Commit Graph
144 Commits
Author SHA1 Message Date
morluto aaf151f5d6 ci(limits): enforce numeric inventory drift on documentation changes (#12881)
* ci(limits): enforce numeric inventory drift on documentation changes

* fix(ci): invalidate cached lint when limits inventory changes
2026-11-20 16:33:27 +00:00
morluto c2c8ad3d70 test(evaluation): consolidate transcript and claim grounding checks (#12883)
* test(evaluation): isolate transcript routing and citation failures

* test(evaluation): require precise claim grounding failures
2026-11-20 11:29:08 -05:00
morluto 4449d13047 test(evaluation): consolidate report verdict and output checks (#12882) 2026-11-20 16:26:39 +00:00
morluto 75fe508eb4 fix(ci): select coverage guards for modified test registrations (#12860) 2026-11-20 15:20:32 +00:00
morluto c6fe1e43e8 test(package): consolidate verifier diagnostics and setup applicability (#12862)
* test(package): consolidate package overview diagnostics

* test(package): share automated setup applicability checks
2026-11-20 15:15:21 +00:00
morluto a1dec2d2d5 docs: remove tracked planning and architecture records (#12856) 2026-11-20 09:47:41 -05:00
morluto 21795b199d test(ci): consolidate project discovery and isolation checks (#12842) 2026-11-20 14:10:36 +00:00
morluto 9af55017cf test(guards): verify CLI prose exemptions independently (#12828) 2026-11-20 08:27:11 -05:00
morluto b9bcfa4041 test(ci): consolidate NativeAOT verifier restore and publish checks (#12815)
test(evaluation): consolidate NativeAOT retry verification
2026-11-20 12:56:09 +00:00
morluto b20f8576f2 test(ci): consolidate analysis efficiency comparator scenarios (#12804)
test(evaluation): consolidate recording comparison fixtures
2026-11-20 12:44:49 +00:00
morluto 21051b9d06 test(ci): make test selection and provider report refusals observable (#12782)
test(ci): verify selected shard and provider report refusals
2026-11-20 12:33:39 +00:00
morluto ec533c6e64 test(ci): consolidate project deadline policy checks (#12777) 2026-11-20 12:32:19 +00:00
385e5d228f test: own temporary directories through createTestTempDirectory in remaining tests/ (#12727)
* test: own temporary directories through createTestTempDirectory in remaining tests/

Give per-test directories in the remaining tests/ suites to
createTestTempDirectory so onTestFinished removes them through
removeTestWorkspace. Keep suite-scoped roots and child-process directories
whose removal is the assertion.

* test: drop empty cleanup callbacks and keep the capture skip reason visible

Remove the no-op withVerifierCleanup steps left after directory removal
moved to createTestTempDirectory. Put the native capture skip explanation
in the Linux sample test name, because it.skipIf only tests truthiness.

Co-authored-by: morluto <morluto@users.noreply.github.com>

---------

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: morluto <morluto@users.noreply.github.com>
2026-11-19 23:22:53 -05:00
dc2c31e76d test(limits): check documented limit defaults against code instead of per-file pins (#12720)
* test(limits): check documented limit defaults against code instead of per-file pins

The numeric-limit script now reads every default, floor, and maximum in
docs/design/rea-limit-inventory.md and compares it with ANALYSIS_SETTINGS
or the owner constant the parser enforces. A mismatch names the limit and
both values. Pins that only restated a covered value are removed.

Pwntools input bytes and the Kuna timeouts now use the shared exports, so
the registry value is the one the parser applies.

* fix(limits): reject a fractional documented limit cell

The cell parser treated a dot as the end of the integer, so 5000.5
compared equal to 5000. A documented number is now one complete integer,
with prose only after whitespace.

Co-authored-by: morluto <morluto@users.noreply.github.com>

---------

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: morluto <morluto@users.noreply.github.com>
2026-11-19 23:05:07 -05:00
morluto e1e24543e4 test: prove retained facts and remove preinstall source greps 2026-11-19 22:12:19 -05:00
morluto 6bb2ad90ac test: harden verifier assertions and prune duplicate checks 2026-11-19 22:09:03 -05:00
morluto f3734d90e7 test(ci): repair stale coverage expectations on main 2026-11-19 22:09:03 -05:00
morlutoandCursor Agent e21efd7664 fix(limits): drop never-landed limits from the numeric-limit verifier (#12669)
REQUIRED_RUNTIME_LIMITS still named three limits whose PRs never merged.
The checker skipped a required name absent from source, so the stale
entries passed. Remove them and fail that case with a typed result that
names the limit.

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
2026-11-20 01:50:02 +00:00
2206984be2 fix(ci): preserve all cases in selected test shards (#12425)
* fix(ci): keep test-name filters out of selected shards

* fix(ci): reject parsed name filters in selected test shards

* fix(ci): reject parsed tag filters in selected test shards

---------

Co-authored-by: ShuaixinHuang <ShuaixinHuang@users.noreply.github.com>
Co-authored-by: morluto <76467478+morluto@users.noreply.github.com>
2026-11-19 20:09:12 +00:00
e79e57552f fix(ci): require passing provider test files (#12424)
Co-authored-by: ShuaixinHuang <ShuaixinHuang@users.noreply.github.com>
Co-authored-by: morluto <76467478+morluto@users.noreply.github.com>
2026-11-19 20:04:50 +00:00
morluto 93f4c3749f fix(ci): select the managed pointer integration tests for row changes (#12486) 2026-11-19 19:31:54 +00:00
Mert Kayaandmorluto cad3209533 fix(javascript): attribute call-path unknowns only where the walk can reach Electron (#4915)
* test(javascript): cover the isolated-world probe outside Electron identity

* fix(javascript): expand Electron call paths only with an Electron reference

* test(javascript): cover Electron reach through resolved names, aliases and worker URLs

* fix(javascript): attribute call-path unknowns only where the walk can reach Electron

* test(javascript): cover a hoisted read that precedes a loader alias

* fix(javascript): keep call-path unknowns for late-initialized loader aliases

* test(javascript): drop a duplicate loader-alias case

* test(javascript): cover loader aliases reached through bindings and calls

* fix(javascript): prove a late initializer loader-free before dropping its unknown

* test(javascript): cover loaders behind default parameters, wrappers and long alias chains

* fix(javascript): resolve identifiers inside late initializers and bound the loader proof

* fix(javascript): bound late loader proofs and preserve input uncertainty

* fix(javascript): fail closed for receiver and mutated loaders

* fix(javascript): close loader-free proof gaps

* fix(javascript): retain uncertain loader sources

* test(javascript): cover remaining loader proof gaps

* fix(javascript): bound alias writes and preserve loader uncertainty

* test(javascript): cover demand-driven loader mutation facts

* perf(javascript): index loader mutation facts on demand

* style(javascript): apply oxfmt to the loader proof changes

* test(javascript): cover inherited loaders and rebound alias writes

* fix(javascript): preserve inherited loaders and rebound aliases

* test(evaluation): update scoped feature coverage oracle

* test(javascript): cover inherited loader proof gaps

* fix(javascript): preserve projected and inherited loaders

* fix(javascript): prove safe parameter member reads

* test(javascript): cover loader proof review gaps

* fix(javascript): close remaining loader proof gaps

* fix(javascript): preserve qualified global replacements

* fix(javascript): preserve spread rest uncertainty

* fix(javascript): retain retried handler uncertainty

* fix(javascript): retain import.meta loader uncertainty

* fix(javascript): detach fresh constructed aliases

* fix(javascript): check inherited members of ambient loaders

* test(javascript): parse call-path gate fixtures as established CommonJS

* fix(javascript): prove projected locals inside late initializers

A function-local binding was accepted by scope alone, so a destructuring
projection such as `const { r } = {}` inside a late initializer never met
the inherited-member check that a top-level projection goes through. Route
projected locals through the binding proof; locals with inline initializers
keep the scope shortcut, since the walk already visits their expressions.

* fix(javascript): keep late results with changed prototypes or import.meta uncertain

The loader-free proof inspected member expressions inside a late function
but not what its caller does with the result. With `Object.prototype.load =
require`, `var load = () => ({})` and `load().load("electron")` reach the
loader through a member selected after the call, and a bare `import.meta`
returned after `import.meta.load = ...` does the same. Check each result
expression: a literal fails when its prototype chain gained members, a bare
`import.meta` when any of its members changed, and a result of unknown shape
when either happened. Promise and generator results inherit from
Object.prototype as well. `SemanticPropertyPathCoverage.touches` answers
whether any retained write or escape sits below a prefix.

