mirror of
https://github.com/morluto/rea.git
synced 2026-11-03 13:26:10 +00:00
6e9ee97a69cb16c7150d8b550e705cba055ee4f0
26
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Entrpiandmorluto
|
b43c329df7 |
feat(artifacts): inventory and extract UF2 and DfuSe firmware containers (#8230)
* feat(artifacts): inventory and extract UF2 and DfuSe regions open_binary refused UF2 and DfuSe firmware containers as an unsupported format, so inspect_artifact and extract_artifact could not show which bytes a drag-and-drop or DFU update writes at which addresses. UF2 is recognized by a complete first block with all three magic numbers. Valid main-flash payloads are joined into address-contiguous regions per familyID, named family-0x<id>/0x<start>-0x<end>.bin, and known IDs are named from a small table copied from Microsoft's uf2families.json at a pinned commit. Numbering is counted per familyID and block count: absent, repeated, out-of-order and out-of-range block numbers are reported, and absent blocks leave coverage unknown. Not-main-flash blocks are excluded and reported; file-container blocks are reported and leave coverage unknown; invalid blocks and a partial final block are excluded with their position. A rewrite of one address with different bytes fails closed, naming both block spans. DfuSe is recognized only by its prefix together with a DFU 1.1a suffix. Each element becomes one region at its file range with its target's alternate setting and name. Structural faults fail closed with a byte offset; overlapping elements stay separate and are reported. A suffix CRC mismatch follows integrity_policy: fail refuses with a dfu-crc32 integrity error, and record-and-continue records a root contradiction that extraction also carries. HEX, UF2 and DfuSe share one retained-region reader and one run merger, so the HEX decoder and reader lose their private copies. * docs(artifacts): document UF2 and DfuSe images and their esptool lane Describe recognition, region names, metadata, numbering, failures, the DfuSe suffix CRC under integrity_policy, and limits, and link the page from the CLI and firmware guides and the agent skill reference. npm run verify:uf2 runs esptool merge-bin --format uf2 on generated inputs at known addresses, with and without MD5, with 256-byte payloads, and on a concatenation of two chips' outputs. Inspection and extraction through the built CLI must return every input at its address under the familyID esptool itself reports. * fix(artifacts): accept both DfuSe image size conventions UM0391 calls DFUImageSize the file length, and dfu-util's dfuse-pack.py writes that value, while ST's DfuFileMgr, MicroPython's dfu.py and pydfu leave the 16-byte suffix out. The decoder accepted only the second form, so it refused dfuse-pack.py output as malformed. Accept either value and keep the declared one in image_size; any other value still fails with the suffix offset and the file length. The tests pin both producers' output for one image, CRC included, from their build() functions transcribed and run under Python 3. * fix(artifacts): keep reused UF2 block numbers from hiding missing blocks esptool numbers every merged input from 0, so two inputs with the same block count share one numbering group. A block lost from one input left its number present in the other, and the file reported complete coverage. Each block number now records the target addresses it was seen at: equal address counts are complete copies, a resend to the same address is one block, and unequal counts make coverage unknown with a limitation and ambiguous_numbering_group_count. sequence_count becomes numbering_group_count, and region block positions become first_file_block and last_file_block. Review follow-ups in the same change: - compare_artifacts compares a DfuSe element's alternate setting and target name, so bytes moved to another device memory are changed; - the shared reader keeps no region bytes outside its map after close; - one domain type replaces four identical decoder failure types; - the UF2 decoder returns a typed limit instead of throwing on bytes beyond its admitted size, and caps retained regions, not runs; - DfuSe caps elements with bytes only, names empty elements and element-less targets, drops the constant bVersion and bcdDFU fields, and says whether the CRC matches when DFUImageSize fits neither convention; - classification evidence carries a suffix only when the probe saw the end, and root classification reads the tail only for a DfuSe prefix; - the UF2 domain region owns family_name, and the root records the family registry revision; the table's MIT notice is preserved; - docs pin the producer revisions (dfu-util ee6b393d and f9a537c9, MicroPython cb99ca98), give the MD5 structure's real meaning, and describe container contradictions in the MCP contract guide; - tests and the esptool lane add the equal-count inputs and a block lost from one of them, accepted boundaries beside each refusal, a DfuSe root larger than the classification prefix, and CLI refusals. * feat(artifacts): name the UF2 families that LibreTiny builds for LibreTiny writes UF2 for Realtek, Beken and Bouffalo Lab modules. The Microsoft registry revision REA already cites (cf3bd7f9) lists eight of those families: RTL8710A, RTL8710B, RTL8720C, RTL8720D, BK7231U, BK7231N, BK7251 and BL602. Their regions now carry those names. LN882H, which that revision omits, keeps its familyID with no name. * fix(artifacts): count DfuSe declarations without bytes instead of listing them Empty DfuSe elements have no entry, so DFUSE_MAX_ELEMENTS does not cap them, and the target walk kept a description string for each one. At 8 bytes per element, a file under the 128 MiB ceiling can declare about 16.7 million of them. The walk now counts every declaration without bytes and builds only the first NAMED_ELEMENTS descriptions, which is all that the limitation shows. The limitation text and empty_element_count do not change. The guide now says that both DfuSe limitations name the first four. On this host, decoding 4,000,000 empty elements (a 32 MB file) ran out of memory under a 128 MB V8 heap before this change, and it peaked at 1.59 GB RSS with the default heap. It now decodes in 114 ms with a 220 MB peak. --------- Co-authored-by: morluto <76467478+morluto@users.noreply.github.com> |
