Commit Graph
12 Commits
Author SHA1 Message Date
bartman081523andmorluto d380dc2409 feat(uefi): add pure-TypeScript UEFI firmware analysis tools (#12342)
* feat(uefi): add pure-TS UEFI firmware volume/FFS parser with inspect/extract tools

Add a dependency-free rea-uefi provider that maps AMI/Aptio flash images:
- inspect_uefi_firmware: aligned _FVH discovery, volume-relative FFS walking,
  guided section/compression classification, conservative PSP-directory probing,
  embedded-volume rescan and leftover-region classification; incremental SHA-256
  and explicit integrity notes.
- extract_uefi_firmware: whole-image/volume/FFS-file/section extraction with
  LZMA-custom/LZMAF86 and AMD-zlib decoding, SafeOutputTree staging, derivations
  and extraction_gaps.
- UefiArtifactReader + 'uefi' format wiring across inventory/domain/contracts
  so parsed volumes and extracted PE32/TE files hand off to deep-provider
  analysis (open_binary -> Ghidra).

* feat(uefi): add inspect_uefi_nvram for AMI NVRAM variable stores

Add a pure-TypeScript tool that maps the vendor AMI NVRAM variable stores
(factory-default "StdDefaults" and peers) inside a flash image:
- scan the raw image for NVAR entry chains ("NVAR" + u16 total size +
  u32 attribute 0x8[23]FFFFFF + state + NUL-terminated name + data),
- recurse into a container entry whose data is itself an NVAR chain, so the
  StdDefaults setup variables surface as depth/parent_offset rows,
- report attributes, state, data range, SHA-256 and trailing padding per entry.

Verified against B550 AORUS Elite V2 FId: one StdDefaults store at 0x37090 with
the 11 expected nested variables (Setup, PlatformLang, AMITSESetup, XhciDID,
GcSensorVarName, PCI_COMMON, SioSetupData, UsbSupport, NetworkStackVar,
SecureBootSetup, Setup). Exposed as MCP tool and inspect-uefi-nvram CLI command.

* fix(uefi): address review on checksums, compression, guided sections, NVRAM bounds

- FFS file checksum: verify the two's-complement invariant (payload sum +
  stored byte == 0 mod 256) instead of comparing sums, and encode the correct
  complement in the fixture builder.
- Compression sections (type 0x01): use the 9-byte header and classify EFI
  standard compression instead of 'none', so extraction reports a gap rather
  than publishing compressed bytes as a raw section.
- GUID-defined sections: derive GUID/data-offset/attributes from the parsed
  common header size (compact or extended) and reject out-of-range payload
  offsets.
- AMI NVRAM: bound recursive chains to the enclosing container's data end and
  report partial coverage when a valid nested chain is cut by max_depth.

* fix(uefi): bound decode memory, serialize operations, enforce deadline, mark truncation

- LZMA worker: enforce max_output_bytes while decoding through a bounded output
  sink, so an oversized stream is rejected during expansion instead of after a
  full decompression plus a second Buffer copy.
- Provider: serialize admitted operations (the promised single decode-worker
  lane must not become one worker per overlapping call) and apply one
  whole-request deadline that covers every decode stage, not a fresh per-stream
  timer. close() drains the queue and the resource scope.
- Scan: track truncated sections of known type and report coverage partial
  instead of complete when a section declares more bytes than are present.

* fix(uefi): cancellable queue, timeout surfacing, availability and reader omissions

- Queue: check the caller signal before enqueue and when a job reaches the head,
  and race the queued promise against abort so a cancelled wait returns
  immediately instead of blocking behind the active request.
- Deadline: track the internal deadline and return AnalysisTimeoutError instead
  of the AnalysisCancelledError that runOwnedCommand reports for any external
  abort, preserving the real failure reason for CLI/MCP callers.
- CapabilityInventory: treat inspect_uefi_nvram like the other bundled rea-uefi
  tools so discovery does not demand Unblob for it.
- UefiArtifactReader: report image truncation through onOmission so inventory
  coverage reflects the unread suffix even when no volume was found.

* fix(uefi): limit early cancellation to unstarted jobs and preserve timeout cleanup

- #raceWithAbort only returns early for jobs that have not started; once a
  request is running, await it so worker cleanup and completed output are
  preserved instead of being discarded by a bare cancellation.
- Reclassify a deadline-induced cancellation as AnalysisTimeoutError while
  keeping its cause and cleanup observations, and never override a different
  primary failure.

* docs(licenses): record UEFI decoder dependency notices

* fix(uefi): preserve stream provenance and bound firmware analysis

* feat(uefi): decode LZMAF86 guided sections

* fix(uefi): validate publication before commit and order decoder cleanup

* fix(uefi): preserve unsupported volumes and extraction gaps

---------

Co-authored-by: morluto <76467478+morluto@users.noreply.github.com>
2026-11-19 21:19:35 +00:00
morluto 10309f9c69 refactor(targets): share the resolved target format vocabulary (#12165)
* refactor(targets): share the resolved target format vocabulary

* test(targets): verify each format kind at compile time

* refactor(targets): share Evidence and explicit format vocabulary (#12168)
2026-11-19 03:54:56 +00:00
Matt Van Horn 51459cf203 feat(artifacts): inventory Android OTA update payloads offline (#11378) 2026-11-17 09:01:23 -05:00
Matt Van Hornandgensokyo-dev a88c0a5554 feat(artifacts): inspect Android boot image components
Inventory Android boot and vendor_boot images through shared artifact workflows. Preserve parser failure kinds and bounded stored-component extraction.

Assisted-by: Suika (gensokyo-skills:suika-scatter-gather-planning)
Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com>
2026-11-17 12:08:42 +00:00
morluto ff0176256a feat(snapshots)!: persist the target identity as the snapshot target (#11551)
* feat(snapshots)!: persist the target identity as the snapshot target

The snapshot target is now `{ kind, identity }`, where `identity` is the
FileTargetIdentity that `binaryTargetIdentity` produces and `kind` is the
binary kind query IDs commit to. The per-format target projection and
`snapshotTargetIdentity` are deleted; the schema checks the format's
selection, architecture and kind instead of keeping one union arm per format.

Entry execution subjects use the Evidence subject shape (file or explicit
unknown), so a snapshot entry commits to the same identity, including the
selection, as its Evidence record. Workflow entries take the subject of the
workflow's own Evidence. Replay no longer re-derives the selection from the
open target.