* fix(javascript): detach replacements held by fresh bindings

`alias = replacement` with `const replacement = {}` selected an identifier
initializer, so the later `alias.other = 1` stayed a shared write on the
original alias group and the resolver treated `base` as overwritten,
dropping its bridge call path. Resolve the identifier to its binding and
accept it when that binding only ever received one fresh allocation.
Bindings that can hold the original object keep the shared write.

* fix(javascript): charge loader proofs through the wrapper-visit budget

#11319 replaced the wrapper-visit counter with a Budget, so the loader proof charge no longer compiled on current main. Spend it through the shared helper, which records the same limit.

* test(javascript): keep the alias bound off the quadratic write index

The 8,000 by 8,000 alias bound spent its time in the ambient write index, which walks every store to an object for each member write. That cost is the same on main and is not what the bound covers. Reach the same 64 million alias and write pairs with 32,000 aliases and 2,000 writes, which runs in about 2.5 seconds instead of 8.5 on the same host.

Drop the 30 second overrides on both alias bounds too. They halved the hosted CI deadline the source project gives them, and the testing guide asks tests to leave deadlines to the project.

* refactor(javascript): ask the effect log for loader proof effects

Main now guards reads of the effect indexes outside javascriptSemanticEffectLog.ts. The loader proof read them directly in 15 places. Route those reads through the log: the existing ambientPathMayHaveChanged and bindingHasMemberWrites queries, plus three timeless queries for a path or any member below it, an ambient binding write, and an escape at a site other than the call being proved. The answers are unchanged.

* fix(javascript): retain uncertainty for changed ambient values

---------

Co-authored-by: morluto <76467478+morluto@users.noreply.github.com>
2026-11-19 05:37:00 +00:00
morluto 48e27e19b7 test: prune redundant and implementation-coupled coverage 2026-11-17 18:48:24 -05:00
morluto bc27535dfa chore(ci): retire completed Incur migration guards (#11894) 2026-11-17 18:26:46 -05:00
morluto 84ee604c6d perf(ci): optimize semantic graph construction, directory containment checks, gate checkouts, and boundary stragglers (#11851)
* perf(javascript): avoid redundant semantic graph validation and node hashing

* perf(resources): deduplicate directory containment checks and root lstat calls

* perf(ci): trace script fixture modules, sparse-checkout gate jobs, and parallelize built doc checks

* perf(tests): memoize live MCP doctor expectations and reuse CLI and verifier compilation

* fix(ci): enforce containment after skipped entries, validate interned contexts, and supervise doc and verifier teardowns

* fix(docs): decode buffered check output once to preserve multi-byte UTF-8
2026-11-17 14:57:30 -05:00
ShuaixinHuang 954979b7ff fix(contracts): keep recorded local-path schemas portable 2026-11-17 21:03:48 +08:00
morluto 116f159a8a fix: isolate concurrent doctor cleanup scopes, trace JS fixture helpers, and share MCP/home lifecycles
Address all four PR review findings structurally:
- Isolate concurrent Doctor probes and host subsystems in child
  ArtifactResourceScope instances tracked via resources.track() so a failed
  cleanup on one probe cannot deadlock or abort sibling reads before close().
- Include tests/ JS/TS helper modules and fixture path literals in
  throughHelpers() and named() so changes to JS fixtures such as
  fakeHopperReplies.mjs reach transitive helper and socket tests.
- Extract generic createSharedMcpSession() and reuse it in lazyLocalToolsMcp()
  to preserve retryable cleanup draining and startup-failure attribution.
- Replace test-scoped createTestTempDirectory() with a file-scoped workspace
  in jsonInputStatus.test.ts so the shared isolated home persists across tests.
2026-11-17 19:58:40 +08:00
morluto 8749adefe5 fix(ci): classify static/doc script inputs in change-plan and trace URL fixtures 2026-11-17 19:58:40 +08:00
morluto 30d5ad2a48 perf(ci): narrow PR test selection fallbacks, unify stray lanes, and cache Windows builds (#11797)
* fix(ci): narrow false full-suite fallbacks in PR test selection

* ci: unify Go and Android lanes under CI and scope CodeQL and cache retention

* perf(ci): trim classification checkout, cache MinGW/Windows builds, and rebalance full shards

* fix(ci): calibrate PR CI health window and CI timings schedule

* perf(ci): fix script-basename substring fallbacks and trim macOS/Windows lane overhead

* fix(ci): address PR review findings across CodeQL, Windows cache key, PR health, and docs

* perf(tests): share canonical MCP catalog setup and avoid Ajv $ref expansion

* fix(ci): align selected test shard limits (50 files, max 8 shards) with 400-file cap
2026-11-16 21:27:46 -05:00
morluto ec1cf3a9bd refactor(cli): render command help with REA's own help owner (#11683)
* refactor(cli): render command help with REA's own help owner

Add src/cli/help.ts and move the three incur Help.formatCommand callers
(rea mcp add, rea mcp doctor, rea mcp --http) onto it. Option spelling and
the unwrapped field type move to src/cli/optionFields.ts, which completion
now reads instead of its own copies. A counted incur-import guard records
the names still imported from incur so the list can only shrink.

Refs #11654

* refactor(cli): share option spelling across CLI owners and count every incur import

The argv parser, strict positionals, contract command projection and the
command registry now read the flag spelling, declared field type and count
marker from src/cli/optionFields.ts instead of their own copies. The
incur-import guard also counts namespace, default, star, side-effect and
dynamic imports, so `import * as Incur from "incur"` cannot bring a removed
owner back.

* refactor(cli): format and filter CLI output without incur (#11684)

* refactor(cli): format and filter CLI output without incur

formatCliOutput encodes TOON (@toon-format/toon), JSON, YAML and JSON Lines
itself instead of calling incur's Formatter; YAML still loads on first use.
src/cli/outputFilter.ts owns the --filter-output grammar and returns a
Result: an unclosed slice is a parse failure, so output validation reads
the parser instead of a second bracket scanner, and the parsed paths
travel with the output arguments to the result writer and JSON Lines.
@toon-format/toon moves from devDependencies to dependencies because REA
now imports it at runtime.

Refs #11654

* test(cli): pin output encodings and filter grammar with literal cases

Literal expected outputs for empty values, TOON scalars, objects and rows,
JSON-text re-indentation, nested BigInt values, JSON Lines rows and YAML,
and literal parsed paths and unclosed-slice refusals for --filter-output,
so a change to either owner fails without comparing against itself.
2026-11-16 12:01:04 +08:00
morluto b7fe131123 refactor(mcp): bind close_binary and reset_investigation through the shared table (#11647)
* refactor(mcp): bind close_binary and reset_investigation through the shared table

* refactor(mcp): bind provider operations through the shared table (#11649)

* refactor(mcp): bind provider operations through the shared table

* fix(mcp): bind a provider operation only to the contract of the same name

* refactor(mcp): bind objdump and Rizin commands through the shared table (#11653)

* refactor(mcp): bind objdump and Rizin commands through the shared table

* test(rizin): keep the pre-admission Rizin checks under the mutation sweep

* refactor(mcp): bind the desktop build tools through the shared table
2026-11-16 10:39:23 +08:00
morluto 07c5a54fee refactor(cli): import zod directly instead of through incur (#11655)
* refactor(cli): import zod directly instead of through incur

* fix(verify): count incur z imports from declarations, not comment or string text
2026-11-16 10:37:43 +08:00
morluto fbea9e8778 fix(verify): read a TypeScript non-null assertion as completing its operand (#11596)
* fix(verify): read a TypeScript non-null assertion as completing its operand

A postfix ! after a completed operand leaves it complete, so a following / divides instead of opening a regular expression that hid the rest of the expression from the guards.

* fix(verify): read export default as the start of an expression
2026-11-16 08:52:06 +08:00
morluto d6af08e4be test: name tests after the behavior they check, not a removed limit (#11618)
* test: name tests after the behavior they check, not a removed limit

Thirty-one test titles still said "beyond/above/after the former ..." for
limits that no longer exist. They now state what the test checks (the size,
count or depth it exercises, or the bound that still applies, such as
max_snapshot_bytes for the managed manifest snapshot). Test bodies are
unchanged.