||
|
Entrpi
|
e6d0618979 |
feat(artifacts): inventory and extract ESP flash layouts (#8228)
* feat(artifacts): inventory and extract ESP32 firmware images ESP32-family app and bootloader images (magic 0xE9) had no reader, so open_binary refused OTA downloads, app partitions and bootloaders. Add the esp-image container format behind inspect_artifact and extract_artifact. A pure decoder reads each byte once and keeps only fixed-size fields. Derived facts cover the chip, from a table cited to ESP-IDF v6.1; segment classification as ESP-IDF's should_map and should_load; checksum and appended SHA-256 results; app and bootloader descriptors; Secure Boot v2 signature blocks, observed and unverified; and undescribed trailing byte ranges. Truncation and undescribed bytes make coverage unknown. ESP8266 images are refused with a specific reason, and ciphertext stays unrecognized. Add the format to every target, Evidence, snapshot, live-summary and artifact vocabulary, document it, and add an optional verify:esp-images lane that compares esptool-built images with esptool image-info and espsecure signature-info-v2. Refs #3615 * test(artifacts): run the ESP image lane on esptool v5.6.0 The lane compared descriptor fields only when esptool image-info printed one, so a descriptor that REA reports and esptool does not print passed without comparison. Compare the descriptor kind in both directions. Record that the lane passed for all 13 images with esptool and espsecure v5.6.0, the version the layout facts cite, as well as with 4.12.0. * refactor(artifacts): define ESP image layout sizes once The decoder and the derived facts each defined the segment-header, appended-digest and flash-sector sizes, the erased-byte scan and the offset formatter. Define them once with the other fixed-layout structures and import them in both places. The signature slot count is the one constant that drives the slot scan. Correct the observedEnd comment: it is the end of the last chunk read. * fix(artifacts): report ESP-IDF's segment length limit by chip ESP-IDF's verify_segment_header rejects a segment of 16 MiB or more unless the chip maps flash through 32-bit cache addresses (SOC_SPI_MEM_SUPPORT_CACHE_32BIT_ADDR_MAP: ESP32-S3, P4, C5, C61, H4 and S31 in v6.1). Record that capability in the chip table and add a limitation for such segments; unknown chips get none. `loaded` repeats should_load. It does not mean the bootloader accepts the segment: verify_load_addresses still rejects one outside the chip's RAM, which REA does not model. Say so in the docs, the skill reference and the inventory limitation. * test(artifacts): check ESP lane tools first and verify extraction The lane started work before checking its tools, so a missing RISC-V target, ld.lld, esptool or espsecure surfaced as a raw spawn or command error. Check each one before building and name the variable to set. Warn when esptool is not v5.6.0, the release the layout facts cite. Assert each segment's class for the ESP32-C3 app, its variants and the bootloader, as the Xtensa image already did. Extract the app and the signed image through the CLI and compare every file with the bytes at esptool's segment offsets or in the appended signature sector; the source's SHA-256 must be unchanged and equal the reported root_sha256. * docs(artifacts): state what the ESP image lane does not establish The Verification section listed the lane's checks but not its gaps: only ESP32-C3 and ESP32 images come from a real producer, no real project build, OTA download or flash dump is inspected, no signature is verified, and the lane does not run in CI. Record the timing of the final lane run on esptool v5.6.0. * fix(artifacts): compare ESP segment declarations Segment entries hash only their data, so compare_artifacts reported a segment that moved to another load address with the same bytes as unchanged; only the image itself changed. Compare each segment's load_addr and data_len as its declaration, as Node SEA and PyInstaller members are compared, and count a changed declaration as a metadata change, also when content is unavailable. Header offsets are layout and the classification is derived, so neither is compared. * test(artifacts): run ESP lane commands as owned process trees The lane ran its tools through execFile. A timeout killed only the direct child, so a linker or assembler that Clang or GCC had started could keep running while the lane removed its workspace. Run every command through createVerifierCommands, check the tools inside withVerifierCleanup, and remove the workspace only after commands.close() has stopped every tree; a failed close keeps the workspace. Only a nonzero exit now counts as a refusal or an expected esptool failure; timeouts and spawn failures propagate. Supervising each command roughly doubles the lane's run time. * test(artifacts): cancel ESP decoding after its first decoded chunk The cancellation test requested cancel or close on setImmediate, which can land while the file is still being opened and checked, so it never showed that decoding had started. It also passed against a reader that ignored both requests while decoding. Acknowledge the decoder's first chunk, then cancel or close, join the operation, and assert that no later chunk reaches the decoder and that the reader ends closed. * docs(artifacts): record which ESP metadata comparison ignores Segments are compared by their declaration. The image's and the signature blocks' format_metadata are not: every field comes from their own bytes, which content comparison already covers, and a block's image_digest_matches follows the image's content. * feat(artifacts): inventory and extract ESP flash layouts A whole-flash dump of an ESP32-family chip was read as its bootloader image, with the partition table, apps and data left as undescribed bytes, or refused when it began with erased flash. Read it as an esp-flash-image container instead. The partition table is decoded as esp_partition_table_verify accepts it and is found at the caller's partition_table_offset, at the default 0x8000, or by scanning 0x1000-aligned sectors