* feat(setup): manage fx registrations with its private profile modes fx becomes a client-table row, so doctor, update and uninstall see the registration rea mcp add wrote, and setup offers fx when ~/.fx or FX_HOME exists. Setup now publishes a private profile through the same owner as mcp add (folder 0700, file 0600) and repairs those modes when the row is otherwise current. Doctor parses fx's array launcher instead of reporting it invalid. * fix(setup): judge fx's private profile by its targets and keep its cleanup owner Address review: privateProfileModesCurrent reads the modes of the canonical file and folder, so a linked profile becomes current; clientConfigurationAligned applies the same modes rule as plan and apply; a private-folder close failure reaches the caller with its cleanup owner instead of becoming a write failure; and the setup plan names the folder and file modes it sets. * fix(setup): keep fx's recovery backups owner-only beside a linked profile Setup and uninstall copied a private profile's original bytes with copyFile, so a backup beside a linked ~/.fx/mcp.json kept the target's readable mode outside the folder setup secures. Both now use the owner-only backup owner that mcp add already used. * feat(setup): manage Junie registrations and apply its location policy (#10712) * feat(setup): manage Junie registrations and apply its location policy Junie becomes a client-table row, so doctor, update and uninstall see the registration rea mcp add wrote, and setup offers Junie when its home exists. Whether Junie loads its default user MCP file now has one owner, read through the client policy block that setup, doctor and mcp add already consult: setup and mcp add refuse, and doctor reports, a registration Junie would not load. * fix(setup): read Junie's user configuration as strict JSON Address review: Junie loads config.json as strict JSON, so comments, trailing commas or an empty file leave its MCP location choice unknown, as before the move into the row. Filesystem tests also clear JUNIE_*, FX_HOME and MCPORTER_CONFIG so a developer's own client locations cannot be inspected or removed. * test(setup): keep the detected client order out of the lifecycle suite body The expected detection order grew with each folded client until the suite callback exceeded the max-lines-per-function lint limit. * fix(update): report a client whose policy setup refuses instead of failing maintenance Junie's disabled default locations (and Gemini's settings policy) make doctor report the registration stale, but setup refuses that client, so selecting it failed every other client's maintenance. The registration inspection now carries the setup blocker, and maintenance lists that client with its reason instead of selecting it. * refactor(setup): read fx's private-profile host through HOST_PLATFORM The fx private-profile mode checks and permissions describe the host REA runs on, so they take it from the host-platform owner instead of reading process.platform (refused by the ratchet from #10911). * feat(setup): manage Goose registrations across its configuration layers (#10715) * feat(setup): manage Goose registrations across its configuration layers Goose becomes a client-table row, so doctor, update and uninstall see the registration rea mcp add wrote, and setup offers Goose when its user file or system file exists. Goose loads its system file and GOOSE_ADDITIONAL_CONFIG_FILES beneath the user file and overlays each extension one field deep; doctor now reports that effective registration, while setup, update and uninstall change only the user file. Doctor also parses Goose's cmd launcher instead of reporting it invalid. * fix(setup): keep Goose's layered environment and load order through setup and uninstall Address review: read Goose's env alias and apply requested settings over envs; keep an inherited lower envs map instead of masking it with an empty default; keep each layer's last load so a repeated user file keeps its precedence; split GOOSE_ADDITIONAL_CONFIG_FILES with Windows quoting; validate only the effective environment across read-only layers; refuse uninstall while a read-only layer keeps REA enabled; and clear Goose's location variables in tests. * fix(setup): apply requested Goose settings over the inherited environment * fix(setup): leave lower-layer Goose settings in force and read admin layers read-only Setup no longer writes its default timeout, enabled, name or description into Goose's user entry when only a lower layer declares that setting, so the inherited value keeps applying and a repeat setup stays current. Uninstall reads Goose's read-only lower layers where Goose reads them, without the write target's ownership check, so an administrator-owned