Refs #10515

* test: say "more than" where a title counts only part of its fixture
2026-11-16 08:42:11 +08:00
morluto 332dea76a6 fix(native): keep unreported value-flow and archive coverage unknown, and exempt generation caps by reason marker (#11288)
* fix(native): keep unreported value-flow truncation and archive decode coverage unknown

* test(verify): count multiline optional-fact defaults and pin the guard's exclusions

* fix(domain): keep unknown counts and costs unknown in comparison and coverage summaries (#11325)

* fix(domain): keep unknown counts and costs unknown in comparison and coverage summaries

* refactor(verify): exempt legitimate optional-fact defaults with a reasoned marker (#11355)

* refactor(verify): exempt legitimate optional-fact defaults with a reasoned marker

The optional-fact-default guard counted request defaults and absence that
is modelled elsewhere as hidden unknowns. A comment
`// optional-fact-default: <reason>` on the default's line or the line
before now exempts it; the guard reads unstripped source for the marker and
ignores matches inside comment lines.

Marked: the two evidence paging offsets and four Swift literal reads whose
absence swiftLiteralCoverage reports. Removed instead of marked: jsdiff 9
types Change.count as required, so its two `?? 0` defaults were dead; the
evidence link traversal now carries retained records, so it no longer
re-looks them up behind `?? []`. Baseline 31 -> 22.

* fix(verify): blank comment spans instead of skipping comment-led lines in the optional-fact guard

Skipping a match whose line starts like a comment hid live code after a
leading block comment and counted defaults inside a block comment without
leading stars. The counter now blanks comment text (keeping offsets and line
breaks, skipping string literals) and matches the blanked code, while
exemption markers are still read from the original lines.

* refactor(domain): mark optional-fact defaults whose absence is not an observation (#11389)

* refactor(domain): mark optional-fact defaults whose absence is not an observation

Per-site review of the remaining optional-fact-default entries. Each marked
default is a caller option (trace ignore_fields, environment rules), a list
whose producer omits the empty case (unknown_size_frames, the schema's
min-1 representation_node_ids), caveat text whose completeness another field
carries (call diagnostics, unresolved calls, semantic resource limits), or
absence that already turns the result unknown (Wasm interface inventory,
WebMCP discovery, managed ExportedType rows, legacy integrity mismatch IDs).

Left counted: webCaptureDiff redirects (2; the CDP producer always records
them, so absence is a legacy record that should compare as unknown, not
as no redirects) and HopperCallerReconciliation (2; index-miss semantics not
yet verified). Baseline 22 -> 4.

* fix(browser): compare redirects as unknown when a capture predates redirect recording (#11402)

* fix(browser): compare redirects as unknown when a capture predates redirect recording

The CDP producer records every request's redirect chain, empty when there was none; a record without one predates redirect recording (#986). Comparing it against a current capture reported the network dimension as unchanged, treating the missing chain as "no redirects". Redirects are now compared only when both captures recorded them, and the network dimension is otherwise unknown with a reason; proven membership changes are still reported.

* refactor(hopper): interpret a caller-index miss once at the lookup (#11403)

The forward index holds observations from the examined procedures only, and relationship coverage stays unknown with the scan facts as its reason. A miss therefore adds no callers without showing there are none; the lookup now says so once instead of four optional reads defaulting at each site. The optional-fact-default baseline is now empty.

* docs(javascript): state why an omitted representation list adds no nodes

* fix(verify): count optional-fact defaults from parsed TypeScript, not comment-blanked text

The guard blanked comments with a hand-written scanner and matched a regular expression on the rest, so a default quoted in a string counted and a regular expression holding /* hid the code after it. It now walks the TypeScript syntax tree for property reads defaulted with ?? 0, ?? [] or ?? false, and reads exemption markers only from comment trivia.

* fix(verify): tokenize optional-fact defaults without a compiler and count chained defaults

* fix(verify): match whole optional-fact default expressions across calls and operators

* fix(verify): count optional-fact defaults in template substitutions and after postfix updates, and tie markers to their own expression

* refactor(verify): exempt generation and sample caps from the constant-maximum-slice guard by reason marker (#11454)

* refactor(verify): exempt generation and sample caps from the constant-maximum-slice guard by reason marker

* fix(verify): read reason markers only from real line comments

* fix(verify): read reason markers from the shared source tokenizer

* fix(verify): read a regular expression after a control head as a statement start

The shared tokenizer treated every closing parenthesis as the end of an operand,
so in `if (ready) /[/*]/.test(v)` it read `/[` as division and `/*` inside the
regex as a block comment, hiding the rest of the file from the marker-aware
guards. Parentheses are now tracked: the `)` closing an if/while/for/with head
allows a regular expression, while a call's `)` still means division.

* fix(verify): keep a keyword-named member call out of control-head detection

`policy.if(ready) / (…)` was read as an if-statement head, so the division was
taken for a regular expression and the denominator's optional-fact default was
not counted. A control keyword after `.` or `?.` is a member call.

* refactor(verify): exempt budget-arithmetic cursors and tallies by a not-an-allowance marker (#11493)

* refactor(verify): exempt budget-arithmetic cursors and tallies by a not-an-allowance marker

The budget-arithmetic guard cannot tell a scan cursor, an observed total, a
string being assembled or a tail buffer's retained length from an allowance
when each is compared with a limit. A field declaration marked
`// not-an-allowance: <reason>` (read through the shared reason-marker scan)
is no longer counted. The four remaining sites carry a marker, so the
baseline is empty and removed.

* refactor(verify): exempt detail levels, lifecycle states and domain vocabularies from the completeness-enum guard by reason marker (#11510)

A zod enum containing "complete" is counted as a local coverage vocabulary. Eleven
are not coverage: a caller-chosen detail level, how far a command or session
ran, and format states (GPU decode depth, WASM name section, SQLite column
details). They now carry `// detail-level:`, `// lifecycle-state:` or
`// domain-vocabulary:` with a reason, read through the shared reason-marker
scan (which gains an optional predicate for the matches a guard counts).
local-completeness-enum: 22 -> 11 on this branch.

* fix(verify): bind a not-an-allowance marker to its own class field

Exemptions were a file-wide set of names, so a marked tally in one class hid an
unmarked allowance with the same name in another, and a marked object property
could exempt a class field. Markers now exempt only a member declaration (at
class member depth) of the top-level class that contains it, and the named-
allowance count is taken per class so the same scoping applies to it.

* fix(artifacts): keep main's resources import in the Deno standalone reader after merging main

* fix(verify): start an expression after a template substitution and a non-member keyword, and accept any marker reason

The shared tokenizer read the `/` after `${` as division, so a regular
expression holding `/*` in a substitution hid the rest of the file from
every tokenizer-based guard, and it treated property names such as
`row.return` as keywords. Tokens now record whether template text opens a
substitution and whether a name is an expression keyword (not after `.` or
`?.`), and the regular-expression rule and the optional-fact-default operand
rule read those facts. The optional-fact-default guard reads markers through
reason-marker's isReasonMarker, so any non-empty reason exempts, as for the
other reason markers.

* fix(verify): blank comments with the shared tokenizer before matching architecture guards (#11573)

* fix(verify): blank comments with the shared tokenizer before matching architecture guards

The guards stripped comments with a regular expression that took a `/*`
inside a string, template or regular expression for a comment opener and
deleted code up to the next `*/`. src/flutter/FlutterBuildProvider.ts's
"lib/*/libapp.so" text hid four --pool-policy remediation strings from
cli-option-text-outside-cli. blankComments in source-tokens.mjs now owns
comment removal for the architecture guards and the reason-marker scan: it
blanks comment tokens in place (newlines kept) and keeps strings, templates
and regular expressions. The scan behind it retains only the last tokens it
reads, and whitespace runs are skipped at once.

The cli-option-text-outside-cli baseline records FlutterBuildProvider.ts at
its true count of 4; no other baseline changed.

Fixes #11477

* fix(verify): read a regular expression after a statement block and keep comment offsets for wide characters

The tokenizer now records whether each `{` opens a statement block or an
object literal (from the token before it) and marks the `}` that closes a
block, after which a statement, and so a regular expression, can start; an
object literal's `}` still ends an operand. blankComments replaces each run
of comment text with one space per UTF-16 unit, so a surrogate pair no longer
shifts later offsets.

* chore(verify): drop the Flutter CLI-text baseline entry now that main names no option there
2026-11-16 07:40:30 +08:00
morluto af0db09605 refactor(resources): move the directory artifact reader into src/resources (#11520) 2026-11-16 07:32:08 +08:00
morluto 2430b081c9 refactor(providers): bind provider refusals' per-call controls instead of naming CLI flags (#11455)
* refactor(native): bind producer_limits and max_input_bytes as the per-call controls of pwntools and Apple dispatch refusals

producerLimitControl in src/domain/producerResourceLimits.ts names one producer budget as producer_limits.<field>; the shared provider outcome classifier now carries a resource signal's limit. Pwntools file-size, CPU and output refusals and the Apple dispatch input refusal bind their control, and their remediation no longer names CLI flags.