for a table whose MD5 verifies, which the inventory reports as derived. The bootloader is located at its chip's ROM bootloader offset. Each partition is an entry with its declaration in flat format_metadata; the bootloader and app partitions carry ESP image facts from the existing streaming decoder; the otadata records are reported with a selection derived without rollback or anti-rollback, and the running partition stays unknown. One unreadable partition does not hide the others, and extraction writes every partition, nvs_keys included, as ordinary data. Flash layouts are detected before single ESP images. The scan runs only when an ESP image sits at a ROM bootloader offset, and is refused when a bootloader at another chip's offset shows that the dump does not start at flash address 0. open_binary gains flash_offset and partition_table_offset, which require format esp-flash-image and are part of the snapshot target identity; the CLI takes them with --target-format esp-flash-image. Comparison treats a partition's label, type, subtype, range and flags as its declaration. * test(artifacts): verify ESP flash layouts with gen_esp32part, merge-bin and otatool Add the optional verify:esp-flash lane. It builds default and relocated partition tables with ESP-IDF's gen_esp32part.py, assembles dumps with esptool merge-bin, including one written from flash 0x1000, and writes OTA records with otatool through flash_file_tool.py, which replaces parttool's esptool calls with reads and writes of the dump file. It compares REA's bootloader and app facts with esptool image-info, every partition with gen_esp32part.py's decoding of the extracted table, and the OTA records and derived slot with otatool read_otadata after each switch. It also checks extracted bytes and source integrity, the scan and caller table offsets, flash_offset on the 0x1000 dump, a corrupted app beside valid partitions and a truncated dump. ESP32 linker scripts place the conformance bootloader and app in ESP32 address ranges. * fix(artifacts): read ESP flash layouts as the bootloader does Read the partition table as bootloader_utility_load_partition_table does: the last factory, otadata and same-subtype OTA declaration wins, and a limitation names repeats. Plan each otadata record within its partition and the dump. An otadata partition smaller than two sectors selects none, the bootloader's INVALID_INDEX; a record the dump lacks leaves the selection unknown while the other record stays reported. The fallbacks follow the bootloader's indexes: ota_0-fallback and factory-fallback name no partition when the table declares none, and the assumptions add GPIO holds and deep-sleep wake. Refuse a dump whose bootloader contradicts its origin before the default table offset is tried, whether flash_offset was omitted or given, and keep the ESP image reader's ESP8266 refusal. A table never lies inside the located bootloader image, so single app images are no longer scanned. An explicit esp-flash-image selection is decided before other container signatures, and the native commands' --target-format no longer takes it. Say when no bootloader confirms the default origin. Exempt the primary bootloader and partition_table entries of ESP-IDF 5.3 from placement limits, report every region inside a longer one, and name partitions by index when labels repeat ignoring case. Keep an undecodable label's bytes in label_hex and compare them. Word undescribed ranges as starting at a byte that is not erased, and treat a short erased region as erased. Add an MCP compare_artifacts test for partition declarations, reader identity and close tests, scan edge cases, the 0x2000 ROM offset and a literal otatool CRC. * test(artifacts): verify ESP primary layout entries and the otadata fallback Build a table with the primary bootloader and partition_table entries that gen_esp32part.py fills from --primary-bootloader-offset, and check that REA reads it with complete coverage, no overlap or misplacement limitation, and a table that agrees with gen_esp32part's decoding. Erase the otadata with otatool after the slot switches and check the records against read_otadata and the factory fallback. * fix(artifacts): keep ESP flash coverage complete for a dump cut short An esptool merge-bin dump ends after the last part it wrote, usually inside its last partition. Such a partition made the layout's coverage unknown, so artifact comparison of two merge-bin dumps reported every unchanged partition as unknown. The partition table names every partition whatever the file's length, so a partition cut short or left out by the end of the file hides no entry. As the ESP image reader does for a cut-short segment, its entry holds the bytes the file has and an entry limitation gives the declared size; a partition with no bytes stays in partitions_outside_dump. Coverage stays complete unless undescribed bytes remain or no bootloader is located. An MCP compare_artifacts test of two dumps that end inside ota_0 now classifies every partition, and fails on the old rule. * fix(artifacts): report written bytes in ESP partitions, erased slots included An app slot is erased for ESP-IDF's bootloader when its image header bytes are erased flash, and REA reported only that status. A slot can still hold data further in: a dump read from a device held a complete older app image 1 MiB into an OTA slot reported as erased, with no limitation. Each partition entry now records where the bytes the dump holds are written, relative to the partition: written_offset, the first byte that is not 0xFF, written_end, just past the last, and written_bytes, how many are not 0xFF. They are null for a partition outside the dump. The status stays erased, which is the bootloader's view, and a limitation names an erased app slot that holds written bytes and says they are not read as an image. The reader reads every partition byte once more to find them. * fix(artifacts): derive the ESP boot selection for every partition table The boot selection lived inside otadata, so a table without an otadata partition, the common factory-only layout, had none. ESP-IDF's bootloader_utility_get_selected_boot_partition returns the factory index when the table declares no