Commit Graph
22 Commits
Author SHA1 Message Date
morluto a8e472967b refactor(process): read Ghidra and Hopper replies through one bounded JSON-line reader (#10699)
* refactor(process): read Ghidra and Hopper replies through one bounded JSON-line reader

Both clients now share JsonLineBridgeReader: UTF-8 framing with a mandatory
reply line ceiling (bridge.max_reply_bytes, REA_BRIDGE_MAX_REPLY_BYTES,
default 256 MiB), one fatal UTF-8 policy, request-id correlation including
rejections on the reserved id 0, and typed stream failures. An oversized
reply is refused as a transport resource constraint naming the setting and
its bytes are discarded. Hopper rejections on id 0 now reach the request on
the wire instead of being dropped.

Deletes GhidraResponseRouter and HopperResponseStream.

* fix(process): bound each bridge reply by the ceiling its own request admitted

* fix(process): admit the bridge reply ceiling before launching Hopper or Ghidra

* fix(ghidra): keep a refused setting's configuration error through the provider boundary

* fix(process): admit both bridge ceilings per request as a typed configuration refusal

A malformed REA_BRIDGE_MAX_REQUEST_BYTES or REA_BRIDGE_MAX_REPLY_BYTES seed covered by a runtime override at startup is refused by the runtime view once the override is reset. Hopper and Ghidra read those getters in the request path (and Hopper re-read the request ceiling when a queued request reached the wire, outside the caller's context), so the refusal was thrown instead of returned. Both clients now copy both ceilings once at admission through readRuntimeSetting, return the ConfigurationError (Ghidra as an admission failure), and write queued requests under the ceilings they were admitted with.

* refactor(config): read rizin, gdb, Kuna, Ghidra and regex settings through readRuntimeSetting (#10795)

Each site caught the ConfigurationError a setting view throws for a malformed launch seed by hand. They now read through readRuntimeSetting and return its Result. GDB reads both debugger limits once per console command and reuses those accepted values for its limitations, timeout and diagnostics instead of re-reading the views after the command ran. Kuna's single-function read returns the refusal after releasing admission instead of throwing it. A counted architecture guard keeps the remaining hand-caught sites from growing.

* refactor(hopper): return typed bridge replies from HopperClient.callTool (#10833)

* refactor(hopper): return typed bridge replies from HopperClient.callTool

The reply contract table existed, but the provider, caller reconciliation and
regex search each applied it after callTool returned JsonValue. callTool is now
typed by method: it validates the reply against that method's contract and
returns the typed reply, or a HopperReplyContractError that names the method
and keeps the raw reply. The caller scan keeps that raw reply as its unread
page or native result. The provider dispatches list_names, file offsets and
the three reconciled operations through their literal methods, and health has
its own contract. Transport tests inject a JSON-value table for the fake
bridge's own methods.

* fix(hopper): refuse value-changing reply contracts and uninstalled methods

parseHopperReply returns the raw reply, so a contract whose input and output types differ (a coercion, default or transform) would promise a type the reply does not hold. ValueKeepingContracts refuses such a schema at compile time, for the production table and any injected one. A client whose type argument names a table it was not given now returns AnalysisCapabilityUnavailableError for a method with no installed contract instead of throwing.

* refactor(hopper): read the startup handshake through the health reply contract (#10853)

parseHopperServerInfo hand-checked each health field that hopperReplySchemas.health already defines. It now parses through that contract, keeps the zod failure as the protocol error's cause, and binds run_id to the launch.

* refactor(kuna): read the project deadline through readRuntimeSetting at each request (#10837)

* refactor(kuna): read the project deadline through readRuntimeSetting at each request

The string, call-graph and xref scans read kuna.project_timeout_ms inside the background producer they start, and the project export read it inside the shared startup promise. A malformed launch seed without an override was thrown from there and reached the caller only through the generic failure mapper; a concurrent waiter that swallows the startup promise's rejection never saw it. Each site now reads the deadline with readRuntimeSetting before starting its work and returns the refusal as that request's value; the export start returns it to each caller that needs the project, and the next request reads it again.