* fix(native): report the selected output allowance as the omitted file_bytes default

* fix(native): bind producer_limits.diagnostic_bytes as the pwntools command output-limit control

* refactor(rust): bind producer_limits as the per-call control of Rust input and report refusals (#11458)

* refactor(rust): bind producer_limits as the per-call control of Rust input and report refusals

* test(rust): cover the complete-report refusal's producer_limits control

* refactor(browser): bind caller-selectable browser deadlines as per-call controls instead of naming CLI flags (#11466)

* refactor(rust): bind producer_limits as the per-call control of Rust input and report refusals

* test(rust): cover the complete-report refusal's producer_limits control

* refactor(browser): bind caller-selectable browser deadlines as per-call controls instead of naming CLI flags

deadlineParameterLimit in src/domain/analysisResourceLimits.ts owns the millisecond deadline control that nativeDeadlineRecovery and the browser recoveries share. CDP command and discovery, web bundle per-script and total, network capture and source-map decode deadlines now carry it; browserDeadlineIncrease no longer takes CLI flag text.

* fix(browser): record a per-script deadline's parameter control in partial web bundle results

* refactor(providers): bind Wabt, SQLite, EVMole, Apktool and Go controls instead of naming CLI commands (#11472)

* refactor(providers): bind Wabt, SQLite, EVMole and Apktool deadline and byte controls instead of naming CLI commands

These remediation strings named rea commands and flags through template text the cli-option guard did not count. Wabt byte refusals and output limits bind max_input_bytes, max_tool_bytes or max_output_bytes while a larger value is selectable; SQLite worker_timeout_ms, EVMole timeout_ms and Apktool decode_timeout_ms bind through deadlineParameterLimit; the shared provider outcome classifier now carries an output limit's control.

* refactor(go): bind Go analysis budgets as per-call controls instead of naming CLI flags

* fix(providers): keep the typed primary when Wabt, EVMole or pwntools command cleanup fails

* ci(guards): count template-built CLI option and command text outside the CLI layer (#11478)

* refactor(providers): bind Wabt, SQLite, EVMole and Apktool deadline and byte controls instead of naming CLI commands

These remediation strings named rea commands and flags through template text the cli-option guard did not count. Wabt byte refusals and output limits bind max_input_bytes, max_tool_bytes or max_output_bytes while a larger value is selectable; SQLite worker_timeout_ms, EVMole timeout_ms and Apktool decode_timeout_ms bind through deadlineParameterLimit; the shared provider outcome classifier now carries an output limit's control.

* refactor(go): bind Go analysis budgets as per-call controls instead of naming CLI flags

* fix(providers): keep the typed primary when Wabt, EVMole or pwntools command cleanup fails

* ci(guards): count template-built CLI option and command text outside the CLI layer

The cli-option-text-outside-cli pattern now also matches "(CLI ...", "on the CLI", "or use rea ..." and backticked `rea <command>` references, so remediation built from a template such as --${name} or rea inspect-... <path> is counted. Doctor.ts is exempt: setup and doctor run only through the CLI. The baseline records the newly counted pre-existing sites (22 -> 45 across 21 files).

* ci(guards): extract the CLI text matcher, exempt host-only commands with written reasons, and test each spelling

* ci(guards): exempt a host-only command and its own arguments in any matched CLI phrase

* fix(native): bind producer_limits.output_bytes for oversized pwndbg debugger replies through one owner

* fix(cli): name an Evidence target source failure's control by the source option that sets it

* feat(cli): render the flags of result-recorded controls in the full-output envelope (#11507)

* feat(cli): render the flags of result-recorded controls in the full-output envelope

* fix(cli): collect result controls only for a full-output envelope, in its requested format, past undefined values

* ci(guards): end a host-only command's arguments before the next CLI command

* refactor(reverse): record the output budget that stopped a one-shot command as a parameter control (#11528)

* fix(cli): read result controls only at positions the output schema declares as recorded controls

* refactor(providers): record the controls that bounded Rust compiler paths and kernel module text instead of naming CLI options (#11532)

* refactor(rust): record the control that bounded compiler-path coverage instead of naming CLI options

* refactor(native): record the controls that omitted kernel module .modinfo text instead of naming CLI options (#11534)

* fix(rust): describe compiler coverage from the retained result after report trimming

* refactor(providers): record managed representation and JavaScript semantic ceiling controls instead of naming CLI options (#11537)

* refactor(managed): record the representation budget on a resource-limit issue instead of naming its CLI option

* refactor(javascript): record the semantic retention ceilings that stopped a graph instead of naming CLI options (#11540)

* fix(cli): name a composed command's source options for the controls its result records

* fix(cli): read result controls from the delivered Evidence when a summary wraps it

* fix(rust): keep the report-byte control recorded when trimming omits every compiler path

When the complete-report allowance left room for no compiler path, rustc_commit became null and its coverage.limit was lost, so --full-output could not name the option that raises the allowance. The report now records rustc_commit_omission { reason, limit } outside the dropped record, and the summary view carries it.

* refactor(flutter): record the string-pool budgets that left a projection partial instead of naming the CLI option (#11541)

* refactor(flutter): record the string-pool budgets that left a projection partial instead of naming the CLI option

* test(flutter): assert the complete set of recorded string-pool budgets

* feat(cli): name the options of controls a failure's partial Evidence records (#11557)

meta.cli_controls was collected only from a successful result. A failure whose partial observation is Evidence of the command's own operation is now read the same way, at the positions the output schema declares as recorded controls; Evidence of another operation or a retained reference is not read. When --evidence_output publishes the partial, the delivery records it before replacing it.

* refactor(javascript): record the evaluator budgets that limited sources instead of naming the CLI option (#11564)

Per-value unknown reasons and the Electron wrapper limitation named --semantic-precision. The static examination now records the semantic_precision controls that limited a source (examination.controls), and analyze_javascript_application's semantic_graph.coverage.controls records every evaluator budget that limited any source (examination and semantic IR coverage), beside the retention ceilings. The CLI renders --semantic-precision from those records in meta.cli_controls; the reason texts name only the contract field.
2026-11-16 07:12:16 +08:00
morluto 1f24b3fa57 feat(evidence)!: name the Evidence subject by its target identity (format revision 2) (#11416)
* feat(evidence)!: name the Evidence subject by its target identity (format revision 2)

The Evidence subject carries subject.identity (kind, sha256, format,
architecture, selection) and the Evidence ID commits to it, so raw/DOL
entry points and ESP flash offsets of the same bytes are different
subjects. Every record declares evidence_format: 2; revision 1 bundles,
standalone records and snapshots are refused with the recreate guidance.
binaryTargetIdentity is the one projection of an open target, used by
Evidence and snapshot comparison.

BREAKING CHANGE: Evidence format revision 2. Evidence IDs commit to the
subject's target identity (subject.identity, including the raw/DOL entry
point or ESP flash offsets), and every record declares evidence_format: 2.
Evidence bundles, records and analysis snapshots from earlier releases are
refused; recreate the observations with this release.

* refactor(analysis-view): read parent subjects through the Evidence identity accessors (#11423)

Analysis views compare their parent's file identity (evidenceFileTarget)
and take path and digest from evidenceSubjectTarget instead of reading
the subject's digest, format and architecture members, which duplicate
subject.identity until they are removed. A counted guard
(evidence-subject-declaration-read) keeps new direct reads out and
records the 20 remaining files.

* fix(evidence): carry format refusals through Evidence readers and bind target selections

- safeParseEvidence/safeParseImmutableEvidence return the format refusal as
  an expected failure; every consumer maps it to the one integrity refusal
  with the recreate guidance. An unmarked object is an earlier record only
  when it has every member records have always carried.
- ArtifactProvider inventory roots and provider subjects that name the
  target's own bytes carry the target's selection (ESP flash offsets).
- Snapshot rows bind only Evidence whose identity, selection included,
  matches the snapshot target.
- Entry-point selections use the raw-binary entry point form.

* fix(evidence): refuse unauthenticated or earlier-format records instead of reading them as absent

- recognizeEvidence (evidenceValidation) replaces tryParseEvidence: input
  without an evidence_id is not Evidence (ok(undefined)); a record that names
  one but fails authentication or is from another format revision is an
  EvidenceIntegrityError carrying the recreate guidance, never undefined.
- Direct analysis retains that refusal as a secondary failure instead of
  silently skipping source capture; cleanup projection, source-closure
  annotation and the flutter, debugger and release-exposure recoveries use
  the same owner (the last three previously read the unauthenticated schema).
- A desktop capture.json from an earlier format is refused with the recreate
  guidance instead of "not desktop application capture Evidence".