otadata partition. Move it to a top-level boot_selection that every layout has. Its basis names the bootloader's branch: otadata, factory-fallback and ota_0-fallback from the records, no-otadata for a table without otadata, none for the bootloader's INVALID_INDEX, and unknown when the dump lacks a record the bootloader reads, which replaces the null selection. running_partition moves with it, and otadata keeps its partition index and records. The assumptions name what each branch leaves out: no records assumption without otadata, and none for none or unknown. The real-tool lane checks no-otadata on a table gen_esp32part built without otadata. * fix(artifacts): say when an ESP image is a flash dump read from 0x1000 An ESP32 dump read from flash 0x1000, as read-flash 0x1000 or merge-bin --target-offset 0x1000 writes it, opened automatically as its bootloader image with a megabyte of undescribed bytes and no next probe. The flash reader refuses that origin, but nothing told an agent which flash_offset to pass. espFlashDumpOrigin owns the inference: an image of a chip whose ROM loads the bootloader from flash R, at file offset F, is the bootloader of a dump read from R - F when a partition table sits where that origin puts 0x8000. The ESP image reader asks it for a non-app image at file offset 0, so the result does not depend on how the reader was created, and records flash_dump {flash_offset, table_file_offset}, null otherwise, with a limitation that says to reopen the file as esp-flash-image with that flash_offset. inspect_artifact proposes the same open_binary call as a next probe, and the flash reader's misplaced-origin refusal names the offset. * perf(artifacts): summarize nested ESP images in the flash layout summary view The summary view returned an ESP flash layout's root facts whole, so each app partition and the bootloader carried every segment and signature block, about half of a dump's summary. The summary view now gives each nested image a summary instead of its facts: status, chip, entry point, segment count, load ranges (each mapped, loaded or unclassified segment's address and declared length), the checksum and appended SHA-256 statuses, coverage and limitations. Complete detail keeps the full facts, every segment included, and the retained Evidence is unchanged. On a 16 MiB device dump the summary's root falls from 5,141 to 2,657 bytes, and the summary Evidence from 10,038 to 7,554. * test(artifacts): expect the misplaced image the ESP bootloader search reports |
||
|
morlutoandCursor Agent
|
34577eb1cc |
fix(filesystem): preserve undecodable symlink targets (#7935)
* fix(firmware): preserve symlink target bytes * fix(apple): preserve undecodable dylib link targets * style(tests): fix CI formatting * test(firmware): select the named contract directly * test(firmware): record raw bytes for a decodable symlink target * test(mcp): assert bundle path issues by field compare_bundles reports each relative path as an invalid_format issue instead of one joined diagnostic sentence. * test(firmware): stat raw links without following them access follows a symlink, so a published dangling raw-link still looked absent. lstat and readlink inspect the link itself. --------- Co-authored-by: Cursor Agent <cursoragent@cursor.com> |
||
|
|
d39b3000ec |
feat(artifacts): inventory and extract U-Boot FIT images (#7771)
* feat(artifacts): inventory and extract U-Boot FIT images open_binary refused U-Boot Flattened Image Tree files as an unsupported format, so inspect_artifact and extract_artifact could not list or recover a FIT's kernel, devicetree, ramdisk and loadable images. Recognize an FDT v16/v17 with a top-level /images node and parse it with the existing parseDevicetree. Each /images child becomes an inventory entry named images/<unit-name>.bin that extracts its stored bytes from embedded data, data-offset (past the 4-aligned devicetree end) or data-position (from the file start). Image format_metadata records the declared type, arch, os, compression, load and entry; root metadata records the description, timestamp and configurations. crc32, md5, sha1, sha256, sha384 and sha512 hash nodes are verified in one streamed pass per image; other algorithms are reported unverified. Signatures are reported, not verified, and nothing is decompressed, decrypted or executed. Data outside the file, overlapping or duplicate image data, a missing or repeated data source and hash mismatches fail closed. The devicetree is bounded by the fixed 16 MiB allowance; external image data is streamed from disk. Refs #7129 * fix(artifacts): bound FIT configuration references and suggest analysis only for plain images * fix(artifacts): retain buffered FIT stream cancellation * test(artifacts): gate FIT faults on the observed read phase * fix(artifacts): verify FIT links and summary identities * fix(artifacts): bound FIT diagnostics and retain unknown signatures * fix(artifacts): compare FIT declarations and resolved data links * fix(artifacts): admit FIT raw probes through the shared loader contract * fix(artifacts): preserve FIT field availability independently * fix(artifacts): isolate nested entry metadata from reader facts --------- Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com> Co-authored-by: gensokyo-dev <342580529+users.noreply.github.com> |
||
|
Dragolone
|
f19436c156 |
fix(artifacts): split U-Boot script uImages on their size table (#7805)
U-Boot's mkimage writes the multi-file size table for script images
(`mkimage -T script`, the boot.scr format) exactly as it does for multi
images, `mkimage -l` lists the script as "Image 0", and the `source`
command skips the table before running the script ("scripts are just
multi-image files with one component", boot/image-board.c).
The uImage reader parsed the table only for IH_TYPE_MULTI, so a script
image reported sub_image_count 0 and exposed only payload.bin, whose
first bytes are the binary size table rather than the script text.
Treat IH_TYPE_SCRIPT like IH_TYPE_MULTI: parse the same bounded table,
expose image-<n>.bin components and report the size-table limitation.
payload.bin is unchanged. A script payload without a valid table now
fails closed, as a multi image already does.