`FileTargetSelection` gains `universal-slice` (`offset`, `size`, and the FAT
`cpu_type`/`cpu_subtype` when target admission supplied the FAT table, else
null). `binaryTargetIdentity` produces it for `mach-o-universal` targets, so
Evidence and snapshots for different slices of one container no longer share
an identity.

Refs #11417

BREAKING CHANGE: analysis snapshot files change shape: `target` is
`{ kind, identity: { kind: "file", sha256, format, architecture, selection } }`
and entry `execution.subject` is the Evidence subject
(`{ identity, name, local_path }`, never null). Snapshot binding mismatch
details report `target.snapshot`/`target.selected` in the same shape. Evidence
IDs of universal Mach-O targets change because their subject identity now
carries the selected slice. Recreate saved snapshots and Evidence bundles of
universal Mach-O targets.

* docs(evidence): name the universal Mach-O slice selection in the subject contract

* fix(snapshots): read the snapshot target identity in the Ghidra verification scripts

The real Ghidra snapshot checks (lifecycle, RISC-V, MIPS, PowerPC) read
snapshot.target.sha256 and .architecture, which moved under
snapshot.target.identity, so they would fail after saving a valid snapshot.

* feat(evidence)!: name live browser page Evidence by its page URL (#11559)

Browser page observations (inspect_web_page, analyze_web_bundle,
observe_web_session, discover_webmcp_tools, capture_web_screenshot,
observe_web_execution, inspect_web_event_listeners) named an unknown
(`not-observed`) subject although the provider reports the page URL.

`TargetIdentity` gains a `url` kind: the reported URL with userinfo removed
and its origin (`null` for an opaque origin). The schema refuses a URL that
carries userinfo or an origin the URL does not have.
`browserUrlTargetIdentity` in the browser URL owner builds it from the
provider's reported URL; a withheld or unparseable URL stays unknown
(`not-observed`). Target lists and comparisons still name no single
document. Analysis views keep their parent's URL subject, as they already
keep a file subject.

BREAKING CHANGE: Evidence IDs of live browser page observations and their
analysis views change, and their subject is
`{ "kind": "url", "url", "origin" }` with `name` and `local_path` null.
Recreate stored Evidence for these tools. This lands inside Evidence format
revision 2 under the release hold (#11417); no `evidence_format` bump.
2026-11-16 07:04:34 +08:00
morluto 1f24b3fa57 feat(evidence)!: name the Evidence subject by its target identity (format revision 2) (#11416)
* feat(evidence)!: name the Evidence subject by its target identity (format revision 2)

The Evidence subject carries subject.identity (kind, sha256, format,
architecture, selection) and the Evidence ID commits to it, so raw/DOL
entry points and ESP flash offsets of the same bytes are different
subjects. Every record declares evidence_format: 2; revision 1 bundles,
standalone records and snapshots are refused with the recreate guidance.
binaryTargetIdentity is the one projection of an open target, used by
Evidence and snapshot comparison.

BREAKING CHANGE: Evidence format revision 2. Evidence IDs commit to the
subject's target identity (subject.identity, including the raw/DOL entry
point or ESP flash offsets), and every record declares evidence_format: 2.
Evidence bundles, records and analysis snapshots from earlier releases are
refused; recreate the observations with this release.

* refactor(analysis-view): read parent subjects through the Evidence identity accessors (#11423)

Analysis views compare their parent's file identity (evidenceFileTarget)
and take path and digest from evidenceSubjectTarget instead of reading
the subject's digest, format and architecture members, which duplicate
subject.identity until they are removed. A counted guard
(evidence-subject-declaration-read) keeps new direct reads out and
records the 20 remaining files.

* fix(evidence): carry format refusals through Evidence readers and bind target selections

- safeParseEvidence/safeParseImmutableEvidence return the format refusal as
  an expected failure; every consumer maps it to the one integrity refusal
  with the recreate guidance. An unmarked object is an earlier record only
  when it has every member records have always carried.
- ArtifactProvider inventory roots and provider subjects that name the
  target's own bytes carry the target's selection (ESP flash offsets).
- Snapshot rows bind only Evidence whose identity, selection included,
  matches the snapshot target.
- Entry-point selections use the raw-binary entry point form.

* fix(evidence): refuse unauthenticated or earlier-format records instead of reading them as absent

- recognizeEvidence (evidenceValidation) replaces tryParseEvidence: input
  without an evidence_id is not Evidence (ok(undefined)); a record that names
  one but fails authentication or is from another format revision is an
  EvidenceIntegrityError carrying the recreate guidance, never undefined.
- Direct analysis retains that refusal as a secondary failure instead of
  silently skipping source capture; cleanup projection, source-closure
  annotation and the flutter, debugger and release-exposure recoveries use
  the same owner (the last three previously read the unauthenticated schema).
- A desktop capture.json from an earlier format is refused with the recreate
  guidance instead of "not desktop application capture Evidence".

* fix(evidence): advertise revision 2 ledger examples and rank delivery omissions by serialized size

- The obligation ledger and reconstruction coverage examples named
  evidence_format 1, which revision 2 refuses; they now use
  EVIDENCE_FORMAT_REVISION.
- MCP delivery chose which unretained recovery to omit by a parsed-storage
  lower bound clipped at the response budget. Once revision 2 subjects made
  the source record's estimate cross the budget, both candidates tied at the
  clip and the smaller source was omitted ahead of the larger completed
  observation. Candidates are now ranked by serialized size, which is what
  the budget counts.

* refactor(native): compare function snapshots by their Evidence target identity (#11450)

Function snapshots carry the subject's file target identity instead of the
duplicated subject declaration. Call paths and function comparisons compare
targets through sameTargetIdentity, so the same bytes opened at a different
raw entry point or ESP flash offset no longer count as one coordinate space:
build_call_path refuses the mix, and compare_functions no longer matches
entries by address across selections. Structural candidates and native
function matching read the architecture and digest through
evidenceFileTarget.

Refs #11417

* refactor(artifacts): compare artifact and WASM summaries by their Evidence target identity (#11461)

Artifact comparison authenticates a summary against its retained inventory
through sameTargetIdentity and rebinds the alias with the whole target,
selection included, so a flash-selected inventory summary taken under an
alias path is no longer refused. WASM comparison, the analysis view
artifact projection and the inventory root check read the digest, format
and display path through the Evidence identity accessors.

Refs #11417

* refactor(evidence): read record subjects through the identity accessors in JS, managed, ledger and bundle readers (#11470)

JavaScript application graphs, runtime reconciliation, managed inspection
and native verification sources, the record summary filter, the ledger's
residual-unknown target and bundle scope selection read the subject digest,
format and display path through evidenceFileTarget and
evidenceSubjectDisplay. No comparison changes: each reader matches one
record's facts against its own payload or a caller filter.