system file no longer blocks removal. The client table accepts an injected Goose system-config path so tests no longer read or skip on the host's /etc/goose/config.yaml; adds a shadowed-invalid-lower-layer regression. * fix(setup): keep an inherited Goose env alias's spelling when writing the user entry Goose overlays each extension field separately, so writing envs into the user file beside a lower layer's env alias left both in force, which readers reject as ambiguous. Setup now writes the user map under the alias a lower layer declares, and mcp add neither adds a default envs map beside an inherited alias nor renames a user alias the lower layer shares. * test(setup): inject Goose's system layer into mcp add selection resolveMcpRegistrationClients accepts the caller's system configuration paths, so the Goose layers test no longer reads the host's /etc/goose/config.yaml. * fix(setup): report REA's Goose registration that only a read-only layer defines * test(setup): pass an isolated Goose system path through update maintenance and the mcp add table * fix(setup): judge Goose uninstall by the merged entry and stop on an unreadable lower layer * fix(setup): select Goose's env alias by presence so a null alias stays malformed * fix(setup): use the shared record predicate for Goose's layered merge after #10588 * feat(setup): give Kilo a client-table row with an async layered location (#10823) * feat(setup): give Kilo a client-table row with an async layered location The client table gains a layeredLocation hook and resolveSupportedClients, which awaits it. Kilo's row resolves its user-scope layers through the same owner rea mcp add uses (KiloClientLocation), so both pick the same write target; the synchronous row keeps kilo.json in Kilo's config root with every candidate layer. The table refuses a relative KILO_CONFIG, KILO_CONFIG_DIR or XDG_CONFIG_HOME because Kilo's working directory is unknown. Refs #7181 * fix(setup): treat every folder Kilo reads as evidence that it is installed * fix(setup): normalize Kilo's absolute table paths and parse its command array * feat(setup): resolve the client table's layered locations in setup, doctor, update and uninstall (#10832) SetupHost (detection and the selectable table), ClientRegistrationStatus, uninstall, doctor's selected-registration environment and the mcp add catalog now read resolveSupportedClients, so each sees the Kilo layer Kilo writes rather than the synchronous default. Refs #7181 * docs(adr): record the one-client-table decision for setup and mcp add * fix(setup): refuse to read a client row whose location is unresolved Doctor's selected-client settings read a Kilo row whose relative KILO_CONFIG left only path evidence, so it inspected a file relative to REA's folder. The shared configuration reader now refuses such a row, so every reader reports the registration as unreadable. * docs(adr): name the row's layeredLocation hook * feat(setup): read KILO_CONFIG_CONTENT as Kilo's top read-only layer (#10851) * feat(setup): read KILO_CONFIG_CONTENT as Kilo's top read-only layer * fix(setup): refuse a Kilo uninstall that would expose or keep another layer's rea entry (#10852) * fix(setup): recheck KILO_CONFIG_CONTENT at write time and name it in doctor's recovery * refactor(mcp): register Kilo through its table row and remove the registration-only catalog kind (#10862) * refactor(mcp): register Kilo through its table row and remove the registration-only catalog kind * refactor(mcp): resolve user-scope targets in the catalog so location modules never import the client table * test(setup): cover Kilo's KILO_CONFIG, home-folder and inline-only layers * fix(setup): report REA's Kilo entry that only KILO_CONFIG_CONTENT sets during uninstall Doctor reports a registration that KILO_CONFIG_CONTENT alone defines, but uninstall found no file entry and reported Kilo as skipped. Uninstall now reports it once as failed and names the variable to edit. * docs(adr): record Kilo's inline layer in the client-table decision * fix(setup): compare Windows environment names without case when a higher layer overrides REA's entry Kilo's inline-layer check and Gemini's system-override check compared environment maps by exact key, so an equal Path beside PATH on Windows was reported as an override and setup refused the client. Both compare the entry as the client launches it. * fix(update): leave a stale Kilo registration KILO_CONFIG_CONTENT sets out of maintenance Setup refuses a refresh the inline layer would override, and one refused client failed every other client's maintenance. The registration inspection now names the inline layer as the setup blocker of a stale entry, and maintenance reports Kilo with that recovery instead of selecting