* fix(evidence): advertise revision 2 ledger examples and rank delivery omissions by serialized size

- The obligation ledger and reconstruction coverage examples named
  evidence_format 1, which revision 2 refuses; they now use
  EVIDENCE_FORMAT_REVISION.
- MCP delivery chose which unretained recovery to omit by a parsed-storage
  lower bound clipped at the response budget. Once revision 2 subjects made
  the source record's estimate cross the budget, both candidates tied at the
  clip and the smaller source was omitted ahead of the larger completed
  observation. Candidates are now ranked by serialized size, which is what
  the budget counts.

* refactor(native): compare function snapshots by their Evidence target identity (#11450)

Function snapshots carry the subject's file target identity instead of the
duplicated subject declaration. Call paths and function comparisons compare
targets through sameTargetIdentity, so the same bytes opened at a different
raw entry point or ESP flash offset no longer count as one coordinate space:
build_call_path refuses the mix, and compare_functions no longer matches
entries by address across selections. Structural candidates and native
function matching read the architecture and digest through
evidenceFileTarget.

Refs #11417

* refactor(artifacts): compare artifact and WASM summaries by their Evidence target identity (#11461)

Artifact comparison authenticates a summary against its retained inventory
through sameTargetIdentity and rebinds the alias with the whole target,
selection included, so a flash-selected inventory summary taken under an
alias path is no longer refused. WASM comparison, the analysis view
artifact projection and the inventory root check read the digest, format
and display path through the Evidence identity accessors.

Refs #11417

* refactor(evidence): read record subjects through the identity accessors in JS, managed, ledger and bundle readers (#11470)

JavaScript application graphs, runtime reconciliation, managed inspection
and native verification sources, the record summary filter, the ledger's
residual-unknown target and bundle scope selection read the subject digest,
format and display path through evidenceFileTarget and
evidenceSubjectDisplay. No comparison changes: each reader matches one
record's facts against its own payload or a caller filter.

Refs #11417

* refactor(evidence)!: name the Evidence subject only by its target identity (#11497)

* refactor(evidence)!: name the Evidence subject only by its target identity

The subject keeps `identity` and the display facts `name` and `local_path`.
The duplicated `digest`, `format` and `architecture` members are removed; the
format-owned declaration now validates the identity itself. Readers the type
checker found move to the owner accessors; untyped reads in verify scripts,
the efficiency harness and test matchers move to `subject.identity`. The
`evidence-subject-declaration-read` text guard and its baseline are deleted.

Fixes #11473
Refs #11417

BREAKING CHANGE: the Evidence subject no longer has `digest`, `format` or
`architecture`; read `subject.identity.sha256`, `subject.identity.format` and
`subject.identity.architecture`. A record that still carries them is refused.

* test(evidence): give the Flutter verifier fixture the identity subject and check the DOL declaration without the ID

* test(evidence): drop the removed subject members from the declaration matrix and tamper fixtures

* feat(evidence)!: give every Evidence record an explicit subject identity (#11536)

* feat(evidence)!: give every Evidence record an explicit subject identity

A producer that cannot name a file passes an `unknown` target identity
with a closed reason (derived-from-linked-evidence, not-observed,
unsupported-subject) instead of no subject. The subject is non-null;
unknown subjects have no display facts. The generic missing-subject
limitation and `subjectUnavailableReason` are removed; producer-specific
explanations are ordinary limitations. Comparison identity requires the
derived unknown, and null-subject consumers ask the owner accessors.

Refs #11417

BREAKING CHANGE: every Evidence record has a subject. A record without a
file target names `subject.identity` `{ "kind": "unknown", "reason": … }`
with `name` and `local_path` null, instead of `subject: null` and the
limitation "Artifact identity is unavailable for this observation.".
Their Evidence IDs change.

* fix(evidence): name explicit unknown subjects in JavaScript callers and keep a managed graph's file subject

The verification scripts are not type-checked, so five createEvidence
callers still passed undefined (or a missing first target) after the subject
became required. They now pass unknownTarget("not-observed").

A managed application graph chose the first present input subject. Every
subject is now present, so an unknown artifact subject hid a file subject on
the member or boundary Evidence. The graph now takes the first input subject
that names a file.

* test(evidence): assert the subject kind instead of a presence the type now guarantees

Every Evidence record has a subject after this change, so test guards and
assertions that checked it for null always passed. Each now checks that the
fixture subject names a file, or is removed where a later fileIdentity,
fileSubjectTarget or fileSubjectDisplay call already requires that. Non-null
assertions on Evidence subjects are removed; analysis-view inputs, whose
subject is optional, keep an undefined check.

* test(evidence): expect the Evidence subject format under its identity

Two boundary tests still matched subject.format, which slice 2e moved into
subject.identity. toMatchObject is not type-checked against the Evidence
shape, so they failed only when run (the signature test on macOS).
2026-11-16 06:28:01 +08:00
morluto 5d3e1dc9cd refactor(mcp): bind analysis settings and session-derived comparison tools through the shared binding table (#11511)
* refactor(mcp): bind analysis settings tools through the shared binding table and count bespoke registrations

* refactor(mcp): bind inspect_analysis_view through the shared binding table (#11514)

* refactor(javascript): bind JavaScript source analysis in composition (#11467)

* refactor(mcp): bind inspect_analysis_view through the shared binding table

* ci(guards): count typed tool registrations and name each registration owner with its reason

* refactor(mcp): bind session-derived comparison tools through a derived binding kind on the shared table (#11547)
2026-11-16 06:18:49 +08:00
morluto 062b3835f9 ci: trace script modules and built-server consumers in PR test selection, and balance selected shards (#11516)
* ci: trace shared script modules to the tests that import them

A pull request that changed any scripts/lib module ran the complete
suite. Shared script modules now pass a change through to the tests,
verifiers and other shared modules that import them, like test helpers.
Another consumer (a build or test-runner script, root configuration,
package metadata, a hook or a workflow) that imports the module or names
it by file name still selects the complete suite.

The tracing core is exported as traceAffectedTests so a bounded local
gate can reuse it.

Fixes #11381

* ci: follow verifier source loads and named verifiers when tracing script modules

- Module URLs (new URL("./x.mts", import.meta.url), as loaded by
  importVerifierSource) are import edges.
- A test that names a verifier or shared module the change reaches is
  selected, not only one that names a changed path.
- A changed shared module that no test reaches runs the complete suite
  even when other changes select tests.

* ci: select tests that start the built server beside a changed presentation owner (#11519)

* ci: select tests that start the built server beside a changed presentation owner

A test that starts the built CLI or MCP server reaches server, contract,
entrypoint and CLI modules through the build, not an import, so a change
there selected none of them (#11146 failed on main this way). Such a
test is now selected when it, or a helper it imports, starts
scripts/rea.mjs or dist/, and it imports a module from the changed
owner's directory.

Fixes #11366

* ci: recognise only the repository's built entry points as runtime launchers

A package subpath such as ajv/dist/2020.js matched the dist/ pattern, so
in-process tests importing Ajv counted as built-runtime launchers.

* ci: balance selected test shards by recorded duration (#11522)

A selected PR run split its files across groups round-robin, so a few
slow files could land together. The plan now records the selected files
and a shard count (version 3), and each job runs one --shard of the
selection through the exact-test runner with the timing history main
already publishes, so the CI sequencer balances shards by per-file
duration (the median for files without a timing). Without history,
Vitest's own deterministic sharding applies.

