* Add support for hudson.model.Failure in CLI error output
* Fix Javadoc
* confirm the "unexpected" message does not show
* Adapt tests to changed behavior
---------
Co-authored-by: Daniel Beck <daniel-beck@users.noreply.github.com>
* Propagate readOnlyMode into SCM Checkout Strategy descriptor config
f:dropdownDescriptorSelector renders its selected descriptor's config.jelly
lazily via AJAX (lib/form/dropdownDescriptorSelector.jelly), and only
variables listed in its `capture` attribute are visible to that lazily
rendered fragment. hudson/model/Job/configure.jelly sets readOnlyMode for
the whole config page, but lib/hudson/project/config-scm.jelly's call for
scmCheckoutStrategy didn't capture it, so a Job's SCM Checkout Strategy
config fragment was not disabled for read-only viewers (Item.READ +
Item.EXTENDED_READ, no Item.CONFIGURE), even though every other field on
the page correctly disables in that case.
This mirrors the same gap that was originally found and fixed in
cloudbees-folder-plugin (JENKINS-62218,
jenkinsci/cloudbees-folder-plugin#747) and reverted there since it's a
core issue affecting every Job configuration page, not just folders. Part
of the JENKINS-12548 read-only system configuration browsing epic
(JEP-224). No Jira ticket filed yet for this specific core gap.
* Propagate readOnlyMode to remaining dropdownDescriptorSelector fragments
f:dropdownDescriptorSelector defers rendering of every non-selected
descriptor's config.jelly/config.groovy via l:renderOnDemand, which only
forwards variables named in its `capture` attribute into that later
AJAX-rendered fragment. readOnlyMode (JEP-224, JENKINS-12548) is not
forwarded by default, so a viewer with Item.EXTENDED_READ but not
Item.CONFIGURE can get back a fully editable fragment for any option other
than the currently selected one, even though the rest of the page correctly
disables.
The gap was first found and fixed for the SCM Checkout Strategy dropdown on
Job/configure.jelly (previous commit, also reported against
cloudbees-folder-plugin#747 / JENKINS-62218 and reverted there as a core
issue). Review of that fix pointed out the bug is generic to
dropdownDescriptorSelector, not specific to SCM Checkout Strategy. This
commit closes the remaining Job/agent-configuration-scoped call sites found
by auditing all *.jelly and *.groovy usages of the tag in core:
- HudsonPrivateSecurityRealm/config.jelly (Password Complexity Rule)
- DelegatingComputerLauncher/config.jelly and DumbSlave/configure-entries.jelly
(agent Launch method, Availability/retention strategy)
- Maven/config.jelly (Settings file, Global Settings file build-step config)
- GlobalFingerprintConfiguration/config.jelly (Fingerprint Storage Engine)
- BuildDiscarderProperty/config-details.jelly and
SimpleGlobalBuildDiscarderStrategy/config.jelly (Discard old builds strategy,
at both the per-job and global-default nesting levels)
- GlobalMavenConfig/config.groovy (default settings/global settings provider)
- ViewsTabBar/GlobalConfigurationImpl/config.groovy (Views Tab Bar)
- GlobalCrumbIssuerConfiguration/config.groovy (Crumb Issuer)
hudson/model/MyViewsProperty/config.jelly (Views Tab Bar on a user's own
account page) was deliberately left out: that page requires full
Jenkins.ADMINISTER and never sets readOnlyMode in its render chain, so it is
not an instance of this bug.
A further instance of this same gap exists on the "Manage Jenkins > Security"
page (Security Realm / Authorization Strategy / Markup Formatter selectors),
reachable with only Overall.SYSTEM_READ. That one is being reported through
the Jenkins Security Team's private disclosure process instead of here, since
it can expose an editable Security Realm/Authorization Strategy fragment to a
low-privilege viewer -- a permission-escalation-adjacent issue rather than a
plain read-only-UI gap.
Adds a regression test (SCMCheckoutStrategyReadOnlyModeTest) that registers a
throwaway SCMCheckoutStrategy with a real editable field, triggers the same
renderOnDemand() JS a browser fires when switching the dropdown, and asserts
the resulting fragment is rendered as the standard read-only N/A placeholder
rather than an editable input.
* Propagate readOnlyMode to GlobalSecurityConfiguration's dropdownDescriptorSelector calls
Applies the same fix as the previous commit to the last remaining
dropdownDescriptorSelector call sites in core: Security Realm, Authorization,
and Markup Formatter on hudson/security/GlobalSecurityConfiguration/index.groovy
("Manage Jenkins > Security", reachable with only Overall.SYSTEM_READ).
This was initially held back to verify it wasn't a privilege-escalation risk
before publishing: GlobalSecurityConfiguration#configure() unconditionally
calls j.checkPermission(Jenkins.ADMINISTER) as the first line, before any
submitted JSON is read, so a forged configSubmit POST from a SYSTEM_READ-only
user is rejected server-side (AccessDeniedException3) regardless of what the
UI rendered; the Save/Apply buttons are also only rendered inside
l.isAdmin(). The lazily-rendered fragment itself never carries live secrets
either, since dropdownDescriptorSelector renders non-selected options with
instance=null. Confirmed the same double gate (checkPermission(CONFIGURE) in
doConfigSubmit) exists for the other already-fixed call sites, so this is the
same severity class as the rest of the change: a read-only-mode UI/UX gap,
not a write-path vulnerability.