Refs #11417

* refactor(evidence)!: name the Evidence subject only by its target identity (#11497)

* refactor(evidence)!: name the Evidence subject only by its target identity

The subject keeps `identity` and the display facts `name` and `local_path`.
The duplicated `digest`, `format` and `architecture` members are removed; the
format-owned declaration now validates the identity itself. Readers the type
checker found move to the owner accessors; untyped reads in verify scripts,
the efficiency harness and test matchers move to `subject.identity`. The
`evidence-subject-declaration-read` text guard and its baseline are deleted.

Fixes #11473
Refs #11417

BREAKING CHANGE: the Evidence subject no longer has `digest`, `format` or
`architecture`; read `subject.identity.sha256`, `subject.identity.format` and
`subject.identity.architecture`. A record that still carries them is refused.

* test(evidence): give the Flutter verifier fixture the identity subject and check the DOL declaration without the ID

* test(evidence): drop the removed subject members from the declaration matrix and tamper fixtures

* feat(evidence)!: give every Evidence record an explicit subject identity (#11536)

* feat(evidence)!: give every Evidence record an explicit subject identity

A producer that cannot name a file passes an `unknown` target identity
with a closed reason (derived-from-linked-evidence, not-observed,
unsupported-subject) instead of no subject. The subject is non-null;
unknown subjects have no display facts. The generic missing-subject
limitation and `subjectUnavailableReason` are removed; producer-specific
explanations are ordinary limitations. Comparison identity requires the
derived unknown, and null-subject consumers ask the owner accessors.

Refs #11417

BREAKING CHANGE: every Evidence record has a subject. A record without a
file target names `subject.identity` `{ "kind": "unknown", "reason": … }`
with `name` and `local_path` null, instead of `subject: null` and the
limitation "Artifact identity is unavailable for this observation.".
Their Evidence IDs change.

* fix(evidence): name explicit unknown subjects in JavaScript callers and keep a managed graph's file subject

The verification scripts are not type-checked, so five createEvidence
callers still passed undefined (or a missing first target) after the subject
became required. They now pass unknownTarget("not-observed").

A managed application graph chose the first present input subject. Every
subject is now present, so an unknown artifact subject hid a file subject on
the member or boundary Evidence. The graph now takes the first input subject
that names a file.

* test(evidence): assert the subject kind instead of a presence the type now guarantees

Every Evidence record has a subject after this change, so test guards and
assertions that checked it for null always passed. Each now checks that the
fixture subject names a file, or is removed where a later fileIdentity,
fileSubjectTarget or fileSubjectDisplay call already requires that. Non-null
assertions on Evidence subjects are removed; analysis-view inputs, whose
subject is optional, keep an undefined check.

* test(evidence): expect the Evidence subject format under its identity

Two boundary tests still matched subject.format, which slice 2e moved into
subject.identity. toMatchObject is not type-checked against the Evidence
shape, so they failed only when run (the signature test on macOS).
2026-11-16 06:28:01 +08:00
N0zoM1z0andgensokyo-dev da1f029c2f fix(artifacts): admit MFT captures through CLI and MCP
Co-authored-by: gensokyo-dev <342580529+gensokyo-dev@users.noreply.github.com>
2026-11-11 10:03:35 +08:00
5990ff0324 feat(artifacts): read WeChat mini-program wxapkg containers (#8148)
* feat(artifacts): read WeChat mini-program wxapkg containers

Add a read-only reader for plaintext wxapkg packages: the 0xBE/0xED
18-byte big-endian header, the bounded name/offset/size member table,
and verbatim member bytes at absolute carrier offsets.

- Members retain declared names, absolute offsets and sizes, so
  source_location reports real carrier positions.
- V1MMWX PC-client packages are detected as encrypted coverage with
  null member facts; extraction refuses with a typed error and no
  decryption is attempted.
- Bounded table and directory budgets are admitted before allocation;
  malformed marks, truncated tables, invalid UTF-8 names, member
  extents inside the header or beyond the file, and counts that cannot
  fit their table are typed format or limit failures.
- Member reads stream in bounded 64 KiB chunks with carrier freshness
  checks; the reader joins outstanding streams before close and bounds
  active streams and repeated member I/O.

Refs #8121.

Generated with [Devin](https://devin.ai)

Co-Authored-By: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>

* fix(artifacts): bound wxapkg members to the declared data region

Normalize the two indexLength conventions before the table bounds check
and the table read. Member ranges must then lie in that declared data
region, which has to fit in the file.

Record wxapkg format metadata as not compared: header facts repeat the
package bytes, and entry source paths keep a producer root prefix.

* fix(artifacts): choose the wxapkg index after member ranges fit

Four trailing bytes made the rows-only layout end on the file and dropped
the count-inclusive layout. Keep every admitted layout until the parsed
rows and member ranges select one.

---------

Co-authored-by: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>
Co-authored-by: Cursor Agent <cursoragent@cursor.com>
2026-11-05 00:52:20 +08:00
Entrpiandmorluto b43c329df7 feat(artifacts): inventory and extract UF2 and DfuSe firmware containers (#8230)
* feat(artifacts): inventory and extract UF2 and DfuSe regions

open_binary refused UF2 and DfuSe firmware containers as an unsupported
format, so inspect_artifact and extract_artifact could not show which
bytes a drag-and-drop or DFU update writes at which addresses.

UF2 is recognized by a complete first block with all three magic
numbers. Valid main-flash payloads are joined into address-contiguous
regions per familyID, named family-0x<id>/0x<start>-0x<end>.bin, and
known IDs are named from a small table copied from Microsoft's
uf2families.json at a pinned commit. Numbering is counted per familyID
and block count: absent, repeated, out-of-order and out-of-range block
numbers are reported, and absent blocks leave coverage unknown.
Not-main-flash blocks are excluded and reported; file-container blocks
are reported and leave coverage unknown; invalid blocks and a partial
final block are excluded with their position. A rewrite of one address
with different bytes fails closed, naming both block spans.

DfuSe is recognized only by its prefix together with a DFU 1.1a suffix.
Each element becomes one region at its file range with its target's
alternate setting and name. Structural faults fail closed with a byte
offset; overlapping elements stay separate and are reported. A suffix
CRC mismatch follows integrity_policy: fail refuses with a dfu-crc32
integrity error, and record-and-continue records a root contradiction
that extraction also carries.