it. * fix(setup): refuse relative JUNIE_HOME and Cline CLI overrides like the other client roots (#10909) * fix(setup): refuse relative JUNIE_HOME and Cline CLI overrides like the other client roots * fix(setup): refuse Windows client paths without a drive that follow the client's current drive * fix(update): select maintenance clients through setup's own refresh refusal check Maintenance predicted setup's refusal with its own rule: any inline rea entry blocked a stale registration, while an aligned one was never checked. A harmless KILO_CONFIG_CONTENT entry (enabled: true) kept a stale Kilo launcher pinned, and an inline value setup would not write (an extra environment variable) let an aligned Kilo registration block every client's maintenance. Setup's refusal checks (client policy, then the inline override comparison of the entry it would write) now live in one reader that setup's alignment check and maintenance share. Maintenance asks it for every owned enabled candidate and reports a refused client with setup's remediation and its real state. * fix(update): keep failed refresh-check reads owned by the supplied maintenance scope clientRefreshRefusal read the client's layers, target file and policy without the caller's resource scope, so a close that failed during those reads threw a cleanup failure no scope retained; maintenance then reported it as text and the scope's close could not retry the descriptor. The refresh reader now takes the scope and passes it to every read. * fix(setup): take the Kilo layer readers' default host from HOST_PLATFORM and the shared record predicate After rebasing on main (#10911, #10588): the new inlineRegistrationOverride and resolveSupportedClients defaults read the running host through the host-platform owner, and the layered launcher merge uses isRecord. * fix(update): keep an unreadable layer's reason in the refresh refusal check readClientRefresh returned undefined for an unreadable or malformed layer, so clientRefreshRefusal reported no refusal and maintenance selected a client whose setup preflight then failed. The reader returns the typed file failure, and the refusal check reports its detail like setup's preflight does. * fix(setup): count REA's entry in KILO_CONFIG_CONTENT as Kilo lifecycle evidence Doctor, update and uninstall inspected a client only when one of its folders existed, so a registration set only by KILO_CONFIG_CONTENT was skipped. A read-only inline layer that sets REA's entry is now evidence on its own. * fix(update): report a client whose only conflict is a discovered provider path as needing setup * fix(update): match discovered settings by the platform's environment identity * fix(update): preflight maintenance with setup's write-target checks and treat discovered inline paths as unknown
English · 简体中文 · 繁體中文 · 日本語 · 한국어 · Türkçe · Русский · Tiếng Việt · ไทย · Deutsch · Español · Français · Українська · Polski · Português (Brasil) · العربية · فارسی · Bahasa Indonesia · Italiano · Ελληνικά · മലയാളം · Roman Urdu · Română · Български
REA: Reverse Engineer Anything
One MCP for reverse engineering across binaries, applications, and runtime behavior.
See a feature you like. Understand how it works, down to the binary level.
Quick start · How REA works · What you can analyze · Showcases · Build RL environments · FAQ · Documentation
npx rea-agents setup
Important
Get REA from morluto/rea, rea.tools, or the rea-agents npm package. Follow the installation and release links from these official sources. A similar repository name or copied README does not establish that a download is official.
See a feature in an app that you want in your own product? Ask your agent to investigate it with REA. It can inspect the app without its source code, explain how the feature works, show the evidence, and build a version for your project.
REA connects your agent to tools for inspecting native binaries, JavaScript and Electron apps, .NET assemblies, and websites. You can also use the same tools from your terminal. Analysis runs locally, and results include the evidence and limitations behind each conclusion.
Setup registers REA with your agent and installs matching workflow instructions. Native analysis can use an existing Hopper, Ghidra, IDA or Kuna installation; setup can optionally install Hopper with approval. Static JavaScript analysis needs no native analysis engine.
Visit the REA website for setup instructions, illustrated guides, and real case studies.
Quick start
On Linux, Ghidra, JADX, firmware tool launches and static JavaScript/Electron
analysis require a procps-compatible system ps for process ownership
checks. Recovery steps are in docs/getting-started/installation.md under
"Linux owned-process prerequisite".