|
||
|
Entrpiandgensokyo-dev
|
64196b08ca |
feat(artifacts): inventory and extract ESP32 firmware images (#7498)
* feat(artifacts): inventory and extract ESP32 firmware images ESP32-family app and bootloader images (magic 0xE9) had no reader, so open_binary refused OTA downloads, app partitions and bootloaders. Add the esp-image container format behind inspect_artifact and extract_artifact. A pure decoder reads each byte once and keeps only fixed-size fields. Derived facts cover the chip, from a table cited to ESP-IDF v6.1; segment classification as ESP-IDF's should_map and should_load; checksum and appended SHA-256 results; app and bootloader descriptors; Secure Boot v2 signature blocks, observed and unverified; and undescribed trailing byte ranges. Truncation and undescribed bytes make coverage unknown. ESP8266 images are refused with a specific reason, and ciphertext stays unrecognized. Add the format to every target, Evidence, snapshot, live-summary and artifact vocabulary, document it, and add an optional verify:esp-images lane that compares esptool-built images with esptool image-info and espsecure signature-info-v2. Refs #3615 * test(artifacts): run the ESP image lane on esptool v5.6.0 The lane compared descriptor fields only when esptool image-info printed one, so a descriptor that REA reports and esptool does not print passed without comparison. Compare the descriptor kind in both directions. Record that the lane passed for all 13 images with esptool and espsecure v5.6.0, the version the layout facts cite, as well as with 4.12.0. * refactor(artifacts): define ESP image layout sizes once The decoder and the derived facts each defined the segment-header, appended-digest and flash-sector sizes, the erased-byte scan and the offset formatter. Define them once with the other fixed-layout structures and import them in both places. The signature slot count is the one constant that drives the slot scan. Correct the observedEnd comment: it is the end of the last chunk read. * fix(artifacts): report ESP-IDF's segment length limit by chip ESP-IDF's verify_segment_header rejects a segment of 16 MiB or more unless the chip maps flash through 32-bit cache addresses (SOC_SPI_MEM_SUPPORT_CACHE_32BIT_ADDR_MAP: ESP32-S3, P4, C5, C61, H4 and S31 in v6.1). Record that capability in the chip table and add a limitation for such segments; unknown chips get none. `loaded` repeats should_load. It does not mean the bootloader accepts the segment: verify_load_addresses still rejects one outside the chip's RAM, which REA does not model. Say so in the docs, the skill reference and the inventory limitation. * test(artifacts): check ESP lane tools first and verify extraction The lane started work before checking its tools, so a missing RISC-V target, ld.lld, esptool or espsecure surfaced as a raw spawn or command error. Check each one before building and name the variable to set. Warn when esptool is not v5.6.0, the release the layout facts cite. Assert each segment's class for the ESP32-C3 app, its variants and the bootloader, as the Xtensa image already did. Extract the app and the signed image through the CLI and compare every file with the bytes at esptool's segment offsets or in the appended signature sector; the source's SHA-256 must be unchanged and equal the reported root_sha256. * docs(artifacts): state what the ESP image lane does not establish The Verification section listed the lane's checks but not its gaps: only ESP32-C3 and ESP32 images come from a real producer, no real project build, OTA download or flash dump is inspected, no signature is verified, and the lane does not run in CI. Record the timing of the final lane run on esptool v5.6.0. * fix(artifacts): compare ESP segment declarations Segment entries hash only their data, so compare_artifacts reported a segment that moved to another load address with the same bytes as unchanged; only the image itself changed. Compare each segment's load_addr and data_len as its declaration, as Node SEA and PyInstaller members are compared, and count a changed declaration as a metadata change, also when content is unavailable. Header offsets are layout and the classification is derived, so neither is compared. * test(artifacts): run ESP lane commands as owned process trees The lane ran its tools through execFile. A timeout killed only the direct child, so a linker or assembler that Clang or GCC had started could keep running while the lane removed its workspace. Run every command through createVerifierCommands, check the tools inside withVerifierCleanup, and remove the workspace only after commands.close() has stopped every tree; a failed close keeps the workspace. Only a nonzero exit now counts as a refusal or an expected esptool failure; timeouts and spawn failures propagate. Supervising each command roughly doubles the lane's run time. * test(artifacts): cancel ESP decoding after its first decoded chunk The cancellation test requested cancel or close on setImmediate, which can land while the file is still being opened and checked, so it never showed that decoding had started. It also passed against a reader that ignored both requests while decoding. Acknowledge the decoder's first chunk, then cancel or close, join the operation, and assert that no later chunk reaches the decoder and that the reader ends closed. * docs(artifacts): record which ESP metadata comparison ignores Segments are compared by their declaration. The image's and the signature blocks' format_metadata are not: every field comes from their own bytes, which content comparison already covers, and a block's image_digest_matches follows the image's content. * docs(artifacts): state that ESP mmu_page_size is a base-2 logarithm The app descriptor's mmu_page_size keeps ESP-IDF's name and value, the MMU page size in log base 2 as esp_app_desc_t declares it, so 16 means 64 KiB. Say so in docs/esp-image.md and the schema comment; a reader could otherwise take 16 as 16 KiB. * fix(esp-image): retain member consumption and share lifecycle regressions * test(artifacts): scope MCP catalogs and budget full-schema validation * test(artifacts): verify compact output profiles and document bounded catalogs * test(artifacts): close readers when cleanup-test admission fails * test(artifacts): compare ESP image limitations with their owners The decoder and reader tests froze complete limitation sentences, so a harmless rewording failed them. The wording now has two owners: ESP_IMAGE_LIMITATIONS in espImageFacts.ts, which the decoder, the inventory and the reader use, and ESP_DESCRIPTOR_LIMITATIONS beside the descriptor decoder. Tests compare delivered limitations with the owner, called with the facts each case establishes (segment index, declared and available bytes, offsets, chip, page range), next to