Adds a regression test (GlobalSecurityConfigurationReadOnlyModeTest) covering
this Groovy-view, SYSTEM_READ-scoped rendering path, following the same
pattern as SCMCheckoutStrategyReadOnlyModeTest: register a throwaway
AuthorizationStrategy with a real editable field, trigger the same
renderOnDemand() JS a browser fires when switching the dropdown, and assert
the fragment renders as the standard read-only N/A placeholder.
* Propagate readOnlyMode once in dropdownDescriptorSelector taglib, not per caller
Per jtnord's review on #27167: rather than requiring every caller of
f:dropdownDescriptorSelector to pass capture="readOnlyMode" (12 call
sites in core alone, plus any plugin using the same taglib), fix it
once in the taglib itself.
lib/form/dropdownDescriptorSelector.jelly already always captures
"descriptor" and "it" for the lazily rendered l:renderOnDemand
fragment regardless of what the caller's capture attribute lists.
readOnlyMode now joins that same always-captured set, so read-only
mode propagates into every lazily loaded descriptor fragment
ecosystem-wide without any caller changes.
This reverts the 12 per-callsite capture="readOnlyMode" additions
from the previous commits on this branch and updates the two
JenkinsRule/HtmlUnit regression tests' documentation to point at the
new, single fix location. Both tests still pass unchanged, since they
exercise the real page end-to-end rather than depending on any
caller's capture attribute.
* Add a taglib-level regression test for dropdownDescriptorSelector
The two existing regression tests on this branch (SCMCheckoutStrategy,
GlobalSecurityConfiguration) exercise real pages end-to-end through
JenkinsRule + MockAuthorizationStrategy, which only covers 2 of the
now-generic fix's many callers and requires standing up a full
permission model to prove a taglib-level behavior.
Following this project's existing convention for testing this exact
taglib family (lib/form/DropdownListTest, lib/layout/RenderOnDemandTest,
lib/form/RowVisibilityGroupTest, the latter of which already reuses a
single config.jelly across sibling Descriptor implementations), add a
lean unit test that exercises f:dropdownDescriptorSelector directly via
a synthetic RootAction, with no security realm involved. The fixture's
test1.jelly sets readOnlyMode directly and deliberately omits
capture="readOnlyMode", proving the taglib itself is responsible for
propagating it into the lazily-rendered fragment -- which by
construction covers every current and future caller, not just the two
pages exercised by the other tests.
* Empty commit to retrigger CI
* Use Locale.ROOT for case-insensitive matching in CollectionSearchIndex
* Rename misleading case-sensitivity variable in CollectionSearchIndex
The local variable in suggest() held the result of
UserSearchProperty.isCaseInsensitive() but was named isCaseSensitive.
Rename it to caseInsensitive, matching FixedSet.suggest(). No
behavior change.
* Use LOGGER instead of System.out in doSimulateOutOfMemory
Replaces a System.out.println call with the class-level LOGGER at
WARNING level. This is consistent with logging practices used
elsewhere in Jenkins core and ensures the message is captured by
the logging framework rather than the standard output stream.
* Fix missing return after sendError in Jenkins#doDoFingerprintCheck
When the CSRF crumb is invalid, doDoFingerprintCheck calls
sendError(403) but then continues to sendRedirect2 on the same
response. Since the response is already committed, this throws
IllegalStateException, which surfaces as an unhandled error in
the logs and may yield a 500 response depending on the servlet
container's buffering behavior.
* Fix missing `New Item` button in new dashboard view
With the new dashboard page enabled the `New Item` button is missing for
non admins usually. It was wrongly shown for users that had the
`View.CREATE` permission.
* Potential fix for pull request finding 'Restrict internal Jelly class-loading helper'
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* handle myview properly
---------
Co-authored-by: Tim Jacomb <21194782+timja@users.noreply.github.com>
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Update dependency org.jenkins-ci:jenkins to v2.1413.v65a_1fb_5a_dd02
Signed-off-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Reset system properties on every DefaultConfidentialStoreTest
Remove the test execution order dependency that was exposed by:
* https://github.com/jenkinsci/jenkins/pull/27389
* Split dependencyNotInstalled test into a separate test class
Simpler than identifying the state that is retained between tests.
* Reuse shared PluginWrapper test support
Co-authored-by: MarkEWaite <156685+MarkEWaite@users.noreply.github.com>
* Use AfterEach instead of BeforeEach to clear system properties
https://github.com/jenkinsci/jenkins/pull/27389#discussion_r4121913093
---------
Signed-off-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: Mark Waite <mark.earl.waite@gmail.com>
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: MarkEWaite <156685+MarkEWaite@users.noreply.github.com>
Adapt OperatingSystemEndOfLifeAdminMonitorTest for Ubuntu 22.04
Ubuntu 22.04 is end of life April 1, 2027. That means we are now
within the 6 month end of life warning window for the operating system.
That causes the test to fail on ci.jenkins.io because it is using Ubuntu
22.04 agents.
Temporarily adapt the expected values in the tests for Ubuntu 22.04.
Those changes can be removed when the agents on ci.jenkins.io are running
a newer operating system. Refer to help desk:
* https://github.com/jenkins-infra/helpdesk/issues/5124
Testing done:
* Confirmed tests fail on Ubuntu 22.04 without this change
* Confirmed tests pass on Ubutnu 22.04 with this change
LTS RPM file names follow the same naming pattern as weekly now.
Testing done:
* Confirmed that the action to upload 2.580.1 LTS failed for the RPM file.
* Downloadedd the 2.580.1 LTS binary locally using the weekly file pattern
renovate[bot]