* fix(kuna): return a call-graph deadline refusal from analyze_function

The dossier reported any relationship failure as unavailable call coverage. A call-graph deadline refusal is the request's own setting failure, so it now returns as that ConfigurationError, as cleanup and cancellation already did.

* refactor(kuna): require the accepted project deadline on every export request

Remove acceptedExportDeadline's fallback read of the throwing configuration view. KunaProjectRequest and KunaExportRequest now require the deadline the starting operation accepted; the session passes the one it admitted through readRuntimeSetting into #lookupOrBuild. Direct cache callers in tests take it from one shared helper, withKunaProjectDeadline.

* test(mcp): carry main's Evidence-format const count (#10995) beside the bridge reply setting's

* fix(process): clean Hopper and Ghidra sessions up under the ceilings their start admitted

Cleanup requests re-admitted bridge.max_request_bytes and bridge.max_reply_bytes from the current settings. Once an override covering a malformed launch seed was reset, Hopper's shutdown_document and Ghidra's closing checkpoint_program and shutdown were refused before writing, leaving Hopper's document and files or Ghidra's JVM behind. Each session now keeps the ceilings it admitted at start, and its cleanup requests use them.

* fix(hopper): reauthenticate for cleanup under the session's admitted ceilings

The cleanup reconnect's health handshake still re-admitted the ceilings from the current settings, so a seed refused after an override reset blocked reauthentication and the shutdown after it. It now uses the same session ceilings as the shutdown requests, through one #cleanupLimits accessor.

* refactor(process): report an NDJSON line above its ceiling as a limit parse failure

Utf8NdjsonOversizeError now extends ParseFailureError<"limit"> (format ndjson, limit ndjson-line-bytes) and keeps the observed bytes the transport error reports, so parseFailureFromCause recognizes it like every other byte-format budget.
2026-11-15 20:37:21 +08:00
morluto cabd56ea71 refactor(domain): give strict UTF-8 decoding one owner with an explicit BOM policy (#10728)
* refactor(domain): give strict UTF-8 decoding one owner with an explicit BOM policy

* fix(domain): keep the leading-BOM behaviour every migrated UTF-8 decoder had

* refactor(domain): read the domain layer's strict UTF-8 through the BOM-policy owner (#10803)

Twelve domain decoders built their own fatal TextDecoder with ignoreBOM: true. They now use strictUtf8Decoder("preserve"), which keeps that behaviour: each reads bytes where a leading U+FEFF is content (binary-format names and fields, JSON and XML read byte-for-byte, recorded bodies, registry seeds whose kept bytes are re-emitted). The counted baseline drops from 74 to 62.

* refactor(artifacts): read artifact readers' strict UTF-8 through the BOM-policy owner (#10871)

Fourteen artifact reader modules (17 sites) built their own fatal TextDecoder. They now take it from strictUtf8Decoder with the policy each had: every one kept a leading BOM (ignoreBOM: true), so they use "preserve"; JavaScriptArtifactFiles keeps it for JavaScript and HTML entries and strips it otherwise, as before. The strict-utf8-decoder baseline drops those 17 sites.

* refactor(domain): drop TextDecoder imports left by the strict UTF-8 migration

* refactor(application): read MCP registration metadata through the strict UTF-8 owner

* refactor(formats): read binary-format readers' strict UTF-8 through the BOM-policy owner (#10903)

* refactor(formats): read binary-format readers' strict UTF-8 through the BOM-policy owner

* refactor(formats): drop the model readers' unused TextDecoder imports

* refactor(browser): read browser capture and fetch strict UTF-8 through the BOM-policy owner (#10935)

* refactor(browser): read browser capture and fetch strict UTF-8 through the BOM-policy owner