HEX, UF2 and DfuSe share one retained-region reader and one run
merger, so the HEX decoder and reader lose their private copies.

* docs(artifacts): document UF2 and DfuSe images and their esptool lane

Describe recognition, region names, metadata, numbering, failures, the
DfuSe suffix CRC under integrity_policy, and limits, and link the page
from the CLI and firmware guides and the agent skill reference.

npm run verify:uf2 runs esptool merge-bin --format uf2 on generated
inputs at known addresses, with and without MD5, with 256-byte
payloads, and on a concatenation of two chips' outputs. Inspection and
extraction through the built CLI must return every input at its address
under the familyID esptool itself reports.

* fix(artifacts): accept both DfuSe image size conventions

UM0391 calls DFUImageSize the file length, and dfu-util's dfuse-pack.py
writes that value, while ST's DfuFileMgr, MicroPython's dfu.py and pydfu
leave the 16-byte suffix out. The decoder accepted only the second form,
so it refused dfuse-pack.py output as malformed.

Accept either value and keep the declared one in image_size; any other
value still fails with the suffix offset and the file length. The tests
pin both producers' output for one image, CRC included, from their
build() functions transcribed and run under Python 3.

* fix(artifacts): keep reused UF2 block numbers from hiding missing blocks

esptool numbers every merged input from 0, so two inputs with the same
block count share one numbering group. A block lost from one input left
its number present in the other, and the file reported complete
coverage. Each block number now records the target addresses it was
seen at: equal address counts are complete copies, a resend to the same
address is one block, and unequal counts make coverage unknown with a
limitation and ambiguous_numbering_group_count. sequence_count becomes
numbering_group_count, and region block positions become
first_file_block and last_file_block.

Review follow-ups in the same change:
- compare_artifacts compares a DfuSe element's alternate setting and
  target name, so bytes moved to another device memory are changed;
- the shared reader keeps no region bytes outside its map after close;
- one domain type replaces four identical decoder failure types;
- the UF2 decoder returns a typed limit instead of throwing on bytes
  beyond its admitted size, and caps retained regions, not runs;
- DfuSe caps elements with bytes only, names empty elements and
  element-less targets, drops the constant bVersion and bcdDFU fields,
  and says whether the CRC matches when DFUImageSize fits neither
  convention;
- classification evidence carries a suffix only when the probe saw the
  end, and root classification reads the tail only for a DfuSe prefix;
- the UF2 domain region owns family_name, and the root records the
  family registry revision; the table's MIT notice is preserved;
- docs pin the producer revisions (dfu-util ee6b393d and f9a537c9,
  MicroPython cb99ca98), give the MD5 structure's real meaning, and
  describe container contradictions in the MCP contract guide;
- tests and the esptool lane add the equal-count inputs and a block
  lost from one of them, accepted boundaries beside each refusal, a
  DfuSe root larger than the classification prefix, and CLI refusals.

* feat(artifacts): name the UF2 families that LibreTiny builds for

LibreTiny writes UF2 for Realtek, Beken and Bouffalo Lab modules. The
Microsoft registry revision REA already cites (cf3bd7f9) lists eight of
those families: RTL8710A, RTL8710B, RTL8720C, RTL8720D, BK7231U, BK7231N,
BK7251 and BL602. Their regions now carry those names. LN882H, which
that revision omits, keeps its familyID with no name.

* fix(artifacts): count DfuSe declarations without bytes instead of listing them

Empty DfuSe elements have no entry, so DFUSE_MAX_ELEMENTS does not cap
them, and the target walk kept a description string for each one. At 8
bytes per element, a file under the 128 MiB ceiling can declare about
16.7 million of them. The walk now counts every declaration without bytes
and builds only the first NAMED_ELEMENTS descriptions, which is all that
the limitation shows. The limitation text and empty_element_count do not
change. The guide now says that both DfuSe limitations name the first four.

On this host, decoding 4,000,000 empty elements (a 32 MB file) ran out of
memory under a 128 MB V8 heap before this change, and it peaked at 1.59 GB
RSS with the default heap. It now decodes in 114 ms with a 220 MB peak.

---------

Co-authored-by: morluto <76467478+morluto@users.noreply.github.com>
2026-10-31 16:27:00 +08:00
22e5aa97af feat(artifacts): inspect classic iNES container regions (#2816)
* feat(artifacts): inspect classic iNES container regions

* fix(artifacts): preserve iNES source disappearance as integrity failure

* fix(artifacts): revalidate iNES source before parsing header

* fix(artifacts): validate admitted roots before classification

* fix(artifacts): normalize source loss during root hashing

* fix(artifacts): bind iNES extraction admission to inventory

* test(artifacts): clarify non-executing inspection wording

* fix: preserve binary plist detection with extended magic probe

* test(browser): wait for popup document loads before capture

* fix(artifacts): honor cancellation across source validation

* fix(artifacts): prefer artifact magic over implicit database suffix

* fix(artifacts): select extraction readers from scanned format

* fix(artifacts): complete prefix reads and share ZIP format admission

* fix(browser): budget scenario cleanup for content drain and shutdown

* test(artifacts): admit valid universal inputs before routing

* test(artifacts): verify iNES workflows on macOS

* test(ci): own iNES macOS coverage and portable fixture paths

* fix: preserve cleanup retries and avoid duplicate inventory parsing

* fix(contracts): share ZIP target formats across MCP lifecycle schemas

* fix(target): preserve typed cancellation during descriptor admission

* refactor(artifacts): use JSON-safe inventory producer output directly

* test(artifacts): share file read setup and satisfy CI checks

* fix(artifacts): classify changed admission as integrity failure

* ci: run Mach-O summary delivery coverage on macOS

* test(javascript): align parameter provenance with main contract

* test(browser): await discoverable fixture pages before runtime verification

* fix(artifacts): pass target metadata to format detection

* fix(artifacts): bind extraction to opened target

* fix: repair the static-check failures on the default branch (#2895)

* fix: repair the static-check failures on the default branch

The default branch fails its own required `Static checks` job three ways, so
every pull request reports that job as failed regardless of its own change.

- `npm run format:check` reports `src/domain/functionComparison.test.ts` and
  `src/ida/IdaOperationRunner.ts`.
- `npm run lint` reports a duplicate `import { join } from "node:path"` in
  `tests/boundary/mcp/ghidraInventoryMcp.test.ts` (lines 4 and 17).
- `npm run typecheck` reports `format: "devin"` missing from the client format
  union in `src/application/SupportedClients.ts`, and an unchecked index in
  `tests/boundary/cli/clientProfileLifecycle.test.ts`, whose pair array is
  inferred as `string[][]`.