Fixes #11382
2026-11-16 06:14:14 +08:00
morluto 1e663371a0 refactor(inspector): declare the V8 inspector's use of the browser Electron file scope (#11529) 2026-11-16 06:07:46 +08:00
morluto c475a6fac0 test(lifecycle): map every registered provider to its lifecycle regressions or explicit gaps (#11464)
* test(lifecycle): map every registered provider to its lifecycle regressions or explicit gaps

* test(lifecycle): track the web module and source-map processes and resolve test files against the repository URL

* test(lifecycle): record gaps where named tests did not exercise the claimed stage

* test(lifecycle): cover objdump cleanup and command-provider cleanup retry (#11487)

Close five provider lifecycle gaps: objdump cleanup and retry, sigrok and tshark process cleanup retry, and WABT retry (an existing literal-titled regression).
2026-11-16 05:18:36 +08:00
morluto b4a2a79c55 test(lifecycle): move local gate copies, tests/process-global and tests/boundary phase gates onto the shared harness (#11412)
* test(lifecycle): replace eight local gate helper copies with the shared harness

* test(lifecycle): count an arrival announced in the turn its operation settles

* test(lifecycle): move tests/process-global phase gates onto the shared harness (#11414)

* test(lifecycle): move tests/process-global phase gates onto the shared harness

* test(lifecycle): move tests/boundary filesystem and process phase gates onto the shared harness (#11418)

* test(lifecycle): move tests/boundary provider phase gates onto the shared harness

* test(lifecycle): move tests/boundary/mcp phase gates onto the shared harness (#11433)

* test(lifecycle): give each phaseGate hold its own promise so unhandled held rejections stay visible

* test(lifecycle): move tests/boundary browser, pcap and CLI worker phase gates onto the shared harness (#11437)

* test(lifecycle): move tests/boundary browser, pcap and CLI worker phase gates onto the shared harness

* test(lifecycle): move fixture-owned and arrival-only provider gates onto the shared harness (#11441)

* test(lifecycle): move src/server and provider phase gates onto the shared harness (#11447)

* test(lifecycle): move the remaining src server, Kuna copy, Frida and Ghidra phase gates onto the shared harness (#11471)
2026-11-16 04:49:19 +08:00
morluto cef87c498a refactor(architecture): add the ports and resources layers, move ports and shared resource owners there, and ratchet the layer baseline (#11208)
* test(architecture): fail on a stale layer baseline and document the declared layers

verify:module-boundaries reported a layer baseline entry whose imports were
gone but still passed, so main kept process -> artifacts at 20 after it fell
to 17 and a later change could add three imports back unnoticed. A stale
entry now fails like growth; --shrink-layer-baseline lowers it in the change
that removes the imports. The architecture map and CONTRIBUTING name
scripts/lib/module-layers.mjs as the per-directory layer declaration.

* test(architecture): refuse to lower the layer baseline after an inspection failure

A file that cannot be parsed contributes no imports, so a shrink run would record counts that fail as growth once the file is fixed. Whole-command tests cover stale rejection, shrinking, refused growth and the inspection failure.

* refactor(ports): move the progress, work-scope and inspection-scope ports to src/ports (#11214)

* refactor(ports): move the progress, work-scope and inspection-scope ports to src/ports

Pure move with git mv and import specifier updates.

* test(architecture): declare the ports layer and lower the layer baseline

src/ports sits between the foundation and the providers. Moving the three
ports removes 11 provider -> application imports.

* refactor(ports): move AnalysisProvider to src/ports (#11217)

* refactor(ports): move AnalysisProvider to src/ports

Pure move with git mv and import specifier updates in its importers, the
built-fixture path, the CI scope glob and the lint-rule test spellings.

* test(architecture): lower the layer baseline after moving AnalysisProvider

* refactor(ports): move the per-feature provider ports to src/ports (#11226)

* refactor(ports): move the per-feature provider ports to src/ports

Pure move with git mv and import specifier updates: the 47 *Port.ts and
*Ports.ts files that providers implement, plus OptionalObservationProviders,
which only composes the observation ports.

* test(architecture): lower the layer baseline after moving the feature ports

* refactor(providers): move closeAnalysisClient and the Frida session input errors to their owners (#11233)

* refactor(providers): move closeAnalysisClient to src/providers and the Frida session input errors to src/frida

Pure move with git mv and import specifier updates.

* test(architecture): drop the application-providers and application-frida cycles from the layer baseline

* fix(ci): keep provider lanes selecting the ports moved to src/ports

Each lane glob that matched a moved port under src/application gains its src/ports counterpart; the change-scope test pins one moved port per lane.

* refactor(domain): declare the localPath host exception and read HOST_PLATFORM there (#11256)

absoluteLocalPathStringSchema decides which paths are absolute on the running host, so it reads HOST_PLATFORM instead of process.platform. Domain may not import outside domain/contracts; module-layers now declares LAYER_EXCEPTIONS, exact file-to-file imports with a reason, and both the layer count and the pure-layer boundary skip only that import. Any other domain -> platform import still fails.

* refactor(ports): move the doctor check and provider inspection types to src/ports (#11246)

* refactor(ports): move the doctor check and provider inspection types to src/ports

Declaration move from application/Doctor.ts (unchanged text) and import updates; no re-export from Doctor.ts.

* test(architecture): lower the layer baseline after moving the doctor provider types

* refactor(ports): move the packet capture and signal recording ports to src/ports (#11249)

* refactor(ports): move the packet capture and signal recording ports to src/ports

Declaration move (unchanged text) out of the two application services, with import updates.

* test(architecture): lower the layer baseline after moving the capture and signal ports

* refactor(domain): move the analysis error projection schema from contracts to domain (#11251)

* refactor(domain): move the analysis error projection schema from contracts to domain

Declaration move (unchanged text) of the projection schemas that domain modules embed; contracts/errorSchemas.ts keeps the CLI envelope and the published JSON Schema. Import updates only.

* test(architecture): drop the contracts-domain cycle from the layer baseline

* refactor(ports): drop the imports the moved capture, signal and doctor types left behind

Also give the packet capture and signal recording lanes the new port paths, with change-scope cases.

* refactor(resources): add src/resources and move AnalysisCleanupLease and ArtifactReader there (#11259)

* refactor(resources): move AnalysisCleanupLease to src/resources

Pure move: git mv plus import specifier rewrites (source, tests, and the dist paths the verifier scripts load).

* refactor(resources): declare src/resources as a foundation unit

src/resources owns the shared analysis resource modules that process, windows and providers hold; AnalysisCleanupLease is the first. Its tests join the adapters project, the apk signature lane selects it beside src/artifacts, and the layer baseline drops the process and windows imports of the lease.

* test(ci): pin the apk signature lane on the moved cleanup lease

* refactor(resources): move ArtifactReader to src/resources

Pure move: git mv plus import specifier rewrites (source, tests, and the dist path a verifier script loads).

* test(architecture): lower the layer baseline after moving ArtifactReader

windows no longer imports src/artifacts; process -> artifacts 11 -> 9. The CI lanes that selected src/artifacts/ArtifactReader.ts select its new path, pinned in the change-scope test.

* refactor(resources): move ArtifactResourceScope to src/resources (#11265)

* refactor(artifacts): name the output tree and private root capabilities the resource scope releases

ArtifactResourceScope typed its output-tree and private-runtime-root owners with SafeOutputTree (src/artifacts) and PrivateRuntimeRoot (src/process). It only calls rollback() and close(), so it now declares those capabilities itself and names neither unit, which lets it move to src/resources without a resources <-> process cycle. The withheld-export test narrows to SafeOutputTree where it reads the published flag.

* refactor(resources): move ArtifactResourceScope to src/resources

Pure move: git mv plus import specifier rewrites (source, tests, the dist paths verifier scripts load, and the FIFO probe's module-relative URL).

* test(architecture): lower the layer baseline after moving ArtifactResourceScope

process -> artifacts 9 -> 5, and the artifacts <-> dotnet mutual pair is gone. The sqlite and agentenv lanes select the scope at its new path, pinned in the change-scope test.

* refactor(resources): move ArtifactFileOperation to src/resources (#11269)

* refactor(resources): move ArtifactFileOperation to src/resources

Pure move: git mv plus import specifier rewrites (source, tests, and the dist paths verifier scripts load).

* test(architecture): lower the layer baseline after moving ArtifactFileOperation

process -> artifacts 5 -> 1.

* refactor(resources): move readStableArtifact to src/resources (#11271)

* refactor(resources): move readStableArtifact to src/resources

Pure move: git mv plus import specifier rewrites.

* test(architecture): lower the layer baseline after moving readStableArtifact

process no longer imports src/artifacts: process -> artifacts 1 -> 0 and the artifacts <-> process mutual pair is gone. The seven lanes that selected readStableArtifact select its new path, pinned in the change-scope test; the architecture map lists what src/resources owns.

* refactor(hopper): take Linux launcher verification from composition through a port (#11278)

The Hopper launcher imported inspectLinuxHopperLauncher and retryLinuxHopperPublisherCleanup from src/application (the two hopper -> application imports). src/ports/LinuxHopperLauncherVerification.ts now names that capability; src/application/LinuxHopper.ts provides LINUX_HOPPER_LAUNCHER_VERIFICATION, binary composition passes it to HopperProvider, and the provider hands it to the launcher. A launcher built without one refuses a Linux demo launch with reason verification_unavailable before running the launcher. Layer baseline: hopper -> application 2 -> 0.

* refactor(config): move Hopper launcher discovery to a src/hopperPaths foundation unit (#11292)

* refactor(hopper): move the launcher discovery and macOS Hopper paths to src/hopperPaths

Pure move: git mv plus import specifier rewrites.