* refactor(native): read LLDB and Mach-O name strict UTF-8 through the BOM-policy owner (#10936)

* refactor(native): read LLDB and Mach-O name strict UTF-8 through the BOM-policy owner

* refactor(process): read MCP and NDJSON transport frames' strict UTF-8 through the BOM-policy owner (#10937)

* refactor(process): read MCP and NDJSON transport frames' strict UTF-8 through the BOM-policy owner

* refactor(application): read JSON and file inputs' strict UTF-8 through the BOM-policy owner (#10938)

* refactor(application): read JSON and file inputs' strict UTF-8 through the BOM-policy owner

* refactor(providers): read IDA, Electron, Ghidra and reference strict UTF-8 through the BOM-policy owner (#10939)

* refactor(providers): read IDA, Electron, Ghidra and reference strict UTF-8 through the BOM-policy owner

* refactor(evm): read the hex bytecode carrier's strict UTF-8 through the owner and refuse new local decoders (#10940)

* refactor(evm): read the hex bytecode carrier's strict UTF-8 through the BOM-policy owner

* chore(architecture): match local strict UTF-8 decoders in any option order
2026-11-15 19:54:39 +08:00
morluto 530faf43bd refactor(process): take the host from HOST_PLATFORM and require the platform in process helpers (#11038)
* refactor(process): take the host from HOST_PLATFORM and require the platform in process helpers

* refactor(process): require the settlement platform and pass it in string-embedded ownership checks
2026-11-15 19:35:03 +08:00
morluto d5e0747025 refactor(process): build infrastructure cancellations with a required reason (#10595)
* refactor(errors): require a reason for every analysis cancellation

Add cancelledBy, the one constructor for AnalysisCancelledError. Its
reason argument is required: an aborted signal, an earlier cancellation,
a reason carried from an inner failure, or an OwnerCancellation when REA
closed the work's owner itself.

Closed adb, apktool, firmware, sqlite, gdb, web-bundle analyzer and
binary-session record owners now report OwnerCancellation.ownerClosed
instead of an absent reason. Firmware's predecessor wait returns its
cancellation as a Result, removing an unreachable reason-less fallback.

An architecture guard rejects new direct constructions, with a counted
per-file baseline that can only shrink.

* refactor(errors): share one aborted-signal predicate with cancelledBy

* refactor(process): return a departing caller's reason from a shared startup wait

* refactor(providers): build decompiler-provider cancellations with a required reason (#10587)

Migrate every AnalysisCancelledError construction under src/ghidra,
src/ida, src/cutter, src/jeb and src/kuna to cancelledBy and lower the
guard baseline from 671 to 572. Closed Kuna target commands report
OwnerCancellation.ownerClosed instead of an absent reason, and Kuna and
JEB close abort their lifetimes with that typed reason.

* refactor(process): build infrastructure cancellations with a required reason

Migrate every AnalysisCancelledError construction in shared process,
provider, artifact, domain, server and CLI code and in the smaller
providers to cancelledBy, lowering the guard baseline from 671 to 566.
Option bags that carried a cause are split so the cancellation branch
cannot receive one.

