery defect Ghidra 12.2 stays the verified build. Sessions and decompiler results on that exact version name upstream issue 9996 and the 12.2.1 fix commit. Other version strings, including 12.2.1, do not carry the limitation. Co-authored-by: morluto <morluto@users.noreply.github.com> * test(ghidra): check switch-defect facts instead of the warning sentence The policy test keeps the structured defect record and checks that the owning formatter delivers its id, commit, release, and scope fields. Co-authored-by: morluto <morluto@users.noreply.github.com> * test(browser): name the Playwright launch boundary the lifecycle catalog checks Main retitled that case with a platform placeholder. The coverage catalog still required the old literal, so the merged full suite reported a missing title. Co-authored-by: morluto <morluto@users.noreply.github.com> * test(browser): point the lifecycle catalog at main's launch title The merged suite uses main's platform-specific Playwright launch test. The coverage catalog now names that title, and this branch keeps main's test body so the merge stays clean. Co-authored-by: morluto <morluto@users.noreply.github.com> * test(browser): cover the platform launch title on this branch The lifecycle catalog names main's platform launch title. This branch now has that quoted test too, so the check passes before and after the merge. Co-authored-by: morluto <morluto@users.noreply.github.com> * fix(ghidra): record the exact 12.2 masked byte-switch defect Ghidra 12.2 leaves an AArch64 and-0xff byte-offset switch unrecovered. Exact 12.2 sessions now cite open upstream issue 10154, and the AArch64 lane expects that jump table to stay unrecovered. Co-authored-by: morluto <morluto@users.noreply.github.com> * test(browser): keep one platform launch environment check The second launch test repeated the selected environment check. The remaining test is the parameterized title, and the launcher forwards SYSTEMROOT on win32 so that assertion holds. Co-authored-by: morluto <morluto@users.noreply.github.com> * fix(ghidra): keep the open switch defect on admitted builds The exact-version check cleared ghidra-10154 on every build except 12.2. That defect stays on admitted releases until one is known to fix it. ghidra-9996 still clears after the exact 12.2 build. Co-authored-by: morluto <morluto@users.noreply.github.com> * style(docs): format the Ghidra testing-lane table The AArch64 jump-table row wrapped past the formatter width and failed static checks. Co-authored-by: morluto <morluto@users.noreply.github.com> * test(ghidra): give the masked switch its full byte range The unrecovered oracle now uses 256 readable table bytes, and the same object must still recover its compare-bounded switch. Co-authored-by: morluto <morluto@users.noreply.github.com> * docs(website): point Ghidra setup at 12.2 and JDK 25 The public setup pages still told new users to install Ghidra 12.1.4 and JDK 21, which this release rejects. Changed setup sentences are extracted and left untranslated so those editions use the English page. Co-authored-by: morluto <morluto@users.noreply.github.com> * docs(website): keep catalog edits to the changed setup strings The catalog check compares active message ids, not a full rewrite. Restore the previous catalogs and update only the Ghidra 12.2 setup strings, leaving their translations empty. Co-authored-by: morluto <morluto@users.noreply.github.com> * fix(ghidra): apply the closed switch defect from the parsed patch 12.2, 12.2.0, and 12.2.0 with a suffix all precede 12.2.1, so they keep ghidra-9996. The masked-switch table lists all 256 byte entries. Co-authored-by: morluto <morluto@users.noreply.github.com> * fix(ghidra): share the AArch64 switch fixture compiler invocation --------- Co-authored-by: Cursor Agent <cursoragent@cursor.com> Co-authored-by: morluto <morluto@users.noreply.github.com> |
||
|
|
a67525cdf1 |
docs: organize canonical documentation layout and verify new pages (#2791)
* docs: organize canonical documentation layout (URGENTE) Group all existing authored guides by domain and ownership, expose complete navigation, and preserve their public routes. Update physical path consumers and release configuration while retaining historical records. Document domain-based specs and ADR slugs without global numbering. Co-Authored-By: Codex <noreply@openai.com> * fix(docs): honor home layout in all-page route verification * style: format reviewed source changes * fix(docs): preserve routes and navigation cache inputs * fix: repair the static-check failures on the default branch (#2895) * fix: repair the static-check failures on the default branch The default branch fails its own required `Static checks` job three ways, so every pull request reports that job as failed regardless of its own change. - `npm run format:check` reports `src/domain/functionComparison.test.ts` and `src/ida/IdaOperationRunner.ts`. - `npm run lint` reports a duplicate `import { join } from "node:path"` in `tests/boundary/mcp/ghidraInventoryMcp.test.ts` (lines 4 and 17). - `npm run typecheck` reports `format: "devin"` missing from the client format union in `src/application/SupportedClients.ts`, and an unchecked index in `tests/boundary/cli/clientProfileLifecycle.test.ts`, whose pair array is inferred as `string[][]`. Apply the pinned formatter, drop the duplicate import, list the `"devin"` format that its own definition already uses, and mark the pair array `as const`. Validation: `npm run check:fast` and `npm run format:check` pass. * fix(setup): keep Devin on the JSON configuration dialect --------- Co-authored-by: 吴佳浩 <wujiahao@supremind.com> Co-authored-by: morluto <76467478+morluto@users.noreply.github.com> * fix(docs): update links after guide relocation * docs: correct verified documentation route counts * fix(docs): update browser capture guide link after move (#2820) Refresh gettext protected-link comments alongside the authored href. Co-authored-by: Codex <noreply@openai.com> * fix(docs): include http3 lab in stable routes * fix(docs): preserve historical release evidence and links * fix(ghidra): restore Windows verifier identity import * docs(wakaru): preserve pinned upstream policy link * docs(index): retain recently added guide links * docs(mcp): preserve parent retention clarification * fix(cli): preserve standalone import guidance * fix(test): preserve translated guide link drift coverage --------- Co-authored-by: Matheus Breguêz <matbrgz@gmail.com> Co-authored-by: Codex <noreply@openai.com> Co-authored-by: morluto <17176810+morluto@users.noreply.github.com> Co-authored-by: 吴佳浩Alben <35291372+XiaoBinGan@users.noreply.github.com> Co-authored-by: 吴佳浩 <wujiahao@supremind.com> |
||
|
|
f8f9095d2d | feat(kuna): verify release 1.990 (#8813) | ||
|
|
75c3cab540 |
fix(kuna)!: separate verification policy from analysis identity (#8699)
* feat(kuna): verify release 1.989 * fix(kuna)!: separate verification policy from analysis identity * docs(kuna): show historical evidence recovery * test(kuna): cover verification warnings through MCP |
||
|
|
1d343a88e5 | feat(kuna): verify release 1.988 (#8509) | ||
|
|
b43c329df7 |
feat(artifacts): inventory and extract UF2 and DfuSe firmware containers (#8230)
* feat(artifacts): inventory and extract UF2 and DfuSe regions open_binary refused UF2 and DfuSe firmware containers as an unsupported format, so inspect_artifact and extract_artifact could not show which bytes a drag-and-drop or DFU update writes at which addresses. UF2 is recognized by a complete first block with all three magic numbers. Valid main-flash payloads are joined into address-contiguous regions per familyID, named family-0x<id>/0x<start>-0x<end>.bin, and known IDs are named from a small table copied from Microsoft's uf2families.json at a pinned commit. Numbering is counted per familyID and block count: absent, repeated, out-of-order and out-of-range block numbers are reported, and absent blocks leave coverage unknown. Not-main-flash blocks are excluded and reported; file-container blocks are reported and leave coverage unknown; invalid blocks and a partial final block are excluded with their position. A rewrite of one address with different bytes fails closed, naming both block spans. DfuSe is recognized only by its prefix together with a DFU 1.1a suffix. Each element becomes one region at its file range with its target's alternate setting and name. Structural faults fail closed with a byte offset; overlapping elements stay separate and are reported. A suffix CRC mismatch follows integrity_policy: fail refuses with a dfu-crc32 integrity error, and record-and-continue records a root contradiction that extraction also carries. HEX, UF2 and DfuSe share one retained-region reader and one run merger, so the HEX decoder and reader lose their private copies. * docs(artifacts): document UF2 and DfuSe images and their esptool lane Describe recognition, region names, metadata, numbering, failures, the DfuSe suffix CRC under integrity_policy, and limits, and link the page from the CLI and firmware guides and the agent skill reference. npm run verify:uf2 runs esptool merge-bin --format uf2 on generated inputs at known addresses, with and without MD5, with 256-byte payloads, and on a concatenation of two chips' outputs. Inspection and extraction through the built CLI must return every input at its address under the familyID esptool itself reports. * fix(artifacts): accept both DfuSe image size conventions UM0391 calls DFUImageSize the file length, and dfu-util's dfuse-pack.py writes that value, while ST's DfuFileMgr, MicroPython's dfu.py and pydfu leave the 16-byte suffix out. The decoder accepted only the