Apply the pinned formatter, drop the duplicate import, list the `"devin"` format
that its own definition already uses, and mark the pair array `as const`.

Validation: `npm run check:fast` and `npm run format:check` pass.

* fix(setup): keep Devin on the JSON configuration dialect

---------

Co-authored-by: 吴佳浩 <wujiahao@supremind.com>
Co-authored-by: morluto <76467478+morluto@users.noreply.github.com>
(cherry picked from commit df3d96da80)

* fix(artifacts): bind session inventories to target identity

* test(browser): bound fixture readiness acknowledgements

---------

Co-authored-by: 64579525 <17373302683@163.com>
Co-authored-by: 吴佳浩Alben <35291372+XiaoBinGan@users.noreply.github.com>
Co-authored-by: 吴佳浩 <wujiahao@supremind.com>
2026-10-31 15:49:16 +08:00
Entrpi e6d0618979 feat(artifacts): inventory and extract ESP flash layouts (#8228)
* feat(artifacts): inventory and extract ESP32 firmware images

ESP32-family app and bootloader images (magic 0xE9) had no reader, so
open_binary refused OTA downloads, app partitions and bootloaders.

Add the esp-image container format behind inspect_artifact and
extract_artifact. A pure decoder reads each byte once and keeps only
fixed-size fields. Derived facts cover the chip, from a table cited to
ESP-IDF v6.1; segment classification as ESP-IDF's should_map and
should_load; checksum and appended SHA-256 results; app and bootloader
descriptors; Secure Boot v2 signature blocks, observed and unverified;
and undescribed trailing byte ranges. Truncation and undescribed bytes
make coverage unknown. ESP8266 images are refused with a specific
reason, and ciphertext stays unrecognized.

Add the format to every target, Evidence, snapshot, live-summary and
artifact vocabulary, document it, and add an optional verify:esp-images
lane that compares esptool-built images with esptool image-info and
espsecure signature-info-v2.

Refs #3615

* test(artifacts): run the ESP image lane on esptool v5.6.0

The lane compared descriptor fields only when esptool image-info printed
one, so a descriptor that REA reports and esptool does not print passed
without comparison. Compare the descriptor kind in both directions.

Record that the lane passed for all 13 images with esptool and espsecure
v5.6.0, the version the layout facts cite, as well as with 4.12.0.

* refactor(artifacts): define ESP image layout sizes once

The decoder and the derived facts each defined the segment-header,
appended-digest and flash-sector sizes, the erased-byte scan and the
offset formatter. Define them once with the other fixed-layout structures
and import them in both places. The signature slot count is the one
constant that drives the slot scan.

Correct the observedEnd comment: it is the end of the last chunk read.

* fix(artifacts): report ESP-IDF's segment length limit by chip

ESP-IDF's verify_segment_header rejects a segment of 16 MiB or more
unless the chip maps flash through 32-bit cache addresses
(SOC_SPI_MEM_SUPPORT_CACHE_32BIT_ADDR_MAP: ESP32-S3, P4, C5, C61, H4 and
S31 in v6.1). Record that capability in the chip table and add a
limitation for such segments; unknown chips get none.

`loaded` repeats should_load. It does not mean the bootloader accepts the
segment: verify_load_addresses still rejects one outside the chip's RAM,
which REA does not model. Say so in the docs, the skill reference and the
inventory limitation.

* test(artifacts): check ESP lane tools first and verify extraction

The lane started work before checking its tools, so a missing RISC-V
target, ld.lld, esptool or espsecure surfaced as a raw spawn or command
error. Check each one before building and name the variable to set. Warn
when esptool is not v5.6.0, the release the layout facts cite.

Assert each segment's class for the ESP32-C3 app, its variants and the
bootloader, as the Xtensa image already did. Extract the app and the
signed image through the CLI and compare every file with the bytes at
esptool's segment offsets or in the appended signature sector; the
source's SHA-256 must be unchanged and equal the reported root_sha256.

* docs(artifacts): state what the ESP image lane does not establish

The Verification section listed the lane's checks but not its gaps: only
ESP32-C3 and ESP32 images come from a real producer, no real project
build, OTA download or flash dump is inspected, no signature is verified,
and the lane does not run in CI.

Record the timing of the final lane run on esptool v5.6.0.

* fix(artifacts): compare ESP segment declarations

Segment entries hash only their data, so compare_artifacts reported a
segment that moved to another load address with the same bytes as
unchanged; only the image itself changed. Compare each segment's
load_addr and data_len as its declaration, as Node SEA and PyInstaller
members are compared, and count a changed declaration as a metadata
change, also when content is unavailable.

Header offsets are layout and the classification is derived, so neither
is compared.

* test(artifacts): run ESP lane commands as owned process trees

The lane ran its tools through execFile. A timeout killed only the direct
child, so a linker or assembler that Clang or GCC had started could keep
running while the lane removed its workspace. Run every command through
createVerifierCommands, check the tools inside withVerifierCleanup, and
remove the workspace only after commands.close() has stopped every tree;
a failed close keeps the workspace.

Only a nonzero exit now counts as a refusal or an expected esptool
failure; timeouts and spawn failures propagate. Supervising each command
roughly doubles the lane's run time.

* test(artifacts): cancel ESP decoding after its first decoded chunk

The cancellation test requested cancel or close on setImmediate, which
can land while the file is still being opened and checked, so it never
showed that decoding had started. It also passed against a reader that
ignored both requests while decoding. Acknowledge the decoder's first
chunk, then cancel or close, join the operation, and assert that no
later chunk reaches the decoder and that the reader ends closed.

* docs(artifacts): record which ESP metadata comparison ignores

Segments are compared by their declaration. The image's and the
signature blocks' format_metadata are not: every field comes from their
own bytes, which content comparison already covers, and a block's
image_digest_matches follows the image's content.

* feat(artifacts): inventory and extract ESP flash layouts

A whole-flash dump of an ESP32-family chip was read as its bootloader
image, with the partition table, apps and data left as undescribed bytes,
or refused when it began with erased flash. Read it as an esp-flash-image
container instead.