Set up your agent
With Node.js and npm installed, run:
npx rea-agents setup
Choose your agents, review the proposed changes, and approve them. Setup adds REA's MCP server and matching workflow instructions, with backups of existing configuration. Restart your agent afterward. Setup records the selected runtime and REA entry script directly. If acquired through a package runner, keep its cache entry available. Run package acquisition from a trusted directory outside the target project. Installation and recovery details are in the setup guide below.
Setup supports Claude Code, Codex, Cursor, Gemini CLI, Grok Build and other agents. See installation and setup for provider configuration, manual MCP registration, Claude Code/Codex plugins, and the Cursor Marketplace plugin.
MCP uses compact input schemas by default to reduce context overhead. Set
REA_MCP_INPUT_SCHEMA_PROFILE=full in your MCP registration when you need the
complete advertised field guidance and nested validation details. Both profiles
keep the full tool set and canonical server validation. See
"Compact input schema profile" in the MCP contracts guide.
Output schemas are omitted from tools/list by default: no model API reads
them, and REA validates every result itself. Set
REA_MCP_OUTPUT_SCHEMA_PROFILE=compact to advertise each output schema within
a 4,096-byte budget, or full for complete output schemas (for MCP clients
that validate results). All settings keep canonical server-side validation and
complete structured results. See "Output schemas" in the MCP contracts guide.
Ask your agent
Understand how search works in the Notes app, show me the evidence, and build a
similar feature for my project.
Replace Notes with your target app and the feature you want to understand.
Use the terminal
Inspect an extracted JavaScript/Electron app directory or ASAR:
npx -y rea-agents@latest analyze-javascript-application /absolute/path/to/app --json
The result includes modules, imports, Electron boundaries and their evidence.
Replace the path with your target, such as "D:/apps/example" on Windows.
To install the rea command for regular use:
npm install --global rea-agents
rea --help
For native analysis, configure a provider first. See the CLI and Evidence guide for native commands, provider selection, snapshots and scripting.
Update REA
REA changes quickly, and new releases include frequent bug fixes. Keep your installation up to date.
For a CLI installed with npm install --global or bun add --global:
rea update
rea --update is an alias for this verified workflow and accepts the same global
output flags. Use rea update when combining it with other command controls.
Updater commands retain at most 4 MiB of stdout and stderr combined. Oversized metadata replies are rejected after the command exits; verbose installs continue with bounded diagnostics. Human progress output respects terminal backpressure and waits for submitted writes to finish.
Bun global updates require Bun 1.2.17 or later. With an older Bun release,
upgrade Bun manually before running rea update.
To refresh your agent registrations and skill, run the setup command printed by the update.
If you use npx, update your agent setup with:
npx rea-agents@latest setup
Review the setup changes and restart your agent. For one-off CLI commands,
use npx rea-agents@latest followed by the command. With Bun, use
bunx rea-agents@latest in place of npx rea-agents@latest.
How REA works
Your agent calls REA through MCP to inspect the target and trace relevant code. REA returns findings with their evidence. The agent uses them to ask follow-up questions, explain the behavior, or write and test an implementation. CLI commands use the same workflows.
