* fix(snapshot): bind replay to validated cache entry
* fix(snapshot): persist composed workflow results
* fix(snapshot): enforce workflow replay identity
* fix(snapshot): honor cancellation after route resolution
* test(snapshot): make cancellation race deterministic
* fix(snapshot): replay all composed workflow evidence
* fix(snapshot): index workflow evidence once per snapshot
Validate workflow entries against a query and content index instead of scanning the evidence bundle for every entry.
* fix(snapshot): reuse previewed routes and bound workflow cache
---------
Co-authored-by: Cursor Agent <cursoragent@cursor.com>
* fix(javascript): bound semantic node projection for resource safety
analyze_javascript_application exhausted the heap or failed serialization on
ordinary inputs. A small extracted tree crashed outright, and a larger
application tree failed at both the default heap and an 8 GB heap.
Cause: the semantic projection emits one node per AST expression, call site,
binding and property slot, with no ceiling. A five-file tree already yields on
the order of 170,000 nodes, and the whole result is serialized after the object
graph is built and validated. Result ceilings were deliberately removed upstream,
so nothing bounded this growth.
Apply two resource-safety ceilings and report them through the graph's own
coverage contract rather than dropping data silently:
- SEMANTIC_GRAPH_NODE_CEILING bounds retained nodes per tree (100,000, roughly
300 MB serialized, below V8's 512 MB string limit).
- SEMANTIC_GRAPH_FILE_NODE_CEILING bounds each source file (20,000) so one
bundled library cannot starve the application's own modules.
Exhausting either marks coverage truncated with a partial status and records the
ceiling in coverage.limits. A small application stays complete and untruncated.
Verified: a previously-crashing application tree now returns Evidence in under a
minute, while a small tree stays complete. Existing tests and check:fast pass.
* fix(javascript): report semantic graph truncation accurately
---------
Co-authored-by: REA Contributor <contributor@users.noreply.github.com>
Co-authored-by: morluto <76467478+morluto@users.noreply.github.com>
* perf(setup): reuse initial diagnostics during planning
* test(setup): verify post-configuration doctor refresh
* style(setup): remove extra test spacing
* fix(artifacts): accept the bundle subject when extracting an app bundle
For a .app target the session target is the bundle's executable, while the
artifact provider reports the bundle itself as the subject. The subject
check exempted inventory_artifact and inspect_artifact but not
extract_artifact, so extracting any .app failed with execution_failure after
the output tree had already been written, and the output path was never
reported.
* refactor(binary): rename artifact bundle subject helper
isArtifactInventorySubject also covers extract_artifact for .app
bundles, so name it for the shared bundle-subject exemption.
---------
Co-authored-by: Cursor Agent <cursoragent@cursor.com>
* fix(javascript): resolve bare source-map and worker URLs next to the script
A sourceMappingURL like `main.js.map` (the default of webpack, esbuild,
rollup, Vite and rolldown) and `new Worker("worker.js")` were resolved as
module specifiers, so the bare name was looked up as an npm package and the
map or worker script was never linked. Resolve them as URLs relative to the
declaring script.
* fix(javascript): tighten url-reference resolution edge cases
Use looksExternal for non-module contexts so protocol-relative URLs
cannot be misread as root-absolute paths, cover url-reference unit
cases, and assert bare service-worker script resolution.
---------
Co-authored-by: Cursor Agent <cursoragent@cursor.com>
project_apple_application_graph accepted only IPA inventories. It now
also projects macOS .app directories and ZIP or DMG inventories that
contain applications. It reports application roots, platforms, and
every nested bundle with its path-convention role, layout, parent,
Info.plist path, executable candidates, and signing paths:
- roles: app extensions, XPC services (including inside frameworks),
frameworks, login items, system and driver extensions, plug-ins,
resource bundles, and helper or nested applications;
- privileged helpers in Contents/Library/LaunchServices and launchd
plists in Contents/Library/LaunchAgents or LaunchDaemons;
- direct files of Contents/Helpers;
- symlinks by path. Their targets are not inventoried, so versioned
frameworks are described through their real Versions/<version>/
directories.
AppleDouble sidecars (._* and __MACOSX/) are excluded from roles. A DMG
whose contents could not be inventoried is reported as partial. Other
inventory formats remain input errors. The projection still reads no
plist or CMS semantics; it points callers at inspect_plist.
The result schema is additive. projection_id now covers the new fields,
so IPA projection IDs differ from earlier versions.
verify:macos-bundle compiles a source-owned app with clang (CLT only).
It packs it as a directory, a ditto ZIP, and an APFS DMG, and checks
identical anatomy through the CLI with stdio MCP parity. It runs in the
macOS CI job.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(artifacts): project compiled AppKit actions from the control to its target
NSNibControlConnector archives the sending control as NSSource and the
action target as NSDestination; a nil target is the first responder. The
NIBArchive projection swapped them for control connectors, so every
compiled AppKit action ran from its target to the control. The action
trace, which follows control -> action, could not find them, and the
selector node was keyed by the control instead of the target class. When
the target was nil, the swapped source was null and the action was
dropped: Chess lost 29 menu actions, KeepingYouAwake 7.