the structured assertions they already make. Delivered text is unchanged. * test(esp-image): assert structured facts and owned guidance * fix(esp-image): keep spi_flash_mode and descriptor fields before a truncated tail ESP-IDF v6.1's esp_app_desc_t declares spi_flash_mode at byte 181, after mmu_page_size, as the committed reference layout shows; the descriptor now keeps it as stored. The decoder also required all 256 descriptor bytes, though it reads none past byte 181, so a file ending in the reserved tail lost the version, project, digest and revision facts it does hold. The app descriptor now needs only its fields; the segment's truncation is reported as before. * test(esp-image): pin the P-192 public key digest to espsecure's layout espsecure packs ECDSA signature blocks as "<BBBx32sB64s64s1031x" and zero-pads a 48-byte P-192 point to 64 bytes, so the signature starts at byte 101 for every SHA-256 curve. signature_info_v2 hashes sig_block[36:101] and _digest_sbv2_public_key the curve ID with the padded point. No test built a P-192 block; this one checks public_key_sha256 against that definition. * fix(esp-image): keep each app descriptor field the file holds in full A file can end anywhere inside the 256-byte esp_app_desc_t. The decoder needed every field byte, so a cut at byte 176 dropped the version, project and app_elf_sha256 it does hold. Once the 4-byte magic identifies an app descriptor, each field is now kept when the file holds all of its bytes and is null otherwise; observed_length records where the descriptor ends, so a cut field is told apart from text that is not UTF-8. The fields after the magic become nullable in the metadata schema. * fix(esp-image): report a signature block whose image digest does not match A CRC-valid Secure Boot v2 block can carry another image's digest. The block recorded image_digest_matches false, but no limitation said so, unlike a checksum or appended-SHA mismatch, so CLI and MCP summaries showed only the generic unverified note. The mismatch is now a limitation; coverage stays complete and signature_status stays unverified. The three other signature-sector limitations move into ESP_IMAGE_LIMITATIONS with their text unchanged, so all ESP image wording has one owner. * refactor(esp-image): remove redundant descriptor byte guards --------- Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com> |
||
|
Cipherandgensokyo-dev
|
18a8e71c9f |
feat(artifacts): add U-Boot legacy uImage reader (part of #7129) (#7234)
* feat(artifacts): add U-Boot legacy uImage reader (part of #7129) Recognize legacy uImages by their 0x27051956 magic and inventory them as containers: 64-byte header facts (arch/os/type/compression raw and named, load/entry addresses, name, timestamp) with header and data CRC32 verified, stored payload extractable as payload.bin, and multi-file images split from the stored size table into image-<n>.bin. Compressed payloads stay as stored; nothing is executed or decompressed. Wires the format through classification, the artifact reader dispatch, extraction, and the evidence/snapshot format vocabularies. Related to #7129 (uImage part only); HEX/SREC and FIT are out of scope. * fix(uimage): preserve aligned component ranges and exact header facts * fix(uimage): retain buffered members through consumption and cancellation * fix(uimage): preserve active read and validation failure precedence --------- Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com> |
||
|
Aadityaandgensokyo-dev
|
c36971953c |
feat(artifacts): inventory and extract Intel HEX and Motorola S-record regions (#7136)
* feat(artifacts): inventory and extract Intel HEX and Motorola S-record regions open_binary refused Intel HEX and S-record programming files as an unsupported format, so inspect_artifact and extract_artifact could not answer which bytes load at which addresses. Recognize both encodings by a fully valid first record and decode them statically into address-contiguous regions, each an inventory entry named 0x<start>-0x<end>.bin and extractable as raw bytes. Root format_metadata records the encoding and variant, record counts, unique and duplicate bytes, address bounds, termination, declared start address, S0 header and validated S5/S6 count. Gaps are never filled; start addresses are declared facts, not proven entry points. Checksum, record-type, byte-count, line-length, overlap-conflict, address wrap and post-termination errors fail closed with the line number; a missing termination record leaves coverage unknown. Decoding is bounded by a 128 MiB file ceiling (decoded bytes are at most half the file and are reserved after the size check) and 65,536 address-discontiguous runs. Refs #7129 * fix(artifacts): refuse Intel HEX extended address records with a non-zero address * fix(artifacts): bound HEX region copies and retain stream cancellation --------- Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com> |
||
|
Saim Shafiqueandgensokyo-dev
|
0d1a454e25 |
fix(ghidra): admit newer 12.x releases as compatible builds (#6924)
Admit same-major Ghidra releases at or above the verified minor through the existing compatible/unverified policy. Preserve the observed version, verified12.1.4 pin, installation-declared Java floor and separate NativeAOT verification gate. 367 targeted tests/static/docs, all10 real Java bridge-source compilation, and actual Linux12.2/JDK25 CLI/MCP queries and cleanup pass. JDK21 remains refused for12.2. Exact-main controls reproduce all3 unrelated CI assertions; canceled shards and an apt-blocked binary-layout lane remain unverified. Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com> |
||
|
|
b4ba96a9a5 |
feat(firmware): inspect flattened devicetree blobs (#7009)
* feat(firmware): inspect flattened devicetree blobs Adds inspect-devicetree and inspect_devicetree for FDT v16/v17 blobs without target execution or external dependencies. Results include validated headers, reservations, a node/property tree with bounded raw previews, and derived standard values and selected phandle references. Parsing enforces file, tree, and decoded representation budgets and rejects malformed input without partial success. Summary delivery supports retained Evidence pagination, with tests covering parsing, service validation, CLI delivery, and MCP access after the input is removed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_016y53PdpyMAp9RSW65fatHe * fix(firmware): reject conflicting devicetree phandles and bound page summaries A node whose phandle and linux,phandle disagree no longer resolves under either value; the conflict is reported as a limitation. Finalization failures after a completed read retain the file-snapshot-hash partial observation, matching the Go provider. Devicetree view pages carry fixed-size context and counts instead of repeating summary strings, so a large bootargs no longer pushes every page over the MCP response budget. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_016y53PdpyMAp9RSW65fatHe --------- Co-authored-by: Matt Van Horn <455140+mvanhorn@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: morluto <76467478+morluto@users.noreply.github.com> |