* fix(errors): read the reason of any signal-shaped cancellation source

* test(ci): cover the counted-baseline comparison behind the architecture guard
2026-11-15 17:05:23 +08:00
morluto d7250f5d46 refactor(ghidra): build the invalid-regex refusal with the shared owner (#10570)
Ghidra projected the bridge's invalid_regex_pattern code through an inline
copy of the refusal that RegexMatcher's invalidRegexPatternError already owns
for Kuna, Hopper and IDA. Ghidra now calls that owner, passing the bridge's
own message, which already names the pattern and Java's syntax error, as the
user message. The owner accepts error options so Ghidra keeps its cause and
diagnostics.
2026-11-14 15:03:11 -05:00
morluto 3ccb35a8b5 fix(kuna): admit regex settings before acquisition 2026-11-11 20:16:24 +08:00
morluto e8908507c8 fix(settings): preserve regex cancellation and capability truth 2026-11-11 20:16:24 +08:00
Cursor Agent 5ba464527b fix(limits): reject invalid runtime seeds and keep the value an operation used
A malformed migrated launch seed stays on the config and the operation view reports configuration_invalid unless a snapshot override is active. Kuna, regex, GDB, and Rizin keep the deadline or heap accepted when the work started, and reattributed resource errors copy the structured limit.
2026-11-11 20:16:24 +08:00
Cursor Agent 88202cbf67 fix(settings): keep invocation recovery on the launch seed
A one-shot CLI failure tells the caller to set the launch environment for the next REA process. update_analysis_settings stays on the continuing session. Reused JavaScript workers also keep the limit source that selected them.
2026-11-11 19:48:33 +08:00
RRFZ 769d92025d fix(ida): report the regex syntax error for invalid search patterns (#9544)
IDA checks a regex search pattern before it starts the provider. That early
check returned a generic "Supply a valid regular expression." issue, so IDA
callers never saw the parser explanation or the literal-mode recovery that
the shared regex worker gives Kuna and Hopper callers.

Build both refusals with one helper in RegexMatcher.
2026-11-09 21:46:25 +08:00
morlutoandCursor Agent 63b66fa498 fix(search): clarify regex diagnostics and recovery (#8776)
* fix(ghidra): identify invalid regex patterns

* docs(native): clarify regex dialects in search contracts

* fix(ghidra): guide regex syntax recovery

* fix(search): guide regex worker recovery

* fix(search): preserve regex parser diagnostics

* test(search): update regex boundary expectations

* refactor(search): remove unused regex error hook

---------

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
2026-11-05 00:20:01 +08:00
Kaoru0822andClaude Opus 5.5 85013da0ce fix(cli): describe one-shot timeouts for an invocation whose session has ended (#8535)
* fix(cli): describe one-shot timeouts for an invocation whose session has ended

A one-shot CLI analysis that reached a provider deadline told its caller
that the Ghidra session remained usable and reported a runtime-editable
limit applying to the next operation, although the command had already
released its provider session and runtime.

The shared error projection now takes an explicit caller lifetime.
Providers keep guidance that holds only for a continuing caller (session
reuse, same-session runtime updates) apart from the request outcome, and
the presentation adds it only for a continuing caller. One-shot owners
(runDirectAnalysis, runProviderAnalysis, finishAnalysisCommand and the
JavaScript application command) project for the invocation: details.limit
reports scope rea-invocation, applies_at next_invocation and the launch
environment seed, and the remediation leads with that setting for a new
invocation. MCP output keeps its runtime-update and same-session guidance.

Covers the Ghidra decompile timeout, decompiler failure, regex stack
exhaustion and startup timeout, the shared regex deadline, the Kuna
decompile timeout and the Hopper startup timeout.

Fixes #8311

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): project composed child failures for the caller lifetime

Cleanup composition embedded its primary and cleanup failures as
continuing-caller projections, and baked the primary's message and the
cleanup's remediation into the composed error. A one-shot command whose
Ghidra startup timed out while shutdown also failed therefore still
reported a rea-runtime limit and update_analysis_settings in
details.diagnostics.primary_error.

childFailureDiagnostics now snapshots each embedded child at composition
for both lifetimes when its projection depends on the caller, so cleanup
history keeps its composition-time state and the final projection selects
the caller's form. composedCallerGuidance re-attributes message and
remediation with their continuing-only parts kept separate. Error copies
and redaction keep the invocation diagnostics. The Hopper startup timeout
now carries its continuing guidance on the error like the other producers.

Invocation limits keep agent_editable and rea_restart_required, with
values that hold for a new invocation, so only scope and applies_at
change and environment is added.

In existing-project mode a decompile timeout or a cancelled session now
says the next session copies and opens REA_GHIDRA_PROJECT_PATH again
rather than repeating import and analysis.