Connectors now keep NSSource -> NSDestination. The NIBArchive test
encoder moves to a fixture module so a bundle test can build compiled
NIBs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(artifacts): report observed action routes when a compiled route is missing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(artifacts): report compiled connector records when a storyboard route is missing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(artifacts): write the storyboard fixture's action in Cocoa syntax
MacFixture.storyboard declared its button action with the iOS attribute,
<action selector="buildTapped:" destination="vc1">. Cocoa documents
name an action's receiver with target=. ibtool compiled the iOS spelling
into an NSNibControlConnector whose NSSource is the view controller
placeholder and whose NSDestination is the button. That is the reverse
of what Xcode-authored AppKit NIBs contain (Music, Chess,
KeepingYouAwake, and Transmission all archive NSSource as the control),
and it is what the old inversion had matched. With target= the compiled
fixture archives the button as NSSource. The temporary connector dump is
removed; the observed routes remain in the assertion message.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Compiled UIKit NIBs and storyboards archive outlets and control actions
as UIRuntimeOutletConnection and UIRuntimeEventConnection with
UISource, UIDestination, and UILabel. The NIBArchive projection
recognized only AppKit *Connector classes with NS-prefixed keys, so an
iOS app produced no outlet or action edges: Stash's 64 decoded documents
yielded none. These connections are now projected with the same
source -> destination roles, an event connection carries its
UIEventMask as ui_event_mask, UIClassSwapper reports its UIClassName,
UIProxyObject is a placeholder, and connection records are no longer
emitted as unknown objects.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Carry the Info.plist that declared the program file on the target as
bundleInfoPlist, so inspect_plist defaults to it even when the program
file is a symlink into another bundle directory.
- Accept a readable Info.plist symlink, as reading the plist directly did.
- Treat only a missing path as an absent layout or wrapper; a permission
denial now reaches the resolver's permission-denied classification.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every native command rejected an iOS app installed on an Apple silicon
Mac, such as /Applications/Stash.app, with "app has no readable
CFBundleExecutable": the resolver understood only the macOS layout,
Contents/Info.plist with Contents/MacOS/<executable>. iOS-style bundles,
including those extracted from an IPA, keep Info.plist and the program
file at the bundle root, and an iOS-on-Mac wrapper holds that bundle in
Wrapper/<Name>.app.
Bundle resolution moves to AppBundleExecutable and accepts the macOS
layout, then the flat layout, then a wrapper's single real Wrapper/*.app
directory. The WrappedBundle symlink is never followed, and the program
file must stay inside its bundle. inspect_plist defaults to the Info.plist
beside the program file when the bundle has no Contents/Info.plist.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* perf(graph): avoid repeated traversal edge scans and copies
* fix(android)!: preserve JVM settings and reuse metadata sessions
Read class metadata without generating application source, retain immutable serialized APK sessions, and join owned cleanup on cancellation and shutdown.
BREAKING CHANGE: Android analysis now requires a full JDK 17 or newer with its compiler module for the packaged Java source bridge.
NSNibControlConnector archives the sending control as NSSource and the
action target as NSDestination; a nil target is the first responder. The
NIBArchive projection swapped them for control connectors, so every
compiled AppKit action ran from its target to the control. The action
trace, which follows control -> action, could not find them, and the
selector node was keyed by the control instead of the target class. When
the target was nil, the swapped source was null and the action was
dropped: Chess lost 29 menu actions, KeepingYouAwake 7.
Connectors now keep NSSource -> NSDestination. The NIBArchive test
encoder moves to a fixture module so a bundle test can build compiled
NIBs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
decode_interface_builder failed on every flat (keyed-archive) NIB that
holds plist data or dates. Archived colors keep their components as
data, so this covers nearly every AppKit NIB: XLD.app decoded 0 of 64.
The decoded Uint8Array and Date values failed JSON validation. They now
use the shared plist projection, which keeps them as explicit
$plist_type values.
Decoding those archives exposed a second failure. The keyed-archive
parser inlined every UID reference up to 16 levels for every object, so
an archive whose views reference their window, superview, and next key
view expanded exponentially. A 9 KB NIB took 3 s, and a 158 KB
MainMenu.nib did not finish. A reference now resolves to its string, or
to a stub naming the referenced object's archive UID, authored ID, and
class. The hierarchy walk visits each object once. The parser also reads
XML CF$UID references and treats UID 0 as nil.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#885 decodes XML plists that contain a __proto__ key by omitting those
entries, but signature entitlements and Interface Builder plists dropped
the omission count. inspect_signature returned an entitlement set that
looked complete, and archive_decode stayed complete. Both now report the
omission: a signature limitation, and a partial archive_decode facet with
reason dictionary_entries_omitted and a per-document limitation.
The placeholder that stands in for __proto__ was reserved against the raw
XML text, so an entity-encoded key such as __rea_prototype_key__
decoded to the placeholder and was omitted as if it were __proto__. The
placeholder is now reserved against the decoded text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ysopwnable