second form, so it refused dfuse-pack.py output as malformed. Accept either value and keep the declared one in image_size; any other value still fails with the suffix offset and the file length. The tests pin both producers' output for one image, CRC included, from their build() functions transcribed and run under Python 3. * fix(artifacts): keep reused UF2 block numbers from hiding missing blocks esptool numbers every merged input from 0, so two inputs with the same block count share one numbering group. A block lost from one input left its number present in the other, and the file reported complete coverage. Each block number now records the target addresses it was seen at: equal address counts are complete copies, a resend to the same address is one block, and unequal counts make coverage unknown with a limitation and ambiguous_numbering_group_count. sequence_count becomes numbering_group_count, and region block positions become first_file_block and last_file_block. Review follow-ups in the same change: - compare_artifacts compares a DfuSe element's alternate setting and target name, so bytes moved to another device memory are changed; - the shared reader keeps no region bytes outside its map after close; - one domain type replaces four identical decoder failure types; - the UF2 decoder returns a typed limit instead of throwing on bytes beyond its admitted size, and caps retained regions, not runs; - DfuSe caps elements with bytes only, names empty elements and element-less targets, drops the constant bVersion and bcdDFU fields, and says whether the CRC matches when DFUImageSize fits neither convention; - classification evidence carries a suffix only when the probe saw the end, and root classification reads the tail only for a DfuSe prefix; - the UF2 domain region owns family_name, and the root records the family registry revision; the table's MIT notice is preserved; - docs pin the producer revisions (dfu-util ee6b393d and f9a537c9, MicroPython cb99ca98), give the MD5 structure's real meaning, and describe container contradictions in the MCP contract guide; - tests and the esptool lane add the equal-count inputs and a block lost from one of them, accepted boundaries beside each refusal, a DfuSe root larger than the classification prefix, and CLI refusals. * feat(artifacts): name the UF2 families that LibreTiny builds for LibreTiny writes UF2 for Realtek, Beken and Bouffalo Lab modules. The Microsoft registry revision REA already cites (cf3bd7f9) lists eight of those families: RTL8710A, RTL8710B, RTL8720C, RTL8720D, BK7231U, BK7231N, BK7251 and BL602. Their regions now carry those names. LN882H, which that revision omits, keeps its familyID with no name. * fix(artifacts): count DfuSe declarations without bytes instead of listing them Empty DfuSe elements have no entry, so DFUSE_MAX_ELEMENTS does not cap them, and the target walk kept a description string for each one. At 8 bytes per element, a file under the 128 MiB ceiling can declare about 16.7 million of them. The walk now counts every declaration without bytes and builds only the first NAMED_ELEMENTS descriptions, which is all that the limitation shows. The limitation text and empty_element_count do not change. The guide now says that both DfuSe limitations name the first four. On this host, decoding 4,000,000 empty elements (a 32 MB file) ran out of memory under a 128 MB V8 heap before this change, and it peaked at 1.59 GB RSS with the default heap. It now decodes in 114 ms with a 220 MB peak. --------- Co-authored-by: morluto <76467478+morluto@users.noreply.github.com> |
||
|
|
245a581818 |
feat(kuna): verify release 1.986 and guide version selection (#8187)
* feat(kuna): verify release 1.986 and guide version selection * test(kuna): cover verified release doctor guidance |
||
|
|
4ef916da03 |
feat(pe): inspect import and delay-load tables (#6509)
* feat(pe): inspect import and delay-load tables Add inspect_pe_imports / inspect-pe-imports to read PE32/PE32+ import and delay-load directories without executing the image. The report keeps DLL names, named and ordinal functions, ILT/IAT RVAs, and a pefile import hash of the standard import table. A missing directory is observed absence, not proof the image never imported APIs. * fix(pe): default PE import fixture options Allow peImportImage() without an argument so CLI and filesystem tests can use the KERNEL32 sample without repeating an empty options object. * test(pe): keep import path cases on the dedicated MCP contract inspect_pe_imports already rejects relative MCP paths in its own boundary test. Leave the shared absolute-path matrix to tools whose handler issue projection matches that suite's expected shape. * fix(native): index virtual-to-file mapping lookups mappedFileOffset scans every mapping twice per span, so a parser that translates one span per table entry costs sections x entries. Add fileMappingLookup, which builds an O(n log n) interval index once and answers each span in O(log n) with the same accept, reject and translation results. A differential test checks it against mappedFileOffset over randomized overlapping mappings and zero fills. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Ra7LM2NyQ7DumdssxbUq5g * fix(pe): report partial import evidence and exact pefile hashes - Withhold imphash with an explicit reason whenever the standard import table is partial (unreadable names or thunks, missing tables), or when pefile 2024.8.26 would hash a different row sequence: invalid or truncated names, ordinal 0, descriptors without functions, tables its bounds or repeat/spread heuristics discard, and its 8192-thunk import symbol cap. Delay-load issues do not withhold it. - Hash ordinal imports with pefile's complete ordlookup tables and its ord<decimal> fallback instead of declining unmapped ordinals. - Report a nonterminal descriptor whose FirstThunk is zero, and a delay-load descriptor whose IAT or INT RVA is zero, as malformed_entry partial coverage instead of a complete empty inventory. - Directory evidence lists the file spans actually consumed for the descriptor array and terminator; discontiguous mappings produce separate spans and separate Evidence ranges. - Carry exhausted limits as PeImportLimitFailure.limit and derive recovery from it; the fixed 16 MiB retained-text ceiling reports a fixed allowance instead of max_file_bytes advice. - Translate RVAs through the indexed mapping lookup and yield with a cancellation check every 1024 table entries. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Ra7LM2NyQ7DumdssxbUq5g * fix(pe): read only own ordinal tables for DLL names DLL names such as constructor and __proto__ pass pefile's name rule but resolved inherited object members, throwing before the ord<n> fallback. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Ra7LM2NyQ7DumdssxbUq5g * fix(native): preserve PE import facts and prove hash compatibility * test(native): verify PE import workflows and measured costs * refactor(native): narrow PE facts across the container union * docs(native): record integrated PE import validation * fix(native): bound every PE import RVA span * docs(native): measure RVA guard completed workflows * fix(pe): reconcile import coverage with retained rows * fix(pe): retain partial imports at descriptor mapping gaps --------- Co-authored-by: Matt Van Horn <455140+mvanhorn@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com> |
||
|
|
1252f17f0e | fix(ci): model bundled runtime entries and dispatcher fixtures | ||
|
|
0d849b1ae8 | docs: separate retained notices from provider version support | ||
|
|
c1fd496e6a |
feat(kuna): serve procedures, pseudocode and assembly from Kuna exports (#3854)
* feat(kuna): serve procedures, pseudocode and assembly from Kuna exports Register Kuna as a bring-your-own deep-analysis provider. It answers list_documents, list_procedures, search_procedures, procedure_address, address_name, procedure_pseudo_code, procedure_assembly and analyze_function (and batch_decompile through composition) from the verified project export. While a cold export builds in the background, pseudocode comes from a single-function `kuna decompile` run on a private copy and says so; assembly and data names wait for the export. Each answer records its source and file span in raw_result, limitations are scoped per operation, and the session-owned export is stopped on close unless another session still waits for it. The literal/regex procedure search predicate moves from the IDA runner into a shared domain helper. `npm run verify:kuna` adds a real-provider lane with an optional Ghidra comparison. Refs #1957 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(kuna): refuse a Ghidra comparison without caller-built targets Refs #1957 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(kuna): retry owned cleanup and keep answers bound to the opened Kuna - Re-verify the Kuna executable's digest before every launch (memoized by file identity), so no answer names one build while another produced it. - Keep the process supervisor of an unproven stop, and retry it on every later close in both the session and the cache; a failed close keeps failing until the stop is proven instead of reporting success. - Report an abandoned export's retained cleanup from session close. - Forget and rebuild an adopted export whose files another REA process evicted, instead of failing every later read. - Close a private copy whose setup failed, and retry failed removals. - Let the session own the shared quick inventory; each caller only stops waiting when it cancels. - Report a failed export as `failed` with its reason. - Lane: release the MCP client when open_binary rejects a target, and accept either valid source for the first answer. Refs #1957 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(kuna): drain session requests before releasing workspaces Combine caller cancellation with session shutdown and wait for active reads before releasing their process supervisors or private inputs. Retain unproven cleanup for later close attempts. Measure UTF-8 reply bytes without implying model token usage. Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com> Co-authored-by: Kaoru0822 <208281322+kaoru0822-kitauji@users.noreply.github.com> * perf(kuna): keep document metadata reads free of target analysis Listing the selected path no longer initializes the project cache or starts an export that the request never consumes. Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com> Co-authored-by: Kaoru0822 <208281322+kaoru0822-kitauji@users.noreply.github.com> * fix(kuna): reject verification matrices with missing functions Validate requested matrix coverage before building the fixture or opening providers. Empty matrices, unmatched names and partially matched function sets must fail instead of reporting an unperformed comparison as successful. Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com> Co-authored-by: Kaoru0822 <208281322+kaoru0822-kitauji@users.noreply.github.com> * fix(kuna): retain component provenance in function dossiers Record each source facet as one file span and preserve both pseudocode and assembly digests/ranges in combined reports. Keep direct text source fields compatible and verify every combined span through the real MCP lane. Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com> Co-authored-by: Kaoru0822 <208281322+kaoru0822-kitauji@users.noreply.github.com> * fix(kuna): keep retired file cleanup bound to its export Retain the export key with each failed file removal so a cancelled session reports and retries its own stopped resources. Preserve that association across sweeping and process-cleanup recovery without attributing unrelated cache failures to the session. Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com> Co-authored-by: Kaoru0822 <208281322+kaoru0822-kitauji@users.noreply.github.com> * docs(kuna): document the Kuna provider and list it in the catalog (#3855) * docs(kuna): document the Kuna provider and list it in the catalog Add the Kuna provider guide (configuration, answered tools, cold and warm paths, provenance, cache ownership, verification lane), link it from the README and its translations, the CLI, installation and index pages and the site navigation, describe `npm run verify:kuna` in the testing guide, credit Kuna in THIRD_PARTY_NOTICES, teach the agent skill when to select Kuna, and register its identity and operations in the generated product catalog. Refs #1957 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(kuna): state the Linux cache fallback, raw_result scope and comparison inputs Refs #1957 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(kuna): note that cache pins hold within one REA process Refs #1957 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(kuna): describe retired staging and retried cleanup Refs #1957 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> * fix(kuna): supervise regex and bind reads to one export Share a cancellable ECMAScript matching worker with Hopper while preserving its error contract. Bind C and assembly indexes to immutable project readers, retry whole dossiers after eviction, and enforce the existing buffered-text capacity before allocating cached spans. Document the verified Linux scope and keep complete exports accessible. Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com> Co-authored-by: Kaoru0822 <208281322+kaoru0822-kitauji@users.noreply.github.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: N0zoM1z0 <161784452+N0zoM1z0@users.noreply.github.com> Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com> |
||
|
|
a86deecac5 |
fix: align MCP archive contracts and documentation (#2478)
Reuse the domain ZIP format list for session schemas, verify full Harmony CLI/MCP lifecycles, and correct native view guidance and audited docs drift. Refresh locked dependency notices and gate inventory/provenance consistency, including notice inputs in the cached documentation gate. Fixes #2454 Co-authored-by: factory-droid[bot] <138933559+factory-droid[bot]@users.noreply.github.com> |
||
|
|
974f11d010 |
docs: clarify responsible use and preserve third-party notices (#2082)
Ship the responsible-use statement, third-party attribution records and preserved license texts in npm packages. Clarify historical-version and channel coverage without changing existing licenses or installation behavior. Assisted-by: Eiki (gensokyo-skills:eiki-rule-review) Assisted-by: Aya (gensokyo-skills:aya-source-investigation) |