* refactor(hopper): declare src/hopperPaths as a foundation unit with the Linux launcher candidates

Hopper install paths and launcher discovery are pure path facts that the
Hopper provider, doctor and setup all read. Declare src/hopperPaths in the
foundation layer, add it to the adapters test project, the architecture
map and the package-baseline CI lane, and move the Linux launcher
candidates out of src/application/LinuxHopper.ts into
src/hopperPaths/LinuxHopperPaths.ts so discovery no longer imports
application code.

* refactor(config): leave Hopper launcher discovery to the Hopper provider

parseConfig resolved an unset HOPPER_LAUNCHER_PATH by probing the
filesystem through application-owned discovery, so config imported
application (config -> application 2, application <-> config cycle) and
read process.platform ambiently.

AppConfig.hopperLauncherPath is now the caller's HOPPER_LAUNCHER_PATH
unchanged (string | undefined). src/hopperPaths/HopperLauncherDiscovery.ts
owns the selection (selectedHopperLauncherPath: the configured spelling,
else discovery from the caller environment's home on the provider's
platform); HopperProvider and the two real-Hopper verifiers read it.
Discovery tests move from config.test.ts to src/hopperPaths; a provider
test covers discovery from the provider's own platform and home.

Module layers: config -> application 2 -> 0; application <-> config removed.
Architecture guards: ambient platform reads in parseConfig.ts 2 -> 0.

* refactor(providers): move owned-process prerequisite availability out of application (#11294)

* refactor(providers): move the owned-process prerequisite availability mapping to src/providers

Pure move: git mv plus import specifier rewrites.

* test(architecture): lower the layer baseline after moving owned-process availability

android -> application 1 -> 0; apktool -> application 1 -> 0.

* refactor(process): move the regular-file read owner out of application (#11299)

* refactor(process): move the regular-file read owner from src/application to src/process

Pure move: git mv plus import specifier rewrites.

* test(architecture): lower the layer baseline after moving the regular-file read owner

desktop -> application 5 -> 4; dotnet -> application 2 -> 1.

The agentenv lane listed src/application/RegularFileRead.ts. At its new
path it is a src/process/ shared boundary: fast qualification selects the
code and runtime checks (and the single owning lane, web_source_map, via
src/process/**), and full qualification selects every lane, as for every
other src/process/ module. A second owner entry would only suppress the
web_source_map selection, so the agentenv entry is removed, not renamed.

* refactor(resources): give atomic text writes their own owner (#11302)

* refactor(resources): give atomic text writes their own owner in src/resources

src/application/JsonFiles.ts owned both JSON input reads and the atomic
text write (writeTextFile / writeTextParts and their staged-output
publication). The write side depends only on domain, filesystem and
resource owners, but il2cpp's Ghidra seed writer had to import
application to reach it (il2cpp -> application).

Move the write side verbatim to src/resources/TextFileWrite.ts
(TextWriteCancellation, writeTextFile, writeTextParts and their private
staging, publication and failure classification helpers). JsonFiles keeps
the JSON read owner and reads the shared errno-to-reason classifier
(fileAccessFailureReason) from the write owner instead of a copy.
Importers (il2cpp seed writer, evidence bundle files, desktop build
solves, analysis snapshot files and four boundary tests) read the new
path; no re-export is left in JsonFiles.

* test(architecture): lower the layer baseline after moving the text write owner

il2cpp -> application 1 -> 0.

* refactor(ports): move the desktop build host contract to src/ports (#11303)

* refactor(domain): move the setup cancellation check from src/application to src/domain

Pure move: git mv plus import specifier rewrites.

* refactor(ports): move the desktop build host contract to src/ports

The desktop provider implements doctor's desktop build facts reader and
setup's desktop build host, but the contract it implements lived in
application (DesktopBuildDoctor, SetupDesktopBuild, Doctor's
clientRegistrations signature, ClientRegistrationEnvironment's setting
types), so desktop imported application four times and the two units
were a recorded mutual pair.

src/ports/DesktopBuildHost.ts now holds that contract, moved verbatim:
DesktopBuildCommand, DesktopBuildFacts, DesktopBuildFactsInput,
DesktopBuildSetupFacts, DesktopBuildSetupHost, RecordedProviderSettings
and OwnedProviderSetting. Two names are new: DesktopBuildRegistration,
the registration facts the host reads (client, command and the
recorded-settings names; client registration status satisfies it), and
DesktopBuildRegistrationReader, which replaces
DoctorHost["clientRegistrations"] in the setup host. The facts input's
registration reader returns DesktopBuildRegistration instead of the full
application status; the setup facts' settings are spelled
Readonly<Record<string, string>> (SetupProviderEnvironment's definition).
Application imports the types from the port; no re-export is left.

* test(architecture): lower the layer baseline after the desktop build host port

desktop -> application 4 -> 0; the application <-> desktop mutual pair is gone.

* refactor(domain): define the resolved app bundle resource root beside its schema (#11304)

* refactor(domain): define the resolved app bundle resource root beside its provenance schema

ResolvedAppBundleResourceRoot (an app directory's resource-only identity)
is a pure type over BundleResourceRoot's layout, but it lived in
src/application/AppBundleExecutable.ts, so the native and artifact
providers that receive it imported application.

Move the interface verbatim to src/domain/apple/bundleResourceRoot.ts,
which owns BundleResourceRoot, and point its eight readers there (native
macOS provider and plist source, artifact provider, binary composition,
and the binary session, status, port and bundle-resource session). The
resolver that produces it stays in application.

* test(architecture): lower the layer baseline after moving the resource root type

native -> application 2 -> 0; artifacts -> application 2 -> 1 (the
artifact provider still constructs BundleResourceSession).

* refactor(config): move the pwntools input bound parser to src/config (#11306)

* refactor(config): move the pwntools input bound parser from src/native to src/config

Pure move: git mv plus import specifier rewrites, and the module path in docs/design/rea-limit-inventory.md (table realigned by oxfmt).

* test(architecture): lower the layer baseline after moving the pwntools input bound

config -> native 1 -> 0. The binary_layout and recorded_crash lanes, which
select src/native/pwntools/**, also select src/config/pwntoolsInputLimit*.ts;
ciChangeScope.test.ts pins both.

* refactor(filesystem): move REA cache directory helpers out of config (#11309)

* refactor(filesystem): move the REA cache directory and lexical directory helpers from src/config to src/filesystem

Pure move: git mv plus import specifier rewrites.

* test(architecture): drop the config and filesystem cycle from the layer baseline

config no longer imports filesystem; filesystem still reads the Windows
ChangeTime settle budget from config.

* refactor(windows): break the process and windows import cycle (#11317)

* refactor(domain): move the runtime-control and private-runtime-root refusals from src/process to src/domain

Pure move: git mv plus import specifier rewrites (including the dist path scripts/verify-windows-native.mjs loads).

* refactor(windows): type Job Object cleanup by what a Windows job reports

WindowsOwnedProcess.cleanup() returned process-ownership's
ProcessCleanupResult, so src/windows imported src/process for a type while
process imports windows to supervise Windows trees. A Job Object stop only
ever reports settled-and-signalled or a reason it did not settle; name that
subset WindowsJobCleanupResult in windows. It stays assignable to
ProcessCleanupResult, so the process supervisor reads it unchanged.

* test(architecture): drop the process and windows cycle from the layer baseline

* test(architecture): ratchet cross-provider imports and imports past a provider entry (#11386)

* test(architecture): ratchet cross-provider imports and imports past a provider entry

A provider folder may import the domain, contracts, foundation and ports layers, the shared provider core (src/providers) and its own files; an import of another provider folder is a recorded exception. Application, composition and the CLI/MCP adapters reach a provider only through src/<provider>/index.ts. verify:module-boundaries counts both kinds of import per unit pair in the layer baseline (crossProvider, providerEntry); like the upward counts they may only shrink, and a pair missing from the baseline fails.

* refactor(resources): move StableArtifactFailure and StableArtifactObservation into src/resources (#11387)

* refactor(resources): move StableArtifactFailure and StableArtifactObservation into src/resources

Providers project stable-read failures through StableArtifactFailure next to the other shared provider toolkit owners (ArtifactReader, ArtifactResourceScope, ArtifactFileOperation, AnalysisCleanupLease, readStableArtifact) that already live in src/resources. Under src/artifacts it made every provider that reads a stable artifact import the artifacts provider. Pure move: git mv plus import specifier and baseline updates; the layer baseline drops the provider-boundary counts the move removes.