Tests compare delivered guidance with the owning formatters and constants
instead of freezing prose.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 08:57:32 -08:00
Kaoru0822andClaude Opus 5.5 5a22ae6bc8 fix(mcp)!: return a compact binary_session status by default (#7127)
* fix(mcp)!: return a compact binary_session status by default

binary_session {} with no target open returned about 66 KB, most of it
provider rejection diagnostics and candidate capability sets that the
skill's recovery flow re-reads on every retry. 6.8.0 grew it by 21%
because the shared regex capability limitation began repeating setting
bounds and step-by-step recovery for every search operation of every
provider (#6099, #6267, #6301, #7049) and IDA gained that limitation for
its two search operations (#4862).

The regex limitation now states the effective deadline and heap, their
sources and where to change them; the deadline and heap errors keep the
full recovery. binary_session gains detail: summary (default) or
complete. The summary keeps open state, target identity, the binding,
route capabilities, run, activity and health status, each candidate's
availability and target-support status, code and reason, and every
tool's availability, reason, remediation and modes, and lists the
fields it leaves out in omitted_fields. Complete detail returns the
previous shape. The CLI capabilities and providers commands keep
complete provider facts through the same application projection.

BREAKING CHANGE: binary_session {} no longer returns
analysis_provider_candidates[].availability.diagnostics,
target_support.diagnostics or capabilities, or tool_availability group
surface, effects and annotations. Pass {"detail": "complete"} to get
them.

Fixes #7109

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(mcp): key binary_session output fields by detail

The output schema accepted detail: "complete" with summary candidates or
tool groups, and a summary without omitted_fields, so detail did not
tell callers which fields existed. Each session kind is now crossed
with a detail-specific shape: a summary requires omitted_fields and
summary-only candidates and tool groups; complete requires diagnostics,
candidate capabilities and static tool flags and forbids omitted_fields.
Both the canonical schema and the SDK-validated advertised schema reject
mismatched shapes.

The verifier helper accepts summary candidates only for a validated MCP
summary; CLI provider output still requires candidate capabilities.
Regex limitation tests check values, sources and setting names instead
of whole sentences.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 05:29:03 -07:00
morluto f3ed1657f8 feat(mcp): support runtime analysis limit recovery (#7049)
* feat(mcp): support runtime analysis limit recovery

* refactor(config): remove unused limit re-exports

* fix(android): keep fixture release metadata dependency-free

* fix(settings): preserve provider budgets and recovery facts

* fix(tests): resolve lint plugins from their repository owner

* refactor(mcp): verify guidance delivery without frozen wording

* fix(android): align availability with runtime timeout

* test(recovery): assert limit facts instead of frozen wording

* fix(mcp): share runtime settings with the default JADX provider

* test(mcp): bound acknowledgements and release held work on failure

* fix(catalog): declare runtime settings tools as MCP-only
2026-10-25 09:45:26 +08:00
Vinícius Andrade 689f738c95 fix(process): preserve the caller abort reason in regex worker cancellations (#6959)
* fix(process): preserve the caller abort reason in regex worker cancellations

Both cancellation outcomes of matchRegexValues, the pre-admission refusal
and the abort observed while the worker runs, now carry the caller's
signal.reason as the error cause. Hopper's regex search returns that result
unchanged, so cancelled regex search_procedures and search_strings results
regain the exact reason the caller supplied.

* test(process): assert the caller abort reason for cancelled regex matches

Cover the pre-cancelled refusal and an abort raised while the worker is
running, asserting the cause is the identical reason object.
2026-10-24 16:10:07 +08:00
9512a80804 feat(process): make the regex worker heap request configurable (#6301)
* feat(process): make the regex worker heap request configurable

REA_REGEX_WORKER_HEAP_REQUEST_MIB keeps the 128 MiB default and refuses
values outside 8 to 16384 MiB. A positive Node --max-old-space-size still
overrides the request and is not clamped by the setting.