||
|
morluto
|
15450643f7 | fix(firmware): preserve admission and extraction coverage outcomes | ||
|
morluto
|
243790adc9 | fix(firmware): derive extraction failure from producer severity | ||
|
Ezra BrilliantandClaude Opus 5.5
|
3ed9f4b7e4 |
docs(firmware): document the Windows Unblob submodule checkout (#6464)
On Windows, the pinned Unblob commit cannot be checked out because 11 upstream fixture paths under tests/integration/ are invalid on NTFS. Document the verified sparse-checkout workaround and point Windows contributors to it from CONTRIBUTING. Claude-Session: https://claude.ai/code/session_01LjhoPGpqAwHwcCgectzRsp Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
Kaoru0822andClaude Opus 5.5
|
c8d3f8f8ec |
fix(firmware): keep a missing producer report distinct after exit 0 (#6008)
* fix(firmware): keep a missing producer report distinct after exit 0 A firmware engine that exits 0 without writing its requested report now fails with the observed report state (missing, empty, invalid_json, oversized, not_regular_file), the command, arguments, exit status and captured output, plus report-specific recovery instead of generic `rea doctor` advice. REA still does not retry or substitute an empty result. Fixes #5876 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(firmware): keep missing-report recovery from replaying removed paths The recorded command arguments name REA's private workspace, which is removed after the attempt. Recovery now presents them as provenance and tells callers to replace every private path when reproducing the run. Cover the oversized and not_regular_file report states. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
gensokyo-dev
|
aa53c06538 |
feat(firmware): make analysis deadlines recoverable per call
Expose per-call firmware analysis budgets with exact recovery guidance, shared CLI/MCP validation and retained actual settings. Keep publication and fixed resource policy independent; preserve typed interruption and one captured-output owner through command and one-shot cleanup. Fixes #5851. Executed verification, real-provider limits, known baseline issues and authorized readiness override are recorded in #5863. Assisted-by: Kogasa (gensokyo-skills:kogasa-surprise-testing) |
||
|
Nitin Kushwaha
|
cf5194f68e |
fix(firmware): separate analysis and publication deadlines (#4602)
Separate extraction/inventory and caller-selectable publication budgets in the shared firmware workflow. Preserve phase, selected timeout, verified progress, caller cancellation identity and committed observations through cleanup. Enforce monotonic expiry even before timer callbacks run. Validated with 101 targeted tests, full static checks, documentation checks and real OpenWrt CLI/MCP workflows with digest and cleanup verification. Existing main CI failures are documented separately. Fixes #4176. |
||
|
morluto
|
0a51b246c6 |
fix(firmware): preserve snapshot input failures and descriptor ownership
Reuse canonical artifact chunk reads across hash, snapshot, range and publication, leaving cleanup to the exact owner. Let the reader own cancellation, preserve same-read physical failures, and classify growth past the input allowance through the existing typed admission failure. Validation: 46 focused tests across four files, docs checks and five conformance tests. Native file IO with controlled faults; no Linux firmware engines verified. Shared post-cleanup error projection remains tracked in #4628. Refs #4619, #4475 |
||
|
|
b11fe63bf4 |
docs(installation): document Linux procps prerequisite
Document the Linux procps-compatible ps prerequisite before quick start and in the installation/provider guides. Scope it to shared process-supervision workflows and give recovery guidance for generic provider startup errors. Actual JavaScript CLI analysis passed with ps and refused an empty PATH with capability_unavailable and retained partial evidence. Real Chrome scenario launch succeeded without ps, confirming the need for qualified wording. Docs checks, formatting, typecheck/lint and diff checks passed. Five English documentation files; no runtime changes. Native Ghidra/JADX/firmware execution was not performed. Fixes #2763 Co-authored-by: Avocado <93173363+HeadmasterEggy@users.noreply.github.com> Co-authored-by: morluto <76467478+morluto@users.noreply.github.com> Co-authored-by: Kaoru0822 <208281322+kaoru0822-kitauji@users.noreply.github.com> Co-authored-by: factory-droid[bot] <138933559+factory-droid[bot]@users.noreply.github.com> |
||
|
morluto
|
5b7fe94710 |
fix(analysis): preserve extraction gaps and database failure reasons
Derive firmware completeness from examined coverage, retain linked continuation evidence, and preserve reported extraction limits. Keep Android package attribution and Go image fixtures coherent, and classify SQLite busy failures without discarding descriptor cleanup facts. Reviewed fixes include firmware, ADB, SQLite, and recorded-transport bug reports and their focused PRs. Validation: firmware report source tests passed 21 cases; prior focused artifact/provider boundaries passed. Real Android devices and external firmware tools were not rerun. |
||
|
The one -Niuandmorluto
|
0baad58e60 |
feat(ghidra): admit RISC-V ELF analysis through a pinned generic lane (#2151)
* feat(ghidra): admit RISC-V ELF analysis through a pinned generic lane Refs #2063. Recognize `EM_RISCV` (243) as a provider-neutral family that carries its own ELF facts, and bound the first Ghidra lane to little-endian `ET_EXEC` images that declare the double-float ABI, pinned to `RISCV:LE:32:default` or `RISCV:LE:64:default` with the `gcc` compiler specification. Ghidra 12.1.4 is not reliable without the pin: its `riscv.opinion` pins `variant="default"` for the 64-bit constraint and leaves the 32-bit constraint with the comment that the loader "must choose between 'default' and 'AndeStar' variants". Measured on the installed release tree, a source-owned generic RV32 ELF with no Andes declaration imports as `RISCV:LE:32:AndeStar_v5:gcc`, while RV64 resolves to `RISCV:LE:64:default:gcc`. The lane therefore states the language per width and refuses any caller-selected processor outside it instead of inheriting the header guess. Refusals name the declaration rather than falling back to a guessed profile: big-endian images (Ghidra 12.1.4 ships no big-endian RISC-V language), non-`ET_EXEC` images, `EF_RISCV_RVE`, `EF_RISCV_TSO`, and every float ABI other than