What you can analyze
REA requires Node.js 22.x (>=22.23.4), 24.x (>=24.22.1), or 26.12.1+, plus npm. Additional tools and host support depend on the target:
| Target | What REA returns | Requirements and guide |
|---|---|---|
| Desktop installations | Runtime candidates, supporting files, component markers and next probes | Built-in bounded directory/header inspection; desktop applications |
| Native binaries | Pseudocode, assembly, strings, symbols, calls and references | Hopper, Ghidra, IDA or Kuna; native analysis |
| Offline ELF layout | Sections, segments, original symbols/relocations and static mitigation candidates | Caller-supplied pwntools on Linux x64; binary diagnostics |
| Go binaries | Embedded compiler version, modules, replacements and build settings | Built-in static ELF/PE/thin Mach-O inspection; no Go installation required |
| GPU code objects | CUDA/HIP targets, selected kernel parameters and resources, retained PTX text | Built-in static ELF/PE/fatbin/CUBIN/PTX inspection; GPU code objects |
| Model artifacts | GGUF / safetensors metadata, tensor declarations and derived totals | Built-in header inspection; optional full-file hash; model files |
| IL2CPP metadata | Unity global-metadata.dat assembly images, type and method names and index ranges | Built-in static decoding of versions 24, 27, 29, 31 and 39; no Unity required |
| Godot PCK | Archive inventory and extraction, original header/directory facts and selected content identities | Built-in static formats 2, 3 and 4; no Godot required |
| Rust binaries | Embedded cargo-auditable crate names, versions, sources and dependency edges | Built-in static ELF/PE/thin Mach-O inspection; Rust binaries |
| PE certificates | Authenticode WIN_CERTIFICATE entries and PKCS#7 signer/X.509 identity fields | Built-in static PE inspection; PE certificates |
| PE imports | Import and delay-load DLL names, ordinals, IAT RVAs and pefile import hash | Built-in static PE inspection; PE imports |
| Windows shortcuts | Shell Link target, arguments, working dir, ExtraData and Tracker droid facts | Built-in static LNK inspection; Windows shortcuts |
| ELF notes | PT_NOTE/SHT_NOTE owners, types, GNU build-id and ABI-tag fields | Built-in static ELF inspection; ELF notes |
| Binary hardening | PIE, NX, RELRO, CFG and related header flags for ELF, PE and Mach-O | Built-in static header inspection; binary hardening |
| Apple IPS crashes | .ips metadata, threads, images, registers and documented crash classes | Built-in static JSON inspection; Apple IPS |
| Linux kernel modules | .modinfo keys, __versions CRCs, this_module presence, and signature trailer | Built-in static ELF inspection; kernel modules |
| Erlang BEAM | IFF chunks, atoms, exports, imports, lambdas and the Code header | Built-in static BEAM inspection; Erlang BEAM |
| WASM artifact | Validation, sections, exact import/export WAT forms and decoded WAT | Caller-supplied WABT 1.0.42; inspect_wasm_artifact |
| EVM bytecode | Dispatch selectors, byte offsets, inferred arguments and mutability | Local raw/hex carrier on Linux x64; offline EVM guide |
| SQLite databases | Tables, columns, indexes, views, triggers and selected ordinary-table rows | Local database/WAL snapshot; Node.js 24.x >=24.15 or 26+ with native SQLite limits |
| Recorded Linux crashes | Raw notes, every recorded thread's registers/signals and optional mapping candidates | Caller-supplied pwntools on Linux x64; optional GDB/pwndbg; recorded crashes |
| JavaScript / Electron | Modules, imports, source maps, routes, IPC, native add-ons, rea audit-release-exposure |
Node.js and npm; Linux: procps-compatible ps; application analysis |
| Websites | Page structure, scripts, network observations and requested screenshots | A Chrome-family browser; browser analysis |
| Saved network captures | Requests, responses, exposed payloads and source locations | HAR or Fiddler Everywhere SAZ; mitmdump on Linux for native mitmproxy; capture guide |
| .NET assemblies | Metadata, CIL instructions, declared native dependencies and build comparisons | None (static only); managed-code guide |
| Android APKs | Manifest declarations, classes, decompiled methods and references | Headless JADX and a full JDK on Linux/macOS/Windows x64; Android guide |
| APK signatures | v1/v2/v3/v3.1 signers, certificate fingerprints, key rotation and digest self-consistency | None (static only); inspect_apk_signature |
| Android devices | Devices, packages, processes, logs, dumps, screen captures, and APK/file transfers | Caller-supplied adb (emulator or hardware); ADB guide |
| JEB projects | Engine-backed project units, artifact digests and type/method pseudo-code | A caller-started JEB client serving MCP, selected with REA_JEB_MCP_URL; JEB guide |