The partition table is decoded as esp_partition_table_verify accepts it
and is found at the caller's partition_table_offset, at the default
0x8000, or by scanning 0x1000-aligned sectors for a table whose MD5
verifies, which the inventory reports as derived. The bootloader is
located at its chip's ROM bootloader offset. Each partition is an entry
with its declaration in flat format_metadata; the bootloader and app
partitions carry ESP image facts from the existing streaming decoder; the
otadata records are reported with a selection derived without rollback or
anti-rollback, and the running partition stays unknown. One unreadable
partition does not hide the others, and extraction writes every partition,
nvs_keys included, as ordinary data.

Flash layouts are detected before single ESP images. The scan runs only
when an ESP image sits at a ROM bootloader offset, and is refused when a
bootloader at another chip's offset shows that the dump does not start at
flash address 0. open_binary gains flash_offset and partition_table_offset,
which require format esp-flash-image and are part of the snapshot target
identity; the CLI takes them with --target-format esp-flash-image.
Comparison treats a partition's label, type, subtype, range and flags as
its declaration.

* test(artifacts): verify ESP flash layouts with gen_esp32part, merge-bin and otatool

Add the optional verify:esp-flash lane. It builds default and relocated
partition tables with ESP-IDF's gen_esp32part.py, assembles dumps with
esptool merge-bin, including one written from flash 0x1000, and writes
OTA records with otatool through flash_file_tool.py, which replaces
parttool's esptool calls with reads and writes of the dump file.

It compares REA's bootloader and app facts with esptool image-info, every
partition with gen_esp32part.py's decoding of the extracted table, and the
OTA records and derived slot with otatool read_otadata after each switch.
It also checks extracted bytes and source integrity, the scan and caller
table offsets, flash_offset on the 0x1000 dump, a corrupted app beside
valid partitions and a truncated dump. ESP32 linker scripts place the
conformance bootloader and app in ESP32 address ranges.

* fix(artifacts): read ESP flash layouts as the bootloader does

Read the partition table as bootloader_utility_load_partition_table
does: the last factory, otadata and same-subtype OTA declaration wins,
and a limitation names repeats. Plan each otadata record within its
partition and the dump. An otadata partition smaller than two sectors
selects none, the bootloader's INVALID_INDEX; a record the dump lacks
leaves the selection unknown while the other record stays reported. The
fallbacks follow the bootloader's indexes: ota_0-fallback and
factory-fallback name no partition when the table declares none, and the
assumptions add GPIO holds and deep-sleep wake.

Refuse a dump whose bootloader contradicts its origin before the default
table offset is tried, whether flash_offset was omitted or given, and keep
the ESP image reader's ESP8266 refusal. A table never lies inside the
located bootloader image, so single app images are no longer scanned. An
explicit esp-flash-image selection is decided before other container
signatures, and the native commands' --target-format no longer takes it.
Say when no bootloader confirms the default origin.

Exempt the primary bootloader and partition_table entries of ESP-IDF 5.3
from placement limits, report every region inside a longer one, and name
partitions by index when labels repeat ignoring case. Keep an undecodable
label's bytes in label_hex and compare them. Word undescribed ranges as
starting at a byte that is not erased, and treat a short erased region as
erased.

Add an MCP compare_artifacts test for partition declarations, reader
identity and close tests, scan edge cases, the 0x2000 ROM offset and a
literal otatool CRC.

* test(artifacts): verify ESP primary layout entries and the otadata fallback

Build a table with the primary bootloader and partition_table entries
that gen_esp32part.py fills from --primary-bootloader-offset, and check
that REA reads it with complete coverage, no overlap or misplacement
limitation, and a table that agrees with gen_esp32part's decoding. Erase
the otadata with otatool after the slot switches and check the records
against read_otadata and the factory fallback.

* fix(artifacts): keep ESP flash coverage complete for a dump cut short

An esptool merge-bin dump ends after the last part it wrote, usually inside
its last partition. Such a partition made the layout's coverage unknown, so
artifact comparison of two merge-bin dumps reported every unchanged
partition as unknown.

The partition table names every partition whatever the file's length, so a
partition cut short or left out by the end of the file hides no entry. As
the ESP image reader does for a cut-short segment, its entry holds the bytes
the file has and an entry limitation gives the declared size; a partition
with no bytes stays in partitions_outside_dump. Coverage stays complete
unless undescribed bytes remain or no bootloader is located. An MCP
compare_artifacts test of two dumps that end inside ota_0 now classifies
every partition, and fails on the old rule.

* fix(artifacts): report written bytes in ESP partitions, erased slots included

An app slot is erased for ESP-IDF's bootloader when its image header bytes
are erased flash, and REA reported only that status. A slot can still hold
data further in: a dump read from a device held a complete older app image
1 MiB into an OTA slot reported as erased, with no limitation.

Each partition entry now records where the bytes the dump holds are
written, relative to the partition: written_offset, the first byte that is
not 0xFF, written_end, just past the last, and written_bytes, how many are
not 0xFF. They are null for a partition outside the dump. The status stays
erased, which is the bootloader's view, and a limitation names an erased
app slot that holds written bytes and says they are not read as an image.
The reader reads every partition byte once more to find them.

* fix(artifacts): derive the ESP boot selection for every partition table

The boot selection lived inside otadata, so a table without an otadata
partition, the common factory-only layout, had none. ESP-IDF's
bootloader_utility_get_selected_boot_partition returns the factory index
when the table declares no otadata partition.

Move it to a top-level boot_selection that every layout has. Its basis
names the bootloader's branch: otadata, factory-fallback and ota_0-fallback
from the records, no-otadata for a table without otadata, none for the
bootloader's INVALID_INDEX, and unknown when the dump lacks a record the
bootloader reads, which replaces the null selection. running_partition
moves with it, and otadata keeps its partition index and records. The
assumptions name what each branch leaves out: no records assumption
without otadata, and none for none or unknown. The real-tool lane checks
no-otadata on a table gen_esp32part built without otadata.

* fix(artifacts): say when an ESP image is a flash dump read from 0x1000

An ESP32 dump read from flash 0x1000, as read-flash 0x1000 or merge-bin
--target-offset 0x1000 writes it, opened automatically as its bootloader
image with a megabyte of undescribed bytes and no next probe. The flash
reader refuses that origin, but nothing told an agent which flash_offset to
pass.

espFlashDumpOrigin owns the inference: an image of a chip whose ROM loads
the bootloader from flash R, at file offset F, is the bootloader of a dump
read from R - F when a partition table sits where that origin puts 0x8000.
The ESP image reader asks it for a non-app image at file offset 0, so the
result does not depend on how the reader was created, and records
flash_dump {flash_offset, table_file_offset}, null otherwise, with a
limitation that says to reopen the file as esp-flash-image with that
flash_offset. inspect_artifact proposes the same open_binary call as a next
probe, and the flash reader's misplaced-origin refusal names the offset.