Co-authored-by: morluto <morluto@users.noreply.github.com>

* fix(process): set the regex worker heap floor to the measured startup bound

On Node 22.23.4 a 5 MiB old-generation request aborts the regex worker
during startup, and 6 MiB starts it and returns a match. The setting floor
is that measured bound.

Co-authored-by: morluto <morluto@users.noreply.github.com>

* fix(process): raise the regex worker heap floor to 7 MiB

6 MiB passes configuration but returns ERR_WORKER_OUT_OF_MEMORY for a
trivial match on supported Linux Node 24 and Node 26.0.0. 7 MiB returned
that match on the measured 22, 24, and 26 lines. A clean-process test
runs the production worker at the floor.

Co-authored-by: morluto <morluto@users.noreply.github.com>

---------

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: morluto <morluto@users.noreply.github.com>
2026-10-22 23:43:13 +08:00
Abel YagubyanandAbelo9996 690a63abd6 fix(process): name the pattern field in default invalid-regex errors (#6270)
Co-authored-by: Abelo9996 <Abelo9996@users.noreply.github.com>
2026-10-22 17:48:12 +08:00
c7efd3a388 feat(config): make the regex matching deadline configurable (#6267)
* feat(config): make the regex matching deadline configurable

REA_REGEX_MATCHING_DEADLINE_MS defaults to 5000 ms and refuses values
outside 1..2147483647. Recovery and capability text name the effective
deadline, its source, and how to change the setting.

Co-authored-by: morluto <morluto@users.noreply.github.com>

* fix(setup): preserve the regex matching deadline in registrations

Setup validated REA_REGEX_MATCHING_DEADLINE_MS but left it out of the
selected registration environment, so a caller override never reached
the launched server and matching fell back to 5000 ms.

Co-authored-by: morluto <morluto@users.noreply.github.com>

* test(config): restore a stubbed regex matching deadline on failure

Kuna deadline assertions now unstub the environment in finally, so a
thrown construction or expectation cannot leave the setting stubbed.

Co-authored-by: morluto <morluto@users.noreply.github.com>

---------

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: morluto <morluto@users.noreply.github.com>
2026-10-22 17:10:51 +08:00
郭立 Guo Li 7590b50801 perf(schema): reduce retained integer validator allocations (#4360)
Construct integer formats directly while preserving bounds, refinements, metadata and current shared schema owners. Keep Incur-dependent CLI numeric coercion declarations unchanged.

Verify canonical advertisements, 126 numeric boundary cases, 974 actual CLI parser cases, broad source tests and real public-artifact SDK workflows. Record 72 normal tasks and 12 separate owned-inspector heap diagnostics with whole-family resource bounds; distinguish SDK spans and asymmetric audit overhead. Generate numerical report sections from receipts and reject stale tables through documentation conformance checks.

Closes #6236. Current-head CI and Greptile pass; actionable review findings are addressed. Codex review was unavailable due repository usage limits.
2026-10-22 05:11:08 +00:00
8413ec08f7 fix(process): report the effective regex heap and uncertain signal retry (#6099)
* fix(process): report the effective regex worker heap

Node gives --max-old-space-size, including NODE_OPTIONS, precedence over
the worker's 128 MiB resourceLimits request. Name that effective
old-generation heap and stop saying the request has no runtime override.
The matching deadline stays a fixed cap.

Co-authored-by: morluto <morluto@users.noreply.github.com>

* fix(process): keep SIGXCPU and SIGXFSZ retries uncertain

The signal does not prove the retained rlimit was exhausted, so an
unchanged retry may succeed. Project that retry as possible instead of
saying it fails the same way.

Co-authored-by: morluto <morluto@users.noreply.github.com>

* fix(process): leave percentage heap overrides unestablished

--max-old-space-size-percentage takes precedence over the absolute flag
in either order. Node computes that MiB from startup memory, which a
later read does not recover, so the effective heap stays unknown instead
of the 128 MiB request or an absolute flag.