| Android resources | Decoded manifest, string tables, locales and version facts | Caller-supplied Apktool launcher; resource guide |
| Flutter apps | Dart snapshot hash, per-ABI library digests and engine build provenance | None (static APK parsing); Flutter guide |
| Firmware | Regions, extraction results and native-analysis handoffs | Binwalk / Unblob on Linux; firmware guide |
| Recorded packets | Selected fields, repeated values, filters and decode-as rules | Linux: TShark 4.x + prlimit; capture guide |
| Packet summaries | Endpoints, DNS, TLS SNI, protocol distribution and HTTP requests | Caller-supplied tshark and capinfos (Linux-verified); pcap guide |
| Recorded logic signals | Decoder annotations, sample ranges and diagnostics | Linux: sigrok-cli 0.7.2 + prlimit; signal recordings |
| Packages and resources | File inventories, digests, plists, Apple bundle anatomy and extracted resources | Artifact and JavaScript guide, Apple applications |
| Process behavior | Terminal output, interactions, exit and filesystem observations, and run comparisons | Linux/macOS with a native PTY; process capture |
| PyInstaller executables | CArchive members, Python version, entry scripts and extracted bytecode | None (static only); Python packaged applications |
| Deno compile binaries | Virtual files, entry point, recorded options, npm snapshot length | None (static only); Deno compile executables |
Static JavaScript and .NET inspection read the supplied files without running the application. Runtime capture runs or interacts with the selected target using your user permissions; each runtime guide describes its effects.
For offline native-binary inspection, REA also supports caller-supplied GNU objdump and Rizin. See the reverse-engineering tools guide for provider setup, CLI commands, and Evidence limitations. REA does not install or update either provider.
Native formats and host support vary by provider. See
Hopper and Ghidra setup, the
IDA guide (including an optional native MCP bridge), the
Kuna decompiler guide, and
experimental Windows Ghidra support.
Ghidra also supports 16-bit DOS analysis.
For large binaries, raise the provider's startup deadline with
REA_GHIDRA_STARTUP_TIMEOUT_MS or REA_HOPPER_STARTUP_TIMEOUT_MS.
For provider selection, see the CLI guide.
Check release availability
for features added since the latest npm release.
Showcases
DX-Ball: reconstruct a sound-pan calculation
Follow a sound call into its position-to-pan helper, inspect the instructions, and turn incomplete pseudocode into C. The reconstruction passes 3,205 original-x86 cases and reproduces all 63 compiled function bytes.
Read the case study · Reconstruction repository
Notion: trace the Electron clipboard bridge
Find the renderer's clipboard API, follow it through preload and IPC into the main process, and inspect the rich clipboard format.
TH04: recover a DOS bullet-ring calculation
Inspect the original PC-98 game's 16-bit instructions, recover the fixed and aimed angle calculations, and compare the reconstructed C++ with the historical compiler output.
Read the case study · Reconstruction repository
Build RL environments with REA
Record a web app session, turn its API into tools, and export an environment an AI agent can use. Run it with AgentEnv, then add tasks and reward checks for RL training or evaluation.
Read the guide · Watch the video
If you've used REA on something interesting, we'd love to see it. Share your case in an issue or a pull request, including the target, your question, how REA helped, and what you found.
Build RL environments
Give an AI agent a local environment to practice tasks such as finding an issue or creating a folder, without running the original app. Use it for reinforcement learning (RL) or to test how well an agent completes tasks.
REA turns recorded API requests and responses into tools the agent can call. The environment uses the recorded data and supports changes only when the recording confirms their effects.
With REA set up in your agent, replace the example URL and folder tasks below with your own:
Use REA to build an RL environment from my test web app at
http://127.0.0.1:3000.
Cover listing, creating, renaming, and deleting folders. You may create and
remove test folders. Leave existing data unchanged.
Save it in a folder named my-env. Check which operations work and tell me
how to run it.
Use the command line instead
Use these commands if you already have a file containing the app’s recorded browser requests and responses. Running the result also requires AgentEnv and Docker.
rea environment-build ./session.har ./my-env --name my-env --json
agent-env run ./my-env
REA exports a runnable environment with a basic test to check that it starts and responds. Use it with your RL framework to define task goals, add reward checks, and run training.