* perf(artifacts): summarize nested ESP images in the flash layout summary view

The summary view returned an ESP flash layout's root facts whole, so each
app partition and the bootloader carried every segment and signature
block, about half of a dump's summary.

The summary view now gives each nested image a summary instead of its
facts: status, chip, entry point, segment count, load ranges (each mapped,
loaded or unclassified segment's address and declared length), the
checksum and appended SHA-256 statuses, coverage and limitations. Complete
detail keeps the full facts, every segment included, and the retained
Evidence is unchanged. On a 16 MiB device dump the summary's root falls
from 5,141 to 2,657 bytes, and the summary Evidence from 10,038 to 7,554.

* test(artifacts): expect the misplaced image the ESP bootloader search reports

8a748d3cc added misplacedImage to the bootloader search, which the
locator uses to name the origin a misplaced bootloader implies, but one
test still compared the search result without it. Expect the image's
chip and file offset, and no image for an unknown chip.

* fix(artifacts): give every ESP partition from the dump's start an entry

After ecbc1a772 kept coverage complete for a dump cut short, a partition
wholly past the end of the file still had no entry, only a
partitions_outside_dump row. Comparing a merge-bin dump with a full device
read then reported that partition as added or removed, as if one table
did not declare it.

Every partition from the dump's first byte on is now an entry holding the
bytes the file has: none for one past the end, with a limitation saying
the file holds none of its bytes, no image facts and null written fields.
partitions_outside_dump keeps only partitions that begin before the dump's
first byte, and coverage is unknown when one does, since it has no entry.
Two dumps that lack the same partition now compare it as unchanged, and a
dump against a longer one reports the partition as changed; an MCP test
of a merge-bin dump against a full one checks that no path is added or
removed.

Unlike the ESP image reader, which marks a truncated image's coverage
unknown because later segments and signature blocks may be hidden, the
flash reader can list every partition from the table whatever the file's
length; only the entry limitation follows the image reader.

* fix(artifacts): select no ESP app from a partition table the bootloader rejects

boot_selection followed bootloader_utility_get_selected_boot_partition but
not the table check before it. For a table whose MD5 does not match, or
that has a second MD5 entry, esp_partition_table_verify fails, the
bootloader selects no app and resets. REA still derived a slot from the
otadata records, although the table's own limitation said the bootloader
rejects it.

The selection now has basis none, with no assumptions, for a table the
decoder marks invalid. It also follows two more branches of the
bootloader: an otadata partition at offset 0, which the bootloader takes
for none, selects the factory index as no-otadata, and a table without an
OTA app selects its fallback even when the dump lacks a record, since the
bootloader then ignores the records.

The bootloader also rejects a table whose partitions end past the flash
size in its header. REA does not model that check; the format guide says
so.

* fix(artifacts): require the ESP dump origin's table to follow the image

espFlashDumpOrigin named a later flash origin whenever a partition table
decoded where that origin puts 0x8000. Bytes inside the image's own
segments could be read that way, so an ESP32 bootloader whose segment data
held table-shaped bytes at file offset 0x7000 was reported as a dump read
from 0x1000.

The table must now start at or after the image's end, the rule the locator
already applies to the default table. The ESP image reader passes the
image_end it decoded, or the file size for a truncated image; the flash
reader's refusal passes the end of the misplaced image's segments. The
bootloader search drops its misplaced flag, which only restated
misplacedImage, and the next probe formats offsets with offsetText.

Reader tests cover the 0x1000 and 0x2000 ROM offsets, a standalone
bootloader, bytes that begin like a table, an app with a table at 0x7000
and a table inside a segment; without the boundary check, three of them
fail.

* fix(artifacts): give the ESP flash summary its own kind and each image's identity

The summary view's ESP flash root kept kind esp-flash-image, so a consumer
bound to kind could not tell an image's summary from its full facts, and
the advertised schema held two objects with the same kind const. It is now
esp-flash-image-summary.

The per-image summary also dropped the descriptor, which is what tells two
app slots apart, and named each image only by its partition index, which
the summary view, having no entry rows, could not resolve. Each nested
image now carries its entry path from the layout plan, in both views. The
summary adds the descriptor kind with its identifying fields (an app's
project_name, version, idf_ver, secure_version and app_elf_sha256; a
bootloader's version, idf_ver and secure_version), the signature block
count and each load range's classification. Its enums and fields derive
from the schemas that own them.

An MCP test reads a dump with an app in ota_0 and an erased ota_1 that
holds older bytes: it checks both summaries, that the summary's inventory
Evidence is the one the complete view returns with full facts, and the
erased slot's written range.

* test(artifacts): cover cancel and close during the ESP written-bytes scan

The written-bytes pass reads every byte of each partition the dump holds,
checking that the reader is open before each chunk, but only app decoding
had a cancellation and close test. A data partition, which only that pass
reads, now holds 9 MiB; once the scan has examined its first chunk, a
cancel rejects preparation with the caller's reason and a close with
unavailable, and the scan examines no further chunk.

The erased-slot test now asserts the whole set of erased-slot limitations,
so factory, ota_0 and nvs, which the bootloader reads or which are not app
slots, are shown to have none.

* docs(artifacts): re-time the ESP flash lane and state only observed causes

The lane ran again after its assertions changed; both esptool runs passed,
and the timed run's figures replace the earlier ones. The erased-slot
paragraph no longer names a cause for the older bytes, which REA cannot
observe, and the skill reference states that every table has a
boot_selection in its own sentence, with the none basis for a table the
bootloader rejects.

* fix(artifacts): retire ESP flash members as the ESP image reader does

#7498's maintainer commits made the ESP image reader keep a member owned
until its consumer closes it, retire fully buffered bytes when
cancellation arrives after production, and refuse to finish an inventory
paused across close. The ESP flash reader was copied from the earlier
reader. Main's shared stored-member lifecycle cases failed two of eight
against it: a paused inventory completed after close, and buffered member
bytes stayed readable after cancellation.

Give the flash reader the same lifecycle and run the shared cases against
it.

* docs(artifacts): re-time the ESP flash lane after merging main

The lane passed again with esptool v5.6.0 and 4.12.0 on the merge of upstream main. Record the v5.6.0 run's time and peak resident set.