Co-authored-by: morluto <morluto@users.noreply.github.com>

* fix(process): read launch NODE_OPTIONS, not process.env

A preload can rewrite process.env.NODE_OPTIONS after V8 has applied the
original flags, and those flags are not copied into execArgv. Use the
initial environment block when it can be read, and leave the effective
heap unestablished when that provenance cannot be recovered.

Co-authored-by: morluto <morluto@users.noreply.github.com>

* fix(process): leave env-file heap overrides unestablished

--env-file and --env-file-if-exists can supply NODE_OPTIONS when that
variable was absent from the initial environment. The file is not in
/proc/self/environ, so a missing entry is not the 128 MiB request.
An initial NODE_OPTIONS is still parsed, because Node does not let the
file replace it.

Co-authored-by: morluto <morluto@users.noreply.github.com>

* fix(process): leave --max-heap-size old generation unestablished

A positive --max-heap-size or --max_heap_size sets the total heap, not the
old generation, and can stay below the 128 MiB worker request when an
old-space flag is also present. The effective old generation stays
unestablished while that value is in effect. Zero or empty clears it.

Co-authored-by: morluto <morluto@users.noreply.github.com>

* fix(process): leave config-file heap options unestablished

--experimental-config-file and --experimental-default-config-file can
apply a heap percentage from a file that is not launch provenance. The
effective old generation stays unestablished when either flag is present,
including beside an absolute --max-old-space-size.

Co-authored-by: morluto <morluto@users.noreply.github.com>

* fix(process): read launch exec argv from the command line

process.execArgv can be cleared after V8 applies --max-old-space-size.
Linux recovers those tokens from /proc/self/cmdline and leaves the heap
unestablished when that vector cannot be separated from the program entry.
Heap probes compare pinned absolute limits instead of a percentage of host memory.

Co-authored-by: morluto <morluto@users.noreply.github.com>

* fix(process): leave a title-overwritten command line unestablished

process.title and --title replace /proc/self/cmdline with the title.
A buffer without a program entry is not an empty option list, so the
heap stays unknown instead of the 128 MiB request. The command-line
probe does not read /proc off Linux.

Co-authored-by: morluto <morluto@users.noreply.github.com>

---------

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: morluto <morluto@users.noreply.github.com>
2026-10-22 07:40:14 +08:00
d8a9673fc4 fix(process): name the Swift compile deadline (#6071)
Name REA_SWIFTC_COMPILE_TIMEOUT_MS, its effective milliseconds, the
1..2147483647 range, and the omitted 120000 ms default when a Darwin
ownership-helper compile times out. A change applies after REA restarts,
on the next ownership-helper compile.

Producer SIGXCPU and SIGXFSZ recovery says REA retains the tighter
inherited limit. Agent-visible fixed caps in this theme say this release
has no runtime override. Numbers are unchanged.

Refs #5910

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: morluto <morluto@users.noreply.github.com>
2026-10-21 23:46:29 +08:00
c1fd496e6a feat(kuna): serve procedures, pseudocode and assembly from Kuna exports (#3854)
* feat(kuna): serve procedures, pseudocode and assembly from Kuna exports

Register Kuna as a bring-your-own deep-analysis provider. It answers
list_documents, list_procedures, search_procedures, procedure_address,
address_name, procedure_pseudo_code, procedure_assembly and
analyze_function (and batch_decompile through composition) from the
verified project export. While a cold export builds in the background,
pseudocode comes from a single-function `kuna decompile` run on a private
copy and says so; assembly and data names wait for the export.

Each answer records its source and file span in raw_result, limitations
are scoped per operation, and the session-owned export is stopped on
close unless another session still waits for it. The literal/regex
procedure search predicate moves from the IDA runner into a shared
domain helper. `npm run verify:kuna` adds a real-provider lane with an
optional Ghidra comparison.