Build an environment · Environment reference · Watch the demo on X
Desktop app environments
REA can also build an environment of a Linux desktop app, which an agent uses through screenshots, the mouse and the keyboard. From a one-line request, such as "Build me a Gnote environment where the agent adds olive oil to the shopping list note", your agent installs the app on a local build computer, writes the task, exports the environment and checks the task in a fresh computer. The machine that builds it needs Linux on amd64 or arm64, Docker and the agentenv framework version the guide pins.
Set up desktop app environments
FAQ
Which agents can use REA?
Any agent that supports local MCP servers. Setup configures the supported agents; other clients can use manual MCP registration.
Do I need a native analysis engine?
Deep native analysis uses Hopper, Ghidra, IDA or Kuna, depending on the target and operation. Static JavaScript and .NET inspection work without a native analysis engine. Setup can install Hopper after approval; Ghidra, IDA and Kuna use your existing installations. See provider setup for the options and their supported targets.
Do I need to start Hopper first?
REA starts Hopper when an operation needs it. On macOS, a first-run dialog may ask you to choose demo mode or activate your license. Complete that prompt in the same user session before your first CLI/MCP operation or unattended job. Open Hopper manually if needed. See Hopper startup and troubleshooting.
What does installing the skill from skills.sh do?
The skill supplies investigation instructions for your agent. Use npx rea-agents setup
to register REA's MCP server and install the matching instructions, then restart
your agent. See skill-only installation.
What code does REA return?
Native analysis returns pseudocode and assembly. JavaScript/Electron analysis recovers modules and their relationships. Your agent uses these findings to write and test an implementation; the showcases give worked examples.
Does REA upload my app?
REA analyzes targets locally. Your agent receives the tool results, and its model provider has its own data policy.
What should I do if I hit a bug?
Update first; a recent release may already fix it.
For a CLI installed with npm install --global or bun add --global:
rea update
For agent setup through npx:
npx rea-agents@latest setup
If you're using an agent, complete the setup refresh and restart it. Retry the same task. If the problem persists, open an issue with your REA version, target type, steps to reproduce and error output.
Documentation
Start with the website's worked guides. For exact options, prerequisites and result contracts:
- Installation and setup: agent registration, provider configuration, updates and uninstall.
- Readiness and troubleshooting: diagnose one agent or analysis engine.
- CLI and Evidence: commands, provider selection, snapshots, import/export and exit statuses.
- MCP contracts and agent prompts: tool results, sessions and guided investigations.
- Tool catalog: generated inventory of tools, providers and CLI commands.
- Roadmap: planned work and capability trackers.
Report vulnerabilities through SECURITY.md.
Star history
🎉 400,000 GitHub stars — thank you!
Thanks to everyone using REA, reporting bugs, requesting features, testing builds, and contributing fixes.
Disclaimer
See DISCLAIMER.md for responsible-use guidance.
The project's position on illegal or unauthorized use covers all REA versions, distribution channels, and platforms; each copy retains its applicable licenses.
REA is for lawful research, education, interoperability, software preservation, and analysis of software you own or are authorized to examine.
Contributing
We'd love your help with REA! Open an issue to report a bug or suggest a feature, or send a pull request to improve the code or docs.
See CONTRIBUTING.md for development setup and checks, testing for verification lanes, and the architecture map for selected layers and dependency paths.
License
REA-authored code is licensed under MIT. Third-party material retains its own licenses and copyright notices; see Third-party notices for the dependency inventory, preserved license texts, and external-tool terms.
You must legally obtain and be authorized to use commercial tools, including IDA Pro / Hex-Rays decompilers, Hopper, and JEB, under their applicable licenses. REA grants no tool license, key, or activation entitlement. Trials and demos remain subject to vendor terms, including user, feature, automation, and output sharing restrictions. Cracked copies, stolen keys, unauthorized key sharing, and bypassing license restrictions are not authorized. This guidance does not amend MIT or third-party licenses.