double, which the pinned generic compiler specifications model. The raw e_flags bits stay in Evidence as declarations, not as instruction semantics. Family recognition now has one owner for the ELF-metadata families: `ELF_METADATA_ARCHITECTURES`, `isElfMetadataArchitecture`, and `HeaderArchitecture` replace ten `Exclude<BinaryArchitecture, "mips">` sites that would each have needed a second hand-edited member. `ghidraPinnedLanguage` is that owner for the import commitment: the session readback previously re-derived only the MIPS pin, so a profile committing any second pinned language failed with a language-mismatch error before the bridge started. Hopper and IDA refuse RISC-V by name, matching the MIPS wording. Caller-supplied raw-binary entry keeps its existing four-family list; this lane is ELF-header admission only. Verification on macOS 15.7.7 arm64, Node 24.18.0, Ghidra 12.1.4 PUBLIC and JDK 21.0.12.1, with the host decompiler built from the release sources for `os/mac_arm_64`: `npm run check` passes; `npm run test:fast` passes 396 test files; `npm run verify:test-discovery` discovers all 917 test files exactly once. Source-owned RV32 and RV64 double-float `ET_EXEC` fixtures complete `rea analyze --provider ghidra` and `rea decompile rea_riscv_entry`, committing `RISCV:LE:32:default` and `RISCV:LE:64:default` with `language_selection: provider-pinned-v1`; the soft-float RV64 shape is refused with the named float-ABI reason, and the full refusal matrix including the RV32 and width-mismatch shapes is covered by unit tests. No `verify:ghidra:riscv` lane script is included in this change; the runs above were performed manually against the installed engine. Fork pull requests receive no CI check runs, so the real-provider scope above is the evidence available for review. * fix(ghidra): bound the RISC-V lane by declared flags and document it Address review feedback on #2151. `e_flags` bits outside `EF_RISCV_RVC | EF_RISCV_FLOAT_ABI` are now refused with the offending value named, so a reserved or newer producer declaration cannot enter the verified generic lane by falling through the RVE, TSO and float-ABI checks. Admission reads `e_type` only, so the refusal text no longer calls `ET_EXEC` static: a fixed-address declaration does not establish static linkage, and `PT_INTERP` and dynamic dependencies are not inspected. The session records that boundary as a limitation rather than inferring a load model. Add `docs/ghidra-riscv.md` in the shape of the MIPS lane guide (admission boundary, refusal table, why the language is pinned per class, Evidence fields, and what the fixtures do not establish), and correct `docs/firmware-analysis.md`, which still told users that MIPS and RISC-V decompilation had not been added. Verification after the change: `npm run check` and `npm run docs:check` pass; the RISC-V module tests pass (17 lane cases plus 9 parser cases); on Ghidra 12.1.4 with JDK 21.0.12.1 the RV32 and RV64 double-float fixtures still analyze and decompile with `RISCV:LE:32:default` / `RISCV:LE:64:default` and `language_selection: provider-pinned-v1`, the soft-float fixture is still refused by name, and the new linkage limitation appears in the emitted Evidence. * fix(ghidra): align RISC-V pinning with admission Reuse the complete lane admission boundary when selecting a language, retain unsigned unsupported flag bits in diagnostics, and derive float ABI metadata from the source declaration. * test(ghidra): verify RISC-V CLI and MCP workflows Build source-owned RV32/RV64 fixtures with Clang and LLD, establish independent ELF and symbol facts with LLVM readelf, and verify real provider evidence, instruction bytes, calls, decompilation, schema projections, snapshot replay, refusal diagnostics, source immutability and cleanup. Verified on macOS ARM64 with Ghidra 12.1.4, JDK 21 and LLVM/LLD 23.1.2. Dynamic linkage, big-endian, Andes and RVE/TSO workflows remain unverified; ISA attributes are not inspected. --------- Co-authored-by: morluto <76467478+morluto@users.noreply.github.com> |
||
|
morluto
|
d1235fadc9 |
fix(providers): retain worker cleanup owners through shutdown
Validation: integrated changes passed formatting, typecheck, lint, resolved module-boundary verification and git diff --check. Tests and real-provider workflows were not run. |
||
|
morluto
|
4a45c14742 | fix(firmware): reject malformed UTF-8 producer reports | ||
|
morluto
|
c78fe6990b | docs: publish VitePress documentation on GitHub Pages | ||
|
morlutoandCursor Agent
|
5cbf06c7ad |
fix(ghidra): admit the 12.1 line and the install's JDK range (#840)
* fix(ghidra): admit the 12.1 line and the install's JDK range The provider treated the verified Ghidra 12.1.4 build and JDK 21 as the only legal installation, so a working 12.1.x package or a newer JDK was rejected before analysis started. Admission now follows the 12.1 release line and application.java.min/max. A compatible build other than 12.1.4 keeps its observed version and records that the bridge was verified against 12.1.4. Fixes #821 * fix(ghidra): stop pinning the NativeAOT build to one version string The build script still rejected every Ghidra release except the literal 12.1.4 and every javac except major 21. It now accepts the 12.1 line and javac 21 or newer, compiles with --release 21, and records the observed Ghidra version. The JADX engine version uses the audited release constant. * fix(ghidra): report unverified builds on analysis results Session open uses health only as a startup gate and discards that execution, so the unverified-build limitation never reached CLI or MCP results. Attach it to every Ghidra execution for that install. --------- Co-authored-by: Cursor Agent <cursoragent@cursor.com> |
||
|
morlutoandCursor Agent
|
bef4321afb |
fix(firmware): accept the verified Binwalk and Unblob release lines (#844)
* fix(firmware): accept the verified Binwalk and Unblob release lines Exact --version equality rejected every build except Binwalk 3.1.0 and Unblob 26.6.4, then stored that constant as the observed engine version. Admit the 3.1 and 26.6 lines, keep the audited build as verified, and report the banner that actually ran. * chore(docs): regenerate skill metadata after firmware contract text docs:check failed because SKILL.md lagged the Binwalk/Unblob release-line tool descriptions. --------- Co-authored-by: Cursor Agent <cursoragent@cursor.com> |
||
|
N0zoM1z0
|
5a7c769692 |
feat(firmware): integrate Binwalk and Unblob analysis
* feat(firmware): integrate Binwalk and Unblob analysis * fix(firmware): verify published files and namespace source references * test(firmware): isolate extractor dependency failure from process cleanup * fix(firmware): retain actionable report and cleanup diagnostics * test: assert retained batch output failure diagnostics |