* refactor(resources): reach the shared provider toolkit through src/resources/index.ts (#11390)

* refactor(resources): import the shared provider toolkit through src/resources/index.ts

Adds src/resources/index.ts, which exports the toolkit names that production code outside src/resources uses, and rewrites those importers (420 files) to import from it, merging each importer's toolkit imports into one declaration. Mechanical: import declarations only.

* test(architecture): reach src/resources only through its entry file

verify:module-boundaries now counts any production import of a src/resources file other than src/resources/index.ts, from any unit, with the imports past a provider entry. The count is renamed from providerEntry to entry ("import past the entry file"); it may only shrink, and src/resources starts at zero.

* test(architecture): cover provider boundary counts through the verifier command

* refactor(resources): move the safe output tree and artifact path owners into src/resources (#11398)

* refactor(resources): move the safe output tree and artifact path owners into src/resources

SafeOutputTree (with its admission, creation failure, readback, cleanup and identity files), StreamBytes, ArtifactPaths and readArtifactFileChunks depend only on domain, filesystem, platform and the toolkit, and browser, firmware, ghidra, javascript, android and apktool use them to publish outputs. Under src/artifacts every such provider imported the artifacts provider. Pure move: git mv, importers moved onto src/resources/index.ts (names added to the entry), the moved files import toolkit modules directly, path keys in the CI scopes and guard baseline follow the move, and the layer baseline drops the removed imports.

* test(architecture): give the shared provider core its own layer below the providers (#11401)

src/providers (deferred client owners and failure attribution) now imports only domain, ports, process, filesystem and the resources toolkit. Declaring it as the providerCore layer, between ports and providers, makes any import from it into a provider folder an upward import that verify:module-boundaries rejects, and lets every unit in the providers layer be a provider folder.

* test(architecture): declare each provider's entry files instead of a provider barrel (#11407)

* chore: ignore the source map parser move (#11348) in blame

* test(architecture): declare inspector's use of the browser CDP client as a provider dependency (#11420)
2026-11-16 03:56:10 +08:00
morluto ff6d1d8142 ci: run only the affected portable tests on pull requests (#11346)
* ci: run only the affected portable tests on pull requests

Pull-request CI now runs static checks, the build and the portable tests a change affects, selected from test imports (through test-only helpers), same-stem and directory-scanning tests, leaf-owner boundary tests and tests that name a changed path. Shared boundaries, untraced inputs, empty selections and selections above 150 files fall back to the complete fast suite. Main pushes, schedules, releases and ci:full keep the complete suite. The portable report verifies the exact selected inventory and the CI required gate accepts a selected plan only for a fast pull request with code changes.

* ci: own leaf-adapter tests by name and keep subset summaries diagnostic
2026-11-16 03:37:15 +08:00
morluto 28332d43ca refactor(javascript): charge the worker's retained result bytes through an over-committing Budget (#11399)
* refactor(javascript): charge the worker's retained result bytes through an over-committing Budget

Static checkpoints may retain past the result budget up to the static capacity, and the worker reports that exhaustion itself. Budget.chargeOverCommitting records the excess (overCommitted) and reports no remainder until refunds bring use back under the maximum. The budget-arithmetic baseline is now empty.

* refactor(domain): charge hand-written allowances through Budget and count limit-checked fields (#11405)

* refactor(domain): charge hand-written allowances through Budget and count limit-checked fields

Pyc report and key-walk tallies, reverse-engineering capture admission, Playwright trace fact retention and semantic alias selections now charge a Budget. The budget-arithmetic guard also counts a field outside Budget classes that is adjusted by hand and compared with a limit-named value; the eleven remaining sites are a counted baseline.

* fix(verify): scope limit-checked fields to their class and match limit names in any case
2026-11-16 03:34:31 +08:00
morluto 64c119df47 refactor(domain): charge remaining fixed allowances through Budget (#11319)
* refactor(domain): charge the Interface Builder, NativeAOT, managed and runtime budgets through Budget

* test(browser): show a refused runtime retention charge leaves the room intact

* refactor(domain): charge the remaining fixed allowances through Budget (#11383)

* refactor(domain): charge CUDA metadata and SQLite reply budgets through Budget

CudaMetadataBudget (visits, section reads, temporary index) and the SQLite
OutputBudget kept hand-written allowances whose field names escaped the
budget-arithmetic guard; the SQLite reply budget also charged each part
before checking it. Both now charge Budget, which refuses an oversized
charge without changing the remainder.

The guard now also counts, inside any hand-written ...Budget class, a field
that is adjusted by hand and compared with < or >, whatever its name.
Unchecked tallies (a yield counter, a reservation ledger) stay uncounted.
Firmware arena cursors are write offsets, not allowances: they are renamed
#arenaWriteOffset and leave the guard's scope. Baseline 17 -> 15.

* refactor(domain): move cache, re-priced, checkpointed and ledger retention onto Budget

Budget gains chargeEvicting (evict the oldest cache entries until a charge
fits) and restore (refund everything charged since a used mark, never
re-charging). With them:

- the Bun metadata range cache evicts through chargeEvicting and charges
  physical reads through a second Budget;
- Playwright scenario events refund an event's old cost and try-charge its
  re-priced cost, and admission charges with tryCharge;
- WebNetworkProjectionAccumulator keeps one shared allowance plus retained
  and temporary shares whose checkpoints restore by refunding;
- EvidenceLedger commits its admitted delta (charge, or refund when a
  replacement shrinks) and clears with restore(0);
- the web bundle worker charges an admitted result, and on the completed-
  snapshot path retains facts only when they still fit;
- the Pyc nested code walk charges steps and retained references.

budget-arithmetic 15 -> 4 (JavaScriptAnalysisWorker only).

* build(verify): declare the budget-arithmetic guard's counter for typed tests
2026-11-16 03:08:28 +08:00
morluto 15dc40e2bf test(lifecycle): let phase gates release with a value or a rejection (#11367)
* test(lifecycle): let phase gates release with a value or a rejection

phaseGate<T, R> now hands R back from hold, and reject(error) makes hold
throw, so gates around a late module load or a descriptor read that
completes or fails after cancellation fit the shared harness. Migrates the
src/application gates (AnalysisProviderRegistry x5, LazyAnalysisProvider,
BinarySessionLiveness, CapabilityScope, McpClientRegistration) and
fileHandleChunks, which exercises reject.

* test(lifecycle): cover an early phase-gate rejection and first-decision release

* test(lifecycle): move src/artifacts and src/process phase gates onto the harness (#11371)

Bun, Deno, FIT, NTFS and Mach-O slice reader gates, and the artifact
resources, owned worker, owned lease and launcher grace gates now use
phaseGate. The lipo capture and launcher grace gates release with their
command result and exit verdict. Arrival-only acknowledgements (ESP and HEX
decoder writes, process cleanup start) and the abort-aware process listing
fake stay as they are.
2026-11-16 03:05:55 +08:00
morluto e09bbcaf5f refactor: report NativeAOT, Interface Builder and owned-MCP output limits through the shared limit owners (#11194)
* refactor: report NativeAOT, Interface Builder and owned-MCP output limits through the shared limit owners

* refactor(errors): carry a parser's required value on its limit reference and in adjustable-budget refusals (#11201)

* fix(android): keep the JADX output-limit refusal's retained process output

* refactor(native): name PE and native-export allowances in the BinaryResourceFailure limit (#11253)

PeImportLimitFailure, PeLoadConfigLimitFailure and NativeExportLimitFailure kept a parallel `limit` field beside the LimitRef their BinaryResourceFailure base already carries (named only "structure"). The allowance name now lives in the LimitRef, consumers read it with binaryResourceAllowance against the parser's exported allowance list, and the three subclasses are removed. The local-limit-error-class guard also counts limit subclasses of BinaryResourceFailure.
2026-11-16 00:02:47 +08:00
morluto 7aea9843bc refactor(mcp): register service-backed tools through one contract binding loop (#11264)
* refactor(mcp): register service-backed tools through one contract binding loop

registerContractTools registers every bound contract from the registry through the shared Evidence or retained-summary handler its binding selects, and refuses a binding that names no registered contract. createServer declares the bindings by exact contract name; 41 per-tool register files are deleted.

* refactor(mcp): bind service-backed tools from one shared table and make each binding select one handler

serviceToolBindings owns the binding of every service-backed contract, keyed by its service; createServer and the MCP tests bind from it, so tests exercise the production handler kind, admission and dependencies. A binding can no longer carry both run and summary. The Go real-binary workflow follows the new registration owners.

* test(mcp): assert binding exclusivity with type-level checks that hold under every checker
2026-11-15 23:55:31 +08:00