* fix(artifacts): read ESP image Evidence recorded before flash_dump

The flash layout work made `flash_dump` a required field of the
`esp-image` root metadata. Evidence recorded before it has no such
field, so newer REA rejected records that were valid when they were
made: `compare_artifacts` and `inspect_analysis_view` reported
`evidence_integrity_mismatch` for them.

The field is now optional when read. A record without it parses as it
is, so the graph digest it commits to still matches; nothing fills the
field in. The image reader still writes it for every image, and the
inspection probe reads a missing field as no hint.

A regression test recommits an image inventory without the field and
passes it inline to `compare_artifacts` and `inspect_analysis_view`.
Against a server built with the required field, `compare_artifacts`
rejects it.

* fix(artifacts): stop the ESP flash gap scan when the reader closes

The scan for the first written byte in each undescribed gap checked
only the caller's signal. `close()` marks the reader closed and waits
for preparation, so it waited while the rest of a long erased gap was
read.

The gap scan now takes the reader's open check, as the written-bytes
scan and the image decoder do, and checks it before each chunk. Tests
cancel or close the reader after the scan's first chunk of a 9 MiB
erased gap and confirm that no later chunk is examined.

* fix(artifacts): name ESP partitions with Windows device labels by index

The safe-label rule accepted labels such as `NUL`, `con` or `COM1`, so
extraction wrote `partitions/NUL.bin`. Windows reserves those names
before any extension, and ordinary Windows tools cannot use such a
file.

A label that is a Windows device name (`CON`, `PRN`, `AUX`, `NUL`,
`COM0`-`COM9` and `LPT0`-`LPT9`, any case, alone or before a dot) now
takes the existing index fallback. The partition metadata and the
entry's source path keep the label.

* fix(artifacts): read ESP flash partitions' written bytes in one pass

Each partition got its own scan of the bytes the dump holds, so
partitions declared over the same bytes read them again and again.
Overlaps only add limitations, so a crafted table reached this normally:
94 overlapping partitions over a 32 MiB dump would examine about 3 GiB
before the first entry.

The reader now reads the bytes the partitions cover once. Partition
boundaries cut them into segments; one pass counts each segment's
written bytes and bounds, and each partition's extent is the sum of the
segments inside it. Every partition keeps its own declaration, extent
and limitations. The pass checks the reader's open state before each
chunk, as the per-partition scan did.

A test declares 60 partitions over one MiB, 40 over all of it and 20
over its first half, and checks each partition's extent and the
overlap limitations. The reader reads 1,113,256 bytes of the
1,114,112-byte dump; one scan per partition read 52,493,480.

* test(artifacts): fail the ESP lanes on failed commands and refusals

`otatool` turned a nonzero exit into returned text, which its callers
discarded, and `inspect()` returned `{ refused }`, which the flash lane
never checked. A failed command then surfaced later as a slot
assertion, an output-parser error or a TypeError, hiding its cause.

Commands the lanes need to succeed now reject with the output they
exited with: `otatool` and `inspect()` do so through a shared
`failedCommand`. An expected refusal is opt-in: `refusal()` returns
REA's output and fails the lane when REA opens the file. The ESP image
lane's two ESP8266 cases use it.

Checked by calling `otatool` on a file without a table, `inspect()` on a
file REA refuses and `refusal()` on a file REA opens; each rejects with
its cause.

* fix(artifacts): require a partition entry in an ESP partition table

The decoder counted the slot, not the partitions, so a lone MD5 entry
over the empty prefix, followed by the terminator, decoded as a table
with no partitions. Default and caller-selected detection then accepted
that empty layout, although the guide requires one partition.

A table now needs one partition entry before its terminator. An MD5
entry alone is refused as `entry 1 at 0x20 ends the table before any
partition entry`. The cases cover the decoder and both automatic and
caller-selected location.

* fix(artifacts): decode an image shared by ESP app partitions once

Each app partition got its own decode, so app partitions declared over
the same bytes decoded and hashed the same image again and again, the
same pattern the written-bytes scan had. With 60 app partitions over
one 960 KiB image the reader read 64,029,736 bytes of a 1,114,112-byte
dump.

Regions with the same file range now share one decode; each keeps its
own copy of the facts. Partitions with different ranges still decode
separately, because truncation can change the facts: at most one decode
per partition the table holds, each within its partition.

A test declares 60 app partitions over one image, 40 holding all of it
and 20 cutting it short, and expects three decodes: the bootloader, the
whole image and the cut one. The 60-partition dump now reads
2,161,864 bytes, as a dump with one app partition does.
2026-10-31 15:24:32 +08:00
Entrpi 54756ff24e test: guard target format vocabularies and DOL snapshot saves (#7481)
* test(mcp): save and reopen a GameCube DOL snapshot

#7290 reported that DOL Evidence could not be bundled or saved; 50822e1ef
fixed the bundle manifest and added bundle export/import coverage, but no
test saved a DOL session through close_binary. Save a DOL snapshot with
recorded Evidence, check its target and artifact manifest, then reopen it
and replay the read without running the provider again.

* test(binary): require every target format in each target vocabulary

A new target format must be added by hand to the Evidence subject,
bundle manifest, snapshot target and live summary vocabularies; missing
one caused #7290. Give every BinaryTarget format a fixture through a
mapped type, so a new format fails compilation until it has one, and
push each fixture through the producers that persist or project targets.
Caller-selected format hints must name executable target formats.

This is a guard until target formats have a single owner.

* test(mcp): assert the replayed DOL result and the owned replay limitation

The DOL snapshot replay test checked the subject and the provider-call
count but not the answer, so a replay returning null or another value
would pass. Compare the replayed normalized result with the original.
Name the replay limitation as SNAPSHOT_REPLAY_LIMITATION in the snapshot
cache that adds it, and assert that value instead of repeating the
sentence.

* test: list Intel HEX and S-record targets in the vocabulary guard

Upstream added the intel-hex and srec formats (#7136). The guard requires
a fixture for every target format, so after merging main it no longer
typechecked; both formats now have archive fixtures and pass the same
persistence and projection checks.

* test: list UnityFS among the target format fixtures

Upstream #7699 added the unityfs target format, so the vocabulary test's
per-format fixtures must name it; without one the test no longer typechecks
against main.

* test: list uImage among the target format fixtures

Upstream #7234 added the uimage target format, so the vocabulary test's
per-format fixtures must name it; without one the test no longer typechecks
against main.

* test: list the ESP image among the target format fixtures

Upstream #7498 added the esp-image target format, so the vocabulary test's
per-format fixtures must name it; without one the test no longer typechecks
against main.
2026-10-30 22:35:53 +08:00