Refs #1957

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(kuna): refuse a Ghidra comparison without caller-built targets

Refs #1957

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(kuna): retry owned cleanup and keep answers bound to the opened Kuna

- Re-verify the Kuna executable's digest before every launch (memoized by
  file identity), so no answer names one build while another produced it.
- Keep the process supervisor of an unproven stop, and retry it on every
  later close in both the session and the cache; a failed close keeps
  failing until the stop is proven instead of reporting success.
- Report an abandoned export's retained cleanup from session close.
- Forget and rebuild an adopted export whose files another REA process
  evicted, instead of failing every later read.
- Close a private copy whose setup failed, and retry failed removals.
- Let the session own the shared quick inventory; each caller only stops
  waiting when it cancels.
- Report a failed export as `failed` with its reason.
- Lane: release the MCP client when open_binary rejects a target, and accept
  either valid source for the first answer.

Refs #1957

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(kuna): drain session requests before releasing workspaces

Combine caller cancellation with session shutdown and wait for active reads before releasing their process supervisors or private inputs. Retain unproven cleanup for later close attempts. Measure UTF-8 reply bytes without implying model token usage.

Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com>
Co-authored-by: Kaoru0822 <208281322+kaoru0822-kitauji@users.noreply.github.com>

* perf(kuna): keep document metadata reads free of target analysis

Listing the selected path no longer initializes the project cache or starts an export that the request never consumes.

Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com>
Co-authored-by: Kaoru0822 <208281322+kaoru0822-kitauji@users.noreply.github.com>

* fix(kuna): reject verification matrices with missing functions

Validate requested matrix coverage before building the fixture or opening providers. Empty matrices, unmatched names and partially matched function sets must fail instead of reporting an unperformed comparison as successful.

Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com>
Co-authored-by: Kaoru0822 <208281322+kaoru0822-kitauji@users.noreply.github.com>

* fix(kuna): retain component provenance in function dossiers

Record each source facet as one file span and preserve both pseudocode and assembly digests/ranges in combined reports. Keep direct text source fields compatible and verify every combined span through the real MCP lane.

Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com>
Co-authored-by: Kaoru0822 <208281322+kaoru0822-kitauji@users.noreply.github.com>

* fix(kuna): keep retired file cleanup bound to its export

Retain the export key with each failed file removal so a cancelled session reports and retries its own stopped resources. Preserve that association across sweeping and process-cleanup recovery without attributing unrelated cache failures to the session.

Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com>
Co-authored-by: Kaoru0822 <208281322+kaoru0822-kitauji@users.noreply.github.com>

* docs(kuna): document the Kuna provider and list it in the catalog (#3855)

* docs(kuna): document the Kuna provider and list it in the catalog

Add the Kuna provider guide (configuration, answered tools, cold and warm
paths, provenance, cache ownership, verification lane), link it from the
README and its translations, the CLI, installation and index pages and the
site navigation, describe `npm run verify:kuna` in the testing guide, credit
Kuna in THIRD_PARTY_NOTICES, teach the agent skill when to select Kuna, and
register its identity and operations in the generated product catalog.

Refs #1957

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* docs(kuna): state the Linux cache fallback, raw_result scope and comparison inputs

Refs #1957

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* docs(kuna): note that cache pins hold within one REA process

Refs #1957

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* docs(kuna): describe retired staging and retried cleanup

Refs #1957

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* fix(kuna): supervise regex and bind reads to one export

Share a cancellable ECMAScript matching worker with Hopper while preserving its error contract. Bind C and assembly indexes to immutable project readers, retry whole dossiers after eviction, and enforce the existing buffered-text capacity before allocating cached spans. Document the verified Linux scope and keep complete exports accessible.

Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com>
Co-authored-by: Kaoru0822 <208281322+kaoru0822-kitauji@users.noreply.github.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: N0zoM1z0 <161784452+N0zoM1z0@users.noreply.github.com>
Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com>
2026-10-15